The prices and shipping options are an estimate based on the purchase of a single item with nothing else in your basket. The prices and options below do not include shipping regulations and duties which will be checked in the checkout process.
At CVP we always strive to get your order to you as quickly as possible, but in the interest of clarity please note that next day is defined as the next working day (ie: excluding weekends, UK bank holidays and public holidays).
Orders placed and security cleared* before 14:00GMT where all items are in stock will normally** be dispatched on the same business day for ultimate delivery according to the shipping method selected.
Where an item is not physically in stock, the actual delivery time will be extended by the lead time for the product in question. Shipping to the Channel Islands, Northern Ireland, Republic of Ireland and some remote UK postcodes are not next day but 2 working days.
All transactions are subject to CVP security checks which are for our mutual protection against identity theft and fraud. In the event that additional checks are required you will be informed and dispatch time will be extended by the time taken to resolve any queries raised. We apologise for any inconvenience this may cause.
*Due to unforseen circumstances, on some occasions same day dispatch may not be possible. In this event we will always do our utmost to keep you fully informed of any delay imposed.
The MixPre-D sets a new standard for compact, high-performance portable audio mixers. Powered by only two-AA batteries or 10-18 VDC, the MixPre-D is designed specifically for audio professionals needing the most flexible connectivity in production applications where capturing great sound is important, but size and weight are a concern.
|Frequency Response||20 Hz - 30 kHz, +0.2, -0.5 dB (relative to 1 kHz level with 150 ohm source, gain controls set at 50%)|
|Equivalent Input Noise||126 dBu (-128 dBV) maximum mic in to line out, (150 ohm source, flat weighting, 22 Hz - 22 kHz bandwidth, gain control set at 50% or higher, phantom power off)|
|Input Clipping||10 dBu minimum (mic level), +28 dBu minimum (line level)|
|Output Clipping Level||Line: +22 dBu minimum with 100k ohm load, Mic: -18 dBu minimum with 100k ohm load|
|Gain||Mic to Line, max: 66 dB, Line to Line, max: 26 dB, Line to Mic, max: -14 dB, Mic to Mic, max: 26 dB, Mic (TA3) relative to Line out: -36 dB|
|Dynamic Range||110 dB minimum, mic input to line output|
|THD + Noise||0.05% maximum (from 50 Hz to 22 kHz @ +4 dBu output level)|
|Common Mode Rejection Ratio||100 dB minimum at 80 Hz, 60 dB minimum at 10 kHz|
|Inputs||Transformer-balanced, 2k mic input impedance, 16k line input impedance|
|Outputs||XLR-Line/Mic: active-balanced, 100 ohm output impedance, XLR- AES3: balanced, 110 ohm, two-channel, on right XLR connector, TA3: unbalanced mic-level output, pin-2 left, pin-3 right, pin- 1 ground, 200 ohm output impedance, Tape (3.5 mm)Unbalanced, tip-left, ring-right, sleeve-ground, 2.1k ohm output impedance|
|A/D Converter for USB||103 dB typical, A-weighted; sample rate selectable 44.1k, 48k, or 96k|
|Output Noise||-100 dBu (-102 dBV) maximum (22 Hz - 22 kHz bandwidth, flat filter)|
|High Pass Filters||80 Hz or 160 Hz (switch selectable), 6 dB per octave|
|Phantom Power||12-volt through 680 ohm resistors or 48-volt through 6.8k resistors (switch selectable)|
|Limiter||Threshold adjustable, +8 dBu to +18 dBu, 20:1 limiting ratio, 1 mS attack time, 200 mS release time.|
|Metering||16 segment x 2 GaN (Gallium Nitride) meters, peak + VU responding, wicked bright|
|Power||Internal: 2 AA alkaline batteries, 4 hours life typical, no phantom power, External: 10-17 VDC via 4-pin Hirose, pin 4 = +, pin 1 = -, completely isolated floating supply|
|USB Connectivity||USB class-compliant device, analog input to USB output, USB monitoring in headphones|
|Temperature||Operating: -20°C to 60°C, 0 to 95% relative humidity; (non-condensing), storage: -40°C to 85°C|
|Weight||0.7 kg, 1.5 lbs with batteries|
|Dimensions||43 mm x 94 mm x 140 mm (h x w x d), (1.7" x 3.7" x 5.5")|