Please choose a department

Paralinx Arrow HD

Price Pledge

Price Pledge ensures we won't be beaten on price! We actively monitor the prices offered by our competitors daily and adjust our own pricing accordingly.

At a glance
Paralinx Arrow HD - Full HD 1080p / 10-bit uncompressed Wireless HD Video Link (p/n AR1)

Price Pledge

Price Pledge ensures we won't be beaten on price! We actively monitor the prices offered by our competitors daily and adjust our own pricing accordingly.

31443
Catalogue:
paralinx_arrow-hd / AR1

Price Pledge

Price Pledge ensures we won't be beaten on price! We actively monitor the prices offered by our competitors daily and adjust our own pricing accordingly.

Unfortunately we no longer sell this product
The product details shown, are provided for historical reference only. Check out our suggestions


Ordered It And It Arrived Very Promptly
Great Service

Read More

Great Products
Great Products Fast Delivery

Read More


Shipping Calculator

Please select Country
Please enter postcode
Estimated Shipping

Terms and conditions

The prices and shipping options are an estimate based on the purchase of a single item with nothing else in your basket. The prices and options below do not include shipping regulations and duties which will be checked in the checkout process.

At CVP we always strive to get your order to you as quickly as possible, but in the interest of clarity please note that next day is defined as the next working day (ie: excluding weekends, UK bank holidays and public holidays).

Orders placed and security cleared* before 14:00GMT where all items are in stock will normally** be dispatched on the same business day for ultimate delivery according to the shipping method selected.

Where an item is not physically in stock, the actual delivery time will be extended by the lead time for the product in question. Shipping to the Channel Islands, Northern Ireland, Republic of Ireland and some remote UK postcodes are not next day but 2 working days.

All transactions are subject to CVP security checks which are for our mutual protection against identity theft and fraud. In the event that additional checks are required you will be informed and dispatch time will be extended by the time taken to resolve any queries raised. We apologise for any inconvenience this may cause.

*Due to unforseen circumstances, on some occasions same day dispatch may not be possible. In this event we will always do our utmost to keep you fully informed of any delay imposed.

For more information on shipping, please read our Delivery and Collection or please our Terms and Conditions

Product Details

Overview
Unlike any other HD wireless product ever made, the Paralinx Arrow HD Wireless Kit, smashes the conceptions of performance, size and value.Featuring a true 1080p uncompressed 10-bit signal, the Arrow can travel line-of-sight up to an astounding 300′+ from transmitter to receiver without signal break-up or image degradation.
In environments without line-of-sight or walls, the Arrow can reach distances of up to 200′+.
Latency is less than 2 milliseconds!  All this in a tiny sub 8-ounce weight transmitter and receiver.Each Arrow Kit includes a Transmitter, Receiver, and power adapter cable. More specs, details and photos will be added shortly.  Arrow kits begin shipping June 16!  Pre-order yours now to reserve one of the first 100 Paralinx Arrows.
Both Arrow transmitter and receiver Feature long life from a 5V DC power input.  The receiver has an HDMI (1.3 compliant) output.  All standard HD resolutions and...
Included in box
  • Arrow Transmitter
  • Arrow Receiver
  • USB Regulator Cable (P-Tap)
  • AC Adapter for Receiver
  • AC Adapter for Transmitter
  • Right-Angle Mini-USB to USB Power Cable for Transmitter
  • Barrel-USB Power Cable for Receiver
  • HDMI Coupler
  • Remote Control (for Firmware Updates and Linking Purposes)
  • IR Cable for Use with Remote Control
  • 1-Year Limited Warranty

About the Paralinx Arrow HD

Unlike any other HD wireless product ever made, the Paralinx Arrow HD Wireless Kit, smashes the conceptions of performance, size and value.Featuring a true 1080p uncompressed 10-bit signal, the Arrow can travel line-of-sight up to an astounding 300′+ from transmitter to receiver without signal break-up or image degradation.

In environments without line-of-sight or walls, the Arrow can reach distances of up to 200′+.

