Price Pledge ensures we won't be beaten on price! We actively monitor the prices offered by our competitors daily and adjust our own pricing accordingly.
Price Pledge ensures we won't be beaten on price! We actively monitor the prices offered by our competitors daily and adjust our own pricing accordingly. We pledge to match the price on most products offered by UK based dealers that are selling officially imported or manufactured UK stock, with full manufacturer warranty and is authorised to do so by the relevant manufacturer.
Prior to the point of sale CVP will endeavour to match the price on most products subject (but not limited) to the following criteria:
For further details please call us on 02083807400.
Details of where you have found the cheaper item.
The prices shown are an estimate based on the purchase of a single item with nothing else in your basket. The prices and options do not include shipping regulations and duties which will be checked in the checkout process.
At CVP we always strive to get your order to you as quickly as possible, but in the interest of clarity please note that next day is defined as the next working day (ie: excluding weekends, UK bank holidays and public holidays).
Orders placed and security cleared before 14:00GMT where all items are in stock will normally be dispatched on the same business day for ultimate delivery according to the shipping method selected.
Where an item is not physically in stock, the actual delivery time will be extended by the lead time for the product in question. Shipping to the Channel Islands, Northern Ireland, Republic of Ireland and some remote UK postcodes are not next day but 2 working days.
All transactions are subject to CVP security checks which are for our mutual protection against identity theft and fraud. In the event that additional checks are required you will be informed and dispatch time will be extended by the time taken to resolve any queries raised. We apologise for any inconvenience this may cause.
*Due to unforseen circumstances, on some occasions same day dispatch may not be possible. In this event we will always do our utmost to keep you fully informed of any delay imposed.
The RB-SD1IP Silence detection unit is an upgraded version of the RB-SD1. The unit is a 1U rack mount device used to monitor an unattended stereo studio feed and in the event of the signal going “quiet” after a given period the unit will switch through an alternative stereo audio signal. This signal could be a recorded message (e.g. “Normal service will be resumed”, etc), a feed from a flashcard player, audio from a conected USB flash drive or an alternative recorded program. Controls are provided to start external equipment and to provide remote status indication.
The RB-SD1IP offers all of the functionality of the standard RB-SD1 with several extra capabilities. Ethernet connectivity provides the ability to set up and control the unit via a browser based GUI. The network capabilities allow the user to more finely control silence level (-60dBu to 0dBu in 3dBu steps) and silence duration (1 second to 10 minutes). You can also remotely lock/unlock the front panel controls on the unit and opt to use either the hardware configured settings or web based settings. In addition to the front panel LEDs the GUI home page offers a real time view of signal levels and alarm statuses.
Using the new browser GUI, left and right channels can be treated independently and remote relay triggers can be configured as one of many events including the new GPIO pins. You can also choose to lock/unlock the use of the remote pins to control the unit and firmware updates can also be performed using the web GUI.SNMP V1 is implemented so that the unit can be controlled by existing network management systems. The addition of 6 extra GPIO pins to the rear panel allows customisable functionality, including the use of the RB-SD1IP network interface to generate SNMP Traps on behalf of other, non-networked, hardware.The RB-SD1IP has been fitted with a USB interface on the front panel and can act as a host in two ways. Firstly the USB port can be used to upgrade the firmware on the unit from a USB flash drive. Secondly, such a drive can hold a pre-recorded message which the unit can play out in the event that both main and auxiliary signals fall silent.
|Maximum Input Level:||+28dBu|
|Maximum Output Level:||+28dBu|
|Frequency Response:||20Hz - 20kHz ±0.1db|
|Gain:||+12db (for unbal input B - optional)|
|Distortion:||As input for balanced input, -0.05% ref +8dbu output for unbalanced input|
|Input Impedance:||+100kΩ balanced|
|Output Impedance:||As input, except when using unbalanced auxiliary input where output impedance -50Ω|
|Noise:||+-87db, unity gain, ref +8dbu output for unbal input|
|Rear Panel Connections and Controls|
|Inputs (Main & Auxiliary):||4 x XLR 3 pin female (balanced, auxiliary can be unbalanced)|
|Output:||2 x XLR 3 pin male (balanced)|
|Remotes:||15 way D-Type plug|
|GPIO:||9 way D-Type plug|
|Alarm Threshold:||-15dBu to -60dbu in 3db steps via rotary switch|
|0dBu to -60dbu in 3db steps via web GUI|
|Silence Detect Duration:||2 - 30 seconds in 2 second intervals & 125 second option via rotary switch|
|1 second - 10 mins using web GUI|
|Detection Type:||Mono or stereo, via DIP switch|
|Mono, stereo, or dual mono via web GUI|
|Silence Switch Defeat:||Disable/enable silence switching, via DIP switch|
|Remote Start:||Latched or momentary, via DIP switch|
|Ethernet:||10/100Mbps on 1xRJ45 socket|
|Mains Input:||Filtered iec, continuously rated 85-264VAC @47-63hz 10W max|
|Fuse Rating:||Anti-surge fuse 1A 20 x 5mm (230VAC)|
|Front Panel Controls and Indicators|
|Controls (With Indicators):||Source select, mode select and restore|
|Indicator:||Program and alarm indicators for left and right source for both main and auxiliary channels, power indicator|
|Reset:||Recessed push button|
|USB Port:||1 x USB A socket|
|Dimensions (Raw):||48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)|
|19” (W) x 4.3” (D) x 1.7” (H) (1U)|
|Dimensions (Boxed):||58.5cm (W) x 22.5cm (D) x 7cm (H)|
|23” (W) x 8.9” (D) x 2.8” (H)|
|Weight:||Nett: 1.4kg Gross: 2.0kg|
|Nett: 3.1lbs Gross: 4.4lbs|
Key Features of the RB-SD1IP