This website uses cookies. By continuing to browse the site you are agreeing to our use of cookies.
0.67041516304016
Miller 478 Feet - Set of 3
Miller (478) Set of 3 HD Rubber Feet for the HD MB 1-Stage Tripod
£291.27
£349.52 inc VAT
Add to Basket
Wishlist
>
>
> Miller 478 Feet - Set of 3
Cat no:miller_478_feet / 478
Miller 478 Feet - Set of 3
Miller (478) Set of 3 HD Rubber Feet for the HD MB 1-Stage Tripod
Please wait while checking stock....
£291.27
£349.52 inc VAT
349.52
Saving: £38.85 (10%)
|
List Price: £388.37 inc VAT
UNITED STATES $374.99 No VAT
eu €318.67 + VAT
Add to Basket
Notify me when this product is in stock
Your Email:
You may be interested in this
OConnor Mitchell Base
£294.00
£352.80 inc VAT

Similar products you may be interested in

Quick Info
Add to Basket
Miller 475 Feet- Set of 3 for Sprinter II & HD Tripods with 993 Mid Level Spreaders
Miller 475 Feet- Set of 3
Green tick
2 in stock
£76.09
£91.31 inc VAT
Close
Miller 475 Feet- Set of 3
Miller 475 Feet- Set of 3 for Sprinter II & HD Tripods with 993 Mid Level Spreaders
Green tick
2 in stock
£76.09
£91.31 inc VAT
The 475 detachable rubber feet provide stable support for your camera on any surface. No matter what position before setup, with Miller’s unique design the feet will always place flat upon the surface on your location. No more bending down to position feet curled inside the tripod. The 475 rubber feet are supplied as a set of three and suit...
Full Details
Add to Basket
Quick Info
Add to Basket
Freefly Toad, Male Adapter Mount x1 for the MoVI M10 and M5 Camera Gimbals (p/n 910-00026)
Freefly Toad Male Mount
Green tick
4 in stock
£60.43
£72.52 inc VAT
Close
Freefly Toad Male Mount
Freefly Toad, Male Adapter Mount x1 for the MoVI M10 and M5 Camera Gimbals (p/n 910-00026)
Green tick
4 in stock
£60.43
£72.52 inc VAT
The Toad male adapter allows for a MōVI with the Toad In The Hole (female adapter) attached to quickly mount to other filming carriers, such as a crane, jib, or car mount in a matter of seconds.  Fiddling around with alignment is not required when engaging the Quick Release - just attach and rotate to the desired angle (from 0-360°)...
Full Details
Add to Basket
Quick Info
Add to Basket
Kessler CS1020 (CS-1020) All-Terrain Outrigger Feet for the Cineslider and Pocket Dolly Slider
Kessler All-terrain feet
Green tick
2 in stock
£214.30
£257.16 inc VAT
Close
Kessler All-terrain feet
Kessler CS1020 (CS-1020) All-Terrain Outrigger Feet for the Cineslider and Pocket Dolly Slider
Green tick
2 in stock
£214.30
£257.16 inc VAT
Kessler All-Terrain Outrigger feature a sturdy adjustable foot system for the CineSlider & Pocket Dolly sliders. These 360 degree adjustable legs are perfect for supporting our sliders in just about any situation. With indexable locking lever knobs you can easily tighten the legs into any position. Use these in place of the regular Outrigger Feet when more than 2" of...
Full Details
Add to Basket
Quick Info
Add to Basket
Miller 550 Feet - for Toggle Tripods sold with the 835 or 508 above ground spreaders (set of 3)
Miller 550 Feet- Set of 3
Attention
Estimated 2-3 working days*
£76.09
£91.31 inc VAT
Close
Miller 550 Feet- Set of 3
Miller 550 Feet - for Toggle Tripods sold with the 835 or 508 above ground spreaders (set of 3)
Attention
Estimated 2-3 working days*
£76.09
£91.31 inc VAT
The 550 standard rubber feet are supplied as a set of three and suit all tripods sold with the 835 or 508 Above Ground spreaders....
Full Details
Add to Basket
Quick Info
Add to Basket
Sachtler 7004 Rubber Feet 100/150 for 100/150mm Tripods with Mid-Level Spreader (except Cine tripods) and SOOM Tripod
Sachtler 7004 Rubber Feet
Green tick
1 in stock
£187.00
£224.40 inc VAT
Close
Sachtler 7004 Rubber Feet
Sachtler 7004 Rubber Feet 100/150 for 100/150mm Tripods with Mid-Level Spreader (except Cine tripods) and SOOM Tripod
Green tick
1 in stock
£187.00
£224.40 inc VAT
Sachtler 7004 set of 3 rubber feet 100/150 with rubber locking.For 100/150mm tripods with mid-level spreader (except Cine tripods) and SOOM tripod....
Full Details
Add to Basket

The 478 rubber feet from Miller is designed  for use in situations where spiked feet are not ideal. The rubber feet come in a set of 3 and is compatible with HD MB 1-Stage Tripod (alloy)