Latency is less than 2 milliseconds!  All this in a tiny sub 8-ounce weight transmitter and receiver.Each Arrow Kit includes a Transmitter, Receiver, and power adapter cable. More specs, details and photos will be added shortly.  Arrow kits begin shipping June 16!  Pre-order yours now to reserve one of the first 100 Paralinx Arrows.

Both Arrow transmitter and receiver Feature long life from a 5V DC power input.  The receiver has an HDMI (1.3 compliant) output.  All standard HD resolutions and frame rates are supported.The Arrow is both FCC and CE certified.

* Paralinx Arrow HD does not pass through SD signals. It will only work with 720p, 1080i & 1080p.

InterfaceHDMI
Frequency Bands5.1 - 5.8 GHz
Supported Video Uncompressed, 4:2:2, 10-bit
1080p, 1080i, 720p, 576p, 480p
23.98p, 24p, 25p, 29.97p, 30p, 50i, 50p, 59.94i, 60i, 60p
Transmission Distance Up to 300 ft (91 m), line-of-sight
LatencyLess than 2 ms
Encryption256-bit
CertificationFCC, CE, and ROHS
PowerOperates on 5 V (transmitter requires 1A, receiver 2.1A)
Dimensions
Transmitter:3.7 x 1.3 x 0.5" (9.4 x 3.3 x 1.3 cm)
Receiver:4 x 2.4 x 1" (10.2 x 6 x 2.5 cm)
Does it support 1080p60 or only 30?
Asked on 09/07/2014 | 1 Answers
0
From the Manufacturers web site:-

Arrow and Arrow Plus systems support the following framerates:

23.98p, 24p, 25p, 29.97p, 30p, 50i, 50p, 59.94i, 60i, 60p

This includes the NTFS and PAL formats.
Answered on 2014-07-09 14:28:22 CVP Staff
Can I assume that the signal from the receiver can be used for both HD 1080p recording and live transmission. Would I need a twin receiver setup?
Asked on 26/11/2013 | 1 Answers
0
The Arrow supports only one receiver and has a single HDMI out. Does both your recorder and transmission system accept HDMI in and does one of them have a 'loop' output so you can feed both from the single output of the Arrow? If not, other solutions are:- HDMI splitter ( one input, two outputs ). Use Arrow Plus rather than Arrow - it supports up to 4 receivers. Use HDMI to HDSDI convertor and feed that via distribution amp if necessary to your recorder and transmission system if indeed they accept HDSDI input. You have not given enough information in your question to provide a definitive answer.
Answered on 2013-11-26 17:55:18 CVP Staff
In theory could you use the Paralinx to transmit video from a Sony EX3 straight into a Plasma screen for a live feed at an event and would audio be transmitted too?
Asked on 18/09/2013 | 1 Answers
0
The EX3 has HDSDI out, the Paralinx needs HDMI in. So you'd need to use one of these between the two:-

http://www.creativevideo.co.uk/index.php?t=product/blackmagic_battery-converter-sdi-hdmi

You don't say what inputs your monitor has so you might also need a convertor of some description between the Paralinx receiver and monitor if it doesn't have an HDMI input. Convertor model would depend on what inputs your monitor does have.

Alternatively, you could consider the Teradek Bolt:-

http://www.creativevideo.co.uk/index.php?t=product/teradek_bolt_txrx

but again you might need a convertor at the monitor end....



Answered on 2013-09-18 17:51:57 CVP Staff
How much does the transmitter weigh?
Asked on 07/03/2013 | 1 Answers
0
39g

mw
Answered on 2013-03-07 16:56:15 CVP Staff
Hi thereI have a couple of questions about Paralinx before I buy one as its seems to be what I need.What connection is the power input on the transmitter ? Do you supply that cable ?What is the power in for the receiver ?What connections are on the video output for connecting to a monitor, screen , pc etc ?ThanksWhats the turn around as I need one within the next few weeks Ian C
Asked on 18/01/2013 | 1 Answers
0
Here's a full list of the kit contents:-

1. Sender
2. Receiver
3. D-Tap to USB power lead ( with voltage conversion )
4. 2x mains (13A) plug to USB adapter
5. USB to 90 degree Mini USB cable 30cm
6. Co-ax DC connector to USB
7. Mini HDMI to HDMI converter
8. Back to back HDMI connector
9. HDMI cable
10. Infra red remote control
11. Infra red sensor on approx 1m cable
12. Quick Start Guide

As you can see, the transmitter can be powered from a D-Tap or USB power source and both cables are provided. The Receiver is also powered from a USB power source and two Mains to USB PSU's are included. Video in to the transmitter and Video out from the receiver are both HDMI 1.4.

At the time of writing, mid Jan 13, we have stock and can ship for next day delivery following cleared payment.
Answered on 2013-01-18 14:14:34 CVP Staff
I just have one question is it support the sound ...I mean can I hear the sound when I am recording .....thanks
Asked on 03/01/2013 | 1 Answers
0
Yes, sound is supported and output from the receiver on the HDMI connector. There is no separate analogue sound output.
Answered on 2013-01-03 16:35:20 CVP Staff
Hi can you run more than one Paralinx Arrow in the same geographical location?
Asked on 28/11/2012 | 1 Answers
0
Yes, Paralinx report using 6 sets simultaneously in one location with no problems
Answered on 2012-11-28 16:17:57 CVP Staff
Do you what the transmitter current consumption is ? (ie how much it draws from the camera D-tap before conversion to 5v). Thanks.
Asked on 24/10/2012 | 1 Answers
0
880mA
Answered on 2012-10-24 09:15:42 CVP Staff
Thinking of this as a solution for Alexa. What are your suggestions for converter setup SDI-HDMI? etc. Can you supply all the bits needed to just setup and use on the Alexa?
Asked on 10/10/2012 | 1 Answers
0
Yes, we can supply everything necessary. On of our Sales team will be in touch soon to establish your precise requirements.
Answered on 2012-10-10 12:55:44 CVP Staff
Hello,What is in the box? Power cables, down converter 12v - 5v, HDMI cables, arrow holders / socket, D-tap... ?Thanks
Asked on 11/10/2012 | 1 Answers
0
Contents of the box:

1. Sender
2. Receiver
3. D-Tap to USB power lead ( with voltage conversion )
4. 2x mains (13A) plug to USB adapter
5. USB to 90 degree Mini USB cable 30cm
6. Co-ax DC connector to USB
7. Mini HDMI to HDMI converter
8. Back to back HDMI connector
9. HDMI cable
10. Infra red remote control
11. Infra red sensor on approx 1m cable
12. Quick Start Guide

df
Answered on 2012-10-11 14:10:23 CVP Staff
Paralinx inform me that they believe it will pass SD 576i as well as 1080i. Have you tried it at SD as you believe it is HD only.
Asked on 09/10/2012 | 1 Answers
0
We tried it and it didn't work. It is possible however that at some point in the future a firmware update could change that situation.....
Answered on 2012-10-09 12:53:34 CVP Staff
What input formats does the transmitter? (ie will it transmit 50i SD as well as HD) and also - does it support audio over HDMI?thanks.
Asked on 30/09/2012 | 1 Answers
0
The Paralinx Arrow is an HD only product. Yes, embedded audio is passed through the transmission path.
Answered on 2012-09-30 19:03:57 CVP Staff
What is the transmission delay / latency on this device?
Asked on 24/09/2012 | 1 Answers
0
The delay is less than 2 MS Latency.
Answered on 2012-09-24 14:51:59 CVP Staff
Do you need a license from ofcom to use this item?
Asked on 19/09/2012 | 1 Answers
0
This unit operates within the following parameters:

5725-5875 MHz / 25 mW e.i.r.p. / 20 MHz

Therefore the Paralinx Arrow qualifies as a "License exempt short range device" as specified by OFCOM. -
Answered on 2012-09-19 10:32:15 CVP Staff
Are there any mounting points (threaded holes) on the receiver so that it can be mounted somewhere using a noga arms or something like that?
Asked on 08/08/2012 | 1 Answers
0
The receiver has a standard 1/4-20 threaded hole on the bottom for mounting to a magic arm or any standard bracket.
Answered on 2012-08-08 15:01:38
Is it possible to link two or more receivers to the same transmitter, thus allowing to monitor the same signal to a number of displays?
Asked on 08/08/2012 | 1 Answers
0
At this time, the units are paired in a one to one fashion.

