Z-Finder EVF Pro – This is a complete EVF with diopter. It includes the EVF Flip model and an optical viewfinder, which will snap onto the frame on the monitor and can flip up 180 degrees. The optical viewfinder contains high quality 2.5x optics with anti-fog shields and a diopter. The anti-fog is extremely important for reducing fog. It will also include extender frames. The Z-Finder Extender Frames allow you to further adjust the focal point of the Z-Finder by semi-permanently stacking the frames via a snap fit on to the skirt of the Z-Finder until the LCD screen is in focus for you. If you want to be able to use your Z-Finder on your camera LCD screen, you will need to purchase the gorilla plate and frame separately. It is not included in this kit.
Zacuto is changing the game again! We are transforming the form factor of DSLR cameras for video use with our Z-Finder EVF. The Z-Finder EVF is a 3.2” high resolution monitor that will be used in conjunction with all the Z-Finder models. The Z-Finder EVF allows you to operate the DSLR camera with the correct form factor for video with the camera "in-line" to your rod system (the most stable way) and your eye in the Z-Finder EVF. This is the way all film cameras and ENG video cameras were operated and we, at Zacuto, believe this should be the way DSLR cameras should be operated. It will enhance the stability, give you better resolution, allow you to get your eye where it most comfortably needs to be, enable low mode shooting, have your EVF in the back of a dolly or crane, detached from the rig for car shots and more.
Zacuto Z-Finder EVF 3.2” monitor has higher resolution than DSLR LCD screens. These screens have a resolution of 640×480 on a 3:2 aspect ratio screen. Therefore, you only effectively see the resolution at 640×360 in 16×9. The Zacuto Z-Finder EVF monitor resolution is a true 800×480 making the resolution 56% greater than the on-board DSLR camera screens. The Zacuto monitor also has a tighter dot pitch which also improves the quality, making you see a much tighter pixel pattern.
Actual 16×9 screen
.087 dot pitch
HDMI loop through
Operates off Canon LP-E6 Camera battery (1/2 day power)
Includes a hot shoe mount or optional articulating arm kit.
Can mount to other manufacturer's rig (RedRock, Cinevate, Letus, etc.) via 1/4 20 screw, 15mm rod or articulating arm
All Z-Finder models snap on and off the EVF and can be used interchangeably between the camera screen or EVF screen
Includes mini HDMI cable
|Size||3.2 inch TFT LCD IPS LED
|Resolution||800 X 480
|Viewing Angle||H:170 Degrees V:170 degrees
|View Area||70.6mm (H) X 42.76mm (V)
|Battery||7.2V canon LP-E6 or Equivalent
|External||12 Volt Power Adapter Optional
|Video Input/Output||HDMI 480i/480p/576p/720p/1080i
|Operating Temperature||-4F to +158F / -20C to +70C
|Storage Temperature||-22F to +176F / -30C to +80C
|Power Consumption||2.5W (5.2 hours w/1800mAH Battery)|
3.2 inch Monitor with flip-up function, HDMI loop through and USB port for fimware updates
Z-FInder Loupe with 2.5x magnification, dipter wheel, cover and antifog
18 inch Standard to Mini HDMI Cable
HDMI Right Angle Adapter
Z-Finder Sun Mask
Hotshoe EVF Mount
1/4 20 inch Mounting Thread
International Power Adapters
EVF Dust Cover