The prices and shipping options are an estimate based on the purchase of a single item with nothing else in your basket. The prices and options below do not include shipping regulations and duties which will be checked in the checkout process.
At CVP we always strive to get your order to you as quickly as possible, but in the interest of clarity please note that next day is defined as the next working day (ie: excluding weekends, UK bank holidays and public holidays).
Orders placed and security cleared* before 14:00GMT where all items are in stock will normally** be dispatched on the same business day for ultimate delivery according to the shipping method selected.
Where an item is not physically in stock, the actual delivery time will be extended by the lead time for the product in question. Shipping to the Channel Islands, Northern Ireland, Republic of Ireland and some remote UK postcodes are not next day but 2 working days.
All transactions are subject to CVP security checks which are for our mutual protection against identity theft and fraud. In the event that additional checks are required you will be informed and dispatch time will be extended by the time taken to resolve any queries raised. We apologise for any inconvenience this may cause.
*Due to unforseen circumstances, on some occasions same day dispatch may not be possible. In this event we will always do our utmost to keep you fully informed of any delay imposed.
A dual, bi-directional rack-mounting (1U) stereo interface, for matching two pieces of semi-pro or domestic equipment, including cassette machines, video recorders and DAT machines for example, to the higher audio levels and differing connection methods of professional environments. This compact design is constructed in a 1U enclosure only 92mm deep, with all connections on the rear panel. For each piece of equipment there are four XLR connectors, two are female connecting to high-impedance, electronically-balanced, line-level inputs, and two are male, fed from electronically-balanced low-impedance, line-level outputs. These four connections are to interface with the professional environment, but may also be connected unbalanced without loss of level. They are designed to connect with up to 100m FST cable (or similar) to standard line-level (low source, high or bridging load impedance) interfaces. RCA (phono) connectors are provided to connect to the semi-pro device. All are connected unbalanced, and have an adjacent associated multi-turn gain control to adjust the operating level of the attached device to the line-up level of the pro environment. An IEC inlet with fuse provides connection to the mains supply (cable not included). The front panel has only an LED, to indicate power connection.
|Unbalanced to balanced sections|
|Maximum input level:||+22dBu|
|Nominal gain range:||0dB to +25dB|
|Output noise:||-94dB RMS re +8dBu O/P (20Hz-22kHz, +14dB gain), (input terminated 600ohms)|
|Harmonic distortion:||0.005%THD (1kHz, +8dBu O/P)|
|Frequency response:||20Hz-20kHz +/-0.1dB|
|Maximum output level:||+26dBu (10kohm load),+24dB (600ohm load)|
|Balanced to unbalanced sections|
|Maximum input level:||+22dBu|
|Input CMRR:||70dB, typical|
|Nominal gain range:||-25dB to 0dB|
|Output noise:||-94dB RMS re +8dBu I/P (20Hz-22kHz, -14dB gain) (600ohm input termination)|
|Harmonic distortion:||0.003%(1kHz THD, -14dBu O/P)|
|Frequency response:||20Hz-20kHz +/- 0.1dB|
|Maximum output level:||+22dBu (1000ohm load)|
|Power supply:||230V AC +/-10%, 6VA|
|Dimensions:||483(w) x 1U(h) x 92(d)mm|