Paralinx have informed us they working on a solution to allow one transmitter to send to 4 receivers, and then another layer that will allow up to 200 receivers. As soon as we receive any news on this update, we will update accordingly.
Answered on 2012-08-08 15:01:37
Hi,We are a reseller and would like to see a spec sheet for the Paralinx Arrow. Most importantly, which frequency does it transmit on?
Asked on 13/07/2012 | 1 Answers
0
The ARROW transmits in 4 band ranges:

1. 5150 - 5250mhz
2. 5250 - 5350 (able to be turned on and off in the on screen display) mhz
3. 5470 - 5725 (able to be turned on and off in the on screen display) mhz
4. 5725 - 5850 mhz

and is capable of utilizing Dynamic Frequency selection in the various bands to avoid interference. Transmission power is less than 50mw.
Answered on 2012-07-13 09:09:16
[[faq_question]]

Frequently Asked Questions

17 question(s) | 17 answers(s)

Does it support 1080p60 or only 30?

jaan kronberg 09-07-2014

From the Manufacturers web site:-Arrow and Arrow Plus systems support the following framerates:23.98p, 24p, 25p, 29.97p, 30p, 50i, 50p, 59.94i, 60i, 60pThis includes the NTFS and PAL formats.

Can I assume that the signal from the receiver can be used for both HD 1080p recording and live transmission. Would I need a twin receiver setup?

Paul McCabe 26-11-2013

The Arrow supports only one receiver and has a single HDMI out. Does both your recorder and transmission system accept HDMI in and does one of them have a 'loop' output so you can feed both from the single output of the Arrow? If not, other solutions are:- HDMI splitter ( one input, two outputs ). Use Arrow Plus rather than Arrow - it supports up to 4 receivers. Use HDMI to HDSDI convertor and feed that via distribution amp if necessary to your recorder and transmission system if indeed they accept HDSDI input. You have not given enough information in your question to provide a definitive answer.

In theory could you use the Paralinx to transmit video from a Sony EX3 straight into a Plasma screen for a live feed at an event and would audio be transmitted too?

Martin 18-09-2013

The EX3 has HDSDI out, the Paralinx needs HDMI in. So you'd need to use one of these between the two:-http://www.creativevideo.co.uk/index.php?t=product/blackmagic_battery-converter-sdi-hdmiYou don't say what inputs your monitor has so you might also need a convertor of some description between the Paralinx receiver and monitor if it doesn't have an HDMI input. Convertor model would depend on what inputs your monitor does have.Alternatively, you could consider the Teradek Bolt:-http://www.creativevideo.co.uk/index.php?t=product/teradek_bolt_txrxbut again you might need a convertor at the monitor end....

How much does the transmitter weigh?

jon 07-03-2013

39gmw

Hi thereI have a couple of questions about Paralinx before I buy one as its seems to be what I need.What connection is the power input on the transmitter ? Do you supply that cable ?What is the power in for the receiver ?What connections are on the video output for connecting to a monitor, screen , pc etc ?ThanksWhats the turn around as I need one within the next few weeks Ian C

ian cormack 18-01-2013

Here's a full list of the kit contents:-1. Sender2. Receiver3. D-Tap to USB power lead ( with voltage conversion )4. 2x mains (13A) plug to USB adapter5. USB to 90 degree Mini USB cable 30cm6. Co-ax DC connector to USB7. Mini HDMI to HDMI converter8. Back to back HDMI connector9. HDMI cable10. Infra red remote control11. Infra red sensor on approx 1m cable12. Quick Start GuideAs you can see, the transmitter can be powered from a D-Tap or USB power source and both cables are provided. The Receiver is also powered from a USB power source and two Mains to USB PSU's are included. Video in to the transmitter and Video out from the receiver are both HDMI 1.4.At the time of writing, mid Jan 13, we have stock and can ship for next day delivery following cleared payment.

