Price Pledge ensures we won't be beaten on price! We actively monitor the prices offered by our competitors daily and adjust our own pricing accordingly.
Price Pledge ensures we won't be beaten on price! We actively monitor the prices offered by our competitors daily and adjust our own pricing accordingly. We pledge to match the price on most products offered by UK based dealers that are selling officially imported or manufactured UK stock, with full manufacturer warranty and is authorised to do so by the relevant manufacturer.
Prior to the point of sale CVP will endeavour to match the price on most products subject (but not limited) to the following criteria:
For further details please call us on 02083807400.
Details of where you have found the cheaper item.
The prices shown are an estimate based on the purchase of a single item with nothing else in your basket. The prices and options do not include shipping regulations and duties which will be checked in the checkout process.
At CVP we always strive to get your order to you as quickly as possible, but in the interest of clarity please note that next day is defined as the next working day (ie: excluding weekends, UK bank holidays and public holidays).
Orders placed and security cleared before 14:00GMT where all items are in stock will normally be dispatched on the same business day for ultimate delivery according to the shipping method selected.
Where an item is not physically in stock, the actual delivery time will be extended by the lead time for the product in question. Shipping to the Channel Islands, Northern Ireland, Republic of Ireland and some remote UK postcodes are not next day but 2 working days.
All transactions are subject to CVP security checks which are for our mutual protection against identity theft and fraud. In the event that additional checks are required you will be informed and dispatch time will be extended by the time taken to resolve any queries raised. We apologise for any inconvenience this may cause.
*Due to unforseen circumstances, on some occasions same day dispatch may not be possible. In this event we will always do our utmost to keep you fully informed of any delay imposed.
The 788T is a powerful eight input, twelve-track digital audio recorder designed for production sound. Building on the success of the proven 7-Series architecture, the 788T offers greatly expanded input and output connectivity while continuing the 7-Series heritage of extensive control in a compact package.
Its eight full-featured inputs ensure superb audio quality. They accept either microphone or line-level signals, provide 48 V phantom power for condenser microphones, offer peak limiters for microphone inputs, and fully adjustable high-pass filters. Support for AES42 digital microphones is also available. Extensive routing flexibility allows each input to be routed to left/right mixed tracks, isolated tracks, or aux tracks. With optional CL-8 Controller, the 788T is even easier to use, making the combination a flexible mixer/recorder, with lots of operational flexibility.
The 788T has three options for recording media, internal 160 GB SATA hard drive, CompactFlash media with UDMA support, or an external FireWire hard drive or DVD-RAM (with bus powering). Any or all of these can be used simultaneously. Additionally, when connected to Mac OS, or Windows computers with high-speed USB or FireWire 400/800, the 788T functions as a high-speed mass storage device.
To simplify interconnection with mixers and cameras with AES3 connectivity, the 788T has eight channels of balanced AES3 digital input and six channels of balanced AES3 output. The 788T can be clocked from external word clock or from video sync. The 788T has a high-accuracy time code reader/generator on board. It includes auto-record features to chase external rec-run video sources. To simplify metadata entry the 788T directly accepts USB keyboards. Keyboard shortcuts can be programmed to control menu items and machine transport. The extensive power of the 788T simplifies any production sound setup.
|Sampling Frequency||internal: 32, 44.1, 47.952, 48, 48.048, 88.2, 96, 96.096|
|external clocking: 32-96.096 kHz via word clock or digital inputs|
|Internal Data Path and Processing||32 bit, 192 dB dynamic range|
|A/D, D/A Converters||24 bit, 96.096 kHz sample rate maximum|
|A/D Dynamic Range||123 dB, A-weighted bandwidth|
|120 dB, 20 Hz-22 kHz bandwidth|
|D/A Dynamic Range||114 dB, A-weighted bandwidth|
|111 dB, 20 Hz-22 kHz bandwidth|
|Metering||112-segment (8 x 14), sunlight-viewable, selectable peak, VU, or peak (with or without peak hold) with VU ballistics, variable brightness|
|Frequency Res. Mic or Line||10 Hz-20 kHz, +0.1, -0.5 (gain controls centered, measured at 48 kHz)|
|THD + Noise||Mic: 0.004% max (1 kHz, 22 Hz-22 kHz BW, gain control down, -15 dBu input); line: 0.004% max (1 kHz, 22 Hz-22 kHz BW, gain control down, +16 dBu input)|
|Gain||(input dBu to -20 dBFS)|
|Mic: Off (0) to 76.0 dB Line: Off, -26.0 to 50.0 dB|
|Input Impedance||Mic (XLR and TA3): 3.3k ohm; Line (XLR and TA3): 3.3k ohm|
|Input Clipping Level||Mic input: +8 dBu minimum (gain = 10 dB); line input: +26 dBu minimum (gain = 0 dB)|
|Input Topology Mic and Line||fully electronically balanced, RF, ESD, short, and overload protected; pin-2 hot, pin-3 cold|
|Gain Matching Mic/Line inputs||0.1 dB increments, channel-to-channel while linked|
|Common Mode Rejection Ratio||Mic: 40 dB minimum at 80 Hz|
|High-Pass Filters||40-320 Hz in 10Hz steps @ 6/12 dB/oct (Setup Menu selectable)|
|Mic Powering||(each analog input selectable): 48 V phantom through 6.8k resistors, 10 mA per mic available, menu-selected per channel in mic or line level positions|
|Mic/Line Input Limiters||Variable threshold -12 to -2 dBFS; Infinite:1 limiting ratio, 2 mS attack time, menu-selectable release time 200-2000 mS, soft-knee starting approximately 6dB below setting.|
|Line Output Clipping Level||+24 dBu minimum, 10k ohm load|
|Attenuation & Resolution||0-20 dB, 1 dB increments|
|Output Topology Line||fully electronically-balanced, RF, ESD, short, and overload protected; pin-2 driven hot, pin-3 driven cold; let pin-3 float for unbalanced connections.|
|I/O - Digital||Balanced AES in 1-8 on DE15 connector 110 ohm, 2 V p-p, AES and S/PDIF compatible with RCA adaptor, AES42 mode 1 compatible and provides 10 V to AES42 microphones|
|AES3 Balanced AES out 1-4 on TA3 connector; Balanced AES out 5-6 on DE15 connector 110 ohm, 2 Vp-p, AES and S/PDIF compatible with RCA adaptor;|
|Digital Storage||internal hard drive SATA interface 2.5-in hard drive 4200-7200 RPM supported, FAT32 formatted, up to 2 TB addressable|
|CompactFlash CF type I, II, and + (microdrive) compatible, UDMA (300x) compatible, FAT32 formatted, up to 2 TB addressable|
|File Types||Record: WAV (AES-31 format), mono or polyphonic, at supported Fs, 24-bit or 16-bit;|
|Playback: WAV (AES-31 format), mono or polyphonic, at supported Fs, 24-bit or 16-bit;|
|MP3 @ 32, 64, 96, 128, 160, 192, 256, or 320 kb/s stereo; MP2 @ 64, 96, 128, 160, 192, 256, or 320, 384 kb/s stereo|
|Utilities||Drive formatting and speed test for internal hard drive, CF and external drive volumes|
|Data Transfer / Control||FireWire 400: For connection to external drives and computers: IEEE-1394a compliant, 6-pin FireWire, Windows 2000, XP, Vista, 7) Mac OS X only|
|FireWire 800: For connection to external drives and computers: IEEE-1394b compliant, 8-pin FireWire, Windows (2000, XP, Vista, 7), Mac OS X only|
|USB 2.0: Slave mode only. For connection to Windows( 2000, XP, Vista,7) Mac OS X only|
|USB Keyboard Input: For connection to USB keyboards for entering notes and controlling features and functions of the 788T via user selectable keyboard shortcuts.|
|Time Code||Modes Supported: Off, free run, record run, 24 hour run, external time code receive|
|Frame Rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND, 30+|
|Accuracy: 0.2 ppm, when tuned with Ambient Master Controller, holds TC clock for 4 hours after main battery removal; after 4 hours, retains time of day|
|Input / Output 20k ohm impedance, 0.3V p-p (-8 dBu) minimum / 1k ohm impedance, 3.0V p-p (+12 dBu)|
|Word Source||Internal Sync: internal word clock generator|
|External Sync Input: Word Clock, AES3, or Video (NTSC, PAL, and Tri-Level)|
|Word Clock Output: Square wave, running at sample rate, 3.3 V p-p, 75 ohm|
|Power||Power supply (batteries): operating cell, removable 7.2 V (nominal) Sony L-type Li-ion, operational from 6.5-8.5 V, time code battery, internal 3.6 Li-ion|
|Power supply (external): 10-18 V, 1000 mA minimum, via locking 4-pin Hirose connector, use Hirose #HR10-7P-4P (DigiKey# HR100-ND) for locking mating DC connector; pin-1 (-), pin-4 (+).|
|Environmental||Operation and Storage ambient temperature 5-55C, relative humidity (non-condensing) 80%|
|Other||Tone Oscillator: 100 Hz-10 kHz, variable output, assigned to tracks or outputs (menu-selectable)|
|Dimensions and Weight||Size: 45 mm x 257 mm x 163 mm (H x W x D) 1.8 x 10.1 x 6.4 inches|
|Mass||unpackaged: 1.7 kg,(3 lbs 12 oz.) without battery|