PLEASE NOTE: Camera not inlcuded
Wearable Gimbal for Action Cameras
Capture your world steadily in an new way with Rider-M. This stabiliser only weighs 180g, easy to carry and simple to use. The Rider-M could be flexibly attached to helmets, motorbikes, car or other objects during your rigorous extreme sports. Features 640° pan rotation angle makeing your vision broader.
You can control the Rider-M with the Zhiyun Assistant app or remote controller over Bluetooth. You can switch modes, adjust camera angles, monitor the status of your Rider-M, and also customize your favorite settings within seconds.
Charge Your Camera from Gimbal Power
You can charge the camera by connecting to the gimbal. Do not need to take many GoPro batteries. This will help lighten the load in your backpack.
Point and lock
Quickly lock your camera into any position by manually pointing and holding it in any direction. After a few seconds the camera will lock and hold its position until it is reset back to default.
3.5mm Output Port
With the 3.5mm AV output port on the side of the handle, just plug a monitor and you can catch a real-time image.
Zhiyun Core Technology
Zhiyun gimbal is the first in the industry to achieve 32-bit Triple-MCUs running in parallel at 4K HZ frequency that is far beyond the reach of others. The Rider-M is designed a magnetic encoder in each motor, the self-developed stabilization algorithms helps the Rider-M control the camera to 0.02 degree accuracy within 0.25 millisecond.
640° Pan Motor, Panorama Shooting
The pan motor rotates 640 degrees, it is easy to give you an unlimited range and get panorama shooting during operation.
In lock mode, the yaw, pitch, and roll axis work together to keep the camera pointed in one direction. The camera will stay still no matter how you move the handle.
Two Follow Modes
The Rider-M features 2 different following modes. In Yaw-Axis follow mode, the Rider-M will only follow your pan movements. In pitch and yaw-axis follow mode, the Rider-M will follow your pan and tilt movements.
1/4 inch Thread
The 1/4” thread located at the bottom of handle allows you to securely mount the Rider-M to a tripod, monopod, jib etc.
Moving up and down, right or left, switching the three models is all operated by the 5-directional joystick.
Download the latest firmware online and update your Crane instantly if you want to take advantage of new features.