I just have one question is it support the sound ...I mean can I hear the sound when I am recording .....thanks

visualmed 03-01-2013

Yes, sound is supported and output from the receiver on the HDMI connector. There is no separate analogue sound output.

Hi can you run more than one Paralinx Arrow in the same geographical location?

Matthew Drew 28-11-2012

Yes, Paralinx report using 6 sets simultaneously in one location with no problems

Do you what the transmitter current consumption is ? (ie how much it draws from the camera D-tap before conversion to 5v). Thanks.

ChrisL 24-10-2012

880mA

Thinking of this as a solution for Alexa. What are your suggestions for converter setup SDI-HDMI? etc. Can you supply all the bits needed to just setup and use on the Alexa?

Robert Horwell 10-10-2012

Yes, we can supply everything necessary. On of our Sales team will be in touch soon to establish your precise requirements.

Hello,What is in the box? Power cables, down converter 12v - 5v, HDMI cables, arrow holders / socket, D-tap... ?Thanks

Patrick Tresch 11-10-2012

Contents of the box:1. Sender2. Receiver3. D-Tap to USB power lead ( with voltage conversion )4. 2x mains (13A) plug to USB adapter5. USB to 90 degree Mini USB cable 30cm6. Co-ax DC connector to USB7. Mini HDMI to HDMI converter8. Back to back HDMI connector9. HDMI cable10. Infra red remote control11. Infra red sensor on approx 1m cable12. Quick Start Guidedf

Paralinx inform me that they believe it will pass SD 576i as well as 1080i. Have you tried it at SD as you believe it is HD only.

Frank Leggett 09-10-2012

We tried it and it didn't work. It is possible however that at some point in the future a firmware update could change that situation.....

What input formats does the transmitter? (ie will it transmit 50i SD as well as HD) and also - does it support audio over HDMI?thanks.

Chris Loughlin 30-09-2012

The Paralinx Arrow is an HD only product. Yes, embedded audio is passed through the transmission path.

What is the transmission delay / latency on this device?

john 24-09-2012

The delay is less than 2 MS Latency.

Do you need a license from ofcom to use this item?

Chris Goor 19-09-2012

This unit operates within the following parameters:5725-5875 MHz / 25 mW e.i.r.p. / 20 MHzTherefore the Paralinx Arrow qualifies as a "License exempt short range device" as specified by OFCOM. -

Are there any mounting points (threaded holes) on the receiver so that it can be mounted somewhere using a noga arms or something like that?

08-08-2012

The receiver has a standard 1/4-20 threaded hole on the bottom for mounting to a magic arm or any standard bracket.

Is it possible to link two or more receivers to the same transmitter, thus allowing to monitor the same signal to a number of displays?

diego cervo 08-08-2012

At this time, the units are paired in a one to one fashion. Paralinx have informed us they working on a solution to allow one transmitter to send to 4 receivers, and then another layer that will allow up to 200 receivers. As soon as we receive any news on this update, we will update accordingly.

Hi,We are a reseller and would like to see a spec sheet for the Paralinx Arrow. Most importantly, which frequency does it transmit on?

André Austvoll 13-07-2012

The ARROW transmits in 4 band ranges:1. 5150 - 5250mhz 2. 5250 - 5350 (able to be turned on and off in the on screen display) mhz 3. 5470 - 5725 (able to be turned on and off in the on screen display) mhz 4. 5725 - 5850 mhz and is capable of utilizing Dynamic Frequency selection in the various bands to avoid interference. Transmission power is less than 50mw.

Do you have a question about the Paralinx Arrow HD ?

We want to publish your question, so please:

  • keep your question focused on the product
  • avoid writing about customer service; contact us instead if you have issues requiring immediate attention
  • refrain from mentioning competitors or the specific price you paid for the product
  • do not include any personally identifiable information, such as full names
  • or how about these?

    SUBSCRIBE

    Please enter your email address below to sign up for product news, promotions, updates and events