  • Quick and easy pullover rubber
  • Stirrups to secure tripod legs
  • Tough durable composite polymer
  • Rubber foot pad for extra grip
  • Foot Dimensions:80 x 40mm
    Weight:0.54 kg (1.2 lbs)
  • 3x Rubber Feet
  • Quick Info
    Add to Basket
    Miller 475 Feet- Set of 3 for Sprinter II & HD Tripods with 993 Mid Level Spreaders
    Miller 475 Feet- Set of 3
    Green tick
    2 in stock
    £76.09
    £91.31 inc VAT
    Close
    Miller 475 Feet- Set of 3
    Miller 475 Feet- Set of 3 for Sprinter II & HD Tripods with 993 Mid Level Spreaders
    Green tick
    2 in stock
    £76.09
    £91.31 inc VAT
    The 475 detachable rubber feet provide stable support for your camera on any surface. No matter what position before setup, with Miller’s unique design the feet will always place flat upon the surface on your location. No more bending down to position feet curled inside the tripod. The 475 rubber feet are supplied as a set of three and suit...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Freefly Toad, Male Adapter Mount x1 for the MoVI M10 and M5 Camera Gimbals (p/n 910-00026)
    Freefly Toad Male Mount
    Green tick
    4 in stock
    £60.43
    £72.52 inc VAT
    Close
    Freefly Toad Male Mount
    Freefly Toad, Male Adapter Mount x1 for the MoVI M10 and M5 Camera Gimbals (p/n 910-00026)
    Green tick
    4 in stock
    £60.43
    £72.52 inc VAT
    The Toad male adapter allows for a MōVI with the Toad In The Hole (female adapter) attached to quickly mount to other filming carriers, such as a crane, jib, or car mount in a matter of seconds.  Fiddling around with alignment is not required when engaging the Quick Release - just attach and rotate to the desired angle (from 0-360°)...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler CS1020 (CS-1020) All-Terrain Outrigger Feet for the Cineslider and Pocket Dolly Slider
    Kessler All-terrain feet
    Green tick
    2 in stock
    £214.30
    £257.16 inc VAT
    Close
    Kessler All-terrain feet
    Kessler CS1020 (CS-1020) All-Terrain Outrigger Feet for the Cineslider and Pocket Dolly Slider
    Green tick
    2 in stock
    £214.30
    £257.16 inc VAT
    Kessler All-Terrain Outrigger feature a sturdy adjustable foot system for the CineSlider & Pocket Dolly sliders. These 360 degree adjustable legs are perfect for supporting our sliders in just about any situation. With indexable locking lever knobs you can easily tighten the legs into any position. Use these in place of the regular Outrigger Feet when more than 2" of...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Miller 550 Feet - for Toggle Tripods sold with the 835 or 508 above ground spreaders (set of 3)
    Miller 550 Feet- Set of 3
    Attention
    Estimated 2-3 working days*
    £76.09
    £91.31 inc VAT
    Close
    Miller 550 Feet- Set of 3
    Miller 550 Feet - for Toggle Tripods sold with the 835 or 508 above ground spreaders (set of 3)
    Attention
    Estimated 2-3 working days*
    £76.09
    £91.31 inc VAT
    The 550 standard rubber feet are supplied as a set of three and suit all tripods sold with the 835 or 508 Above Ground spreaders....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Sachtler 7004 Rubber Feet 100/150 for 100/150mm Tripods with Mid-Level Spreader (except Cine tripods) and SOOM Tripod
    Sachtler 7004 Rubber Feet
    Green tick
    1 in stock
    £187.00
    £224.40 inc VAT
    Close
    Sachtler 7004 Rubber Feet
    Sachtler 7004 Rubber Feet 100/150 for 100/150mm Tripods with Mid-Level Spreader (except Cine tripods) and SOOM Tripod
    Green tick
    1 in stock
    £187.00
    £224.40 inc VAT
    Sachtler 7004 set of 3 rubber feet 100/150 with rubber locking.For 100/150mm tripods with mid-level spreader (except Cine tripods) and SOOM tripod....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Used Kessler CS1020 (CS-1020) All-Terrain Outrigger Feet for the Cineslider and Pocket Dolly Slider
    Used Kessler All-terrain feet
    Green tick
    1 in stock
    £161.15
    £193.38 inc VAT
    Close
    Used Kessler All-terrain feet
    Used Kessler CS1020 (CS-1020) All-Terrain Outrigger Feet for the Cineslider and Pocket Dolly Slider
    Green tick
    1 in stock
    £161.15
    £193.38 inc VAT
    Kessler All-Terrain Outrigger feature a sturdy adjustable foot system for the CineSlider & Pocket Dolly sliders. These 360 degree adjustable legs are perfect for supporting our sliders in just about any situation. With indexable locking lever knobs you can easily tighten the legs into any position. Use these in place of the regular Outrigger Feet when more than 2" of...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    OConnor 150mm Ball Base (p/n 8414)
    OConnor 8414 150mm Ball Base
    Green tick
    2 in stock
    £326.00
    £391.20 inc VAT
    Close
    OConnor 8414 150mm Ball Base
    OConnor 150mm Ball Base (p/n 8414)
    Green tick
    2 in stock
    £326.00
    £391.20 inc VAT
    OConnor 150mm Ball Base (p/n 8414)...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    OConnor Mitchell Base - optional base for 1030D, 1030Ds, 2065 and 2575 (pn 08281)
    OConnor Mitchell Base
    Green tick
    1 in stock
    £294.00
    £352.80 inc VAT
    Close
    OConnor Mitchell Base
    OConnor Mitchell Base - optional base for 1030D, 1030Ds, 2065 and 2575 (pn 08281)
    Green tick
    1 in stock
    £294.00
    £352.80 inc VAT
    Optional base for 1030D, 1030Ds, 2065 and 2575 [base supplied in some head packages]...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    CineMilled CM-203 (CM203) Ronin Steadicam Armpost Adaptor - 7/8 inch for Glidecam X-10 Stabilizer
    CineMilled CM-203 Adaptor
    Green tick
    1 in stock
    £203.64
    Was: £247.92
    £244.37 inc VAT
    Close
    CineMilled CM-203 Adaptor
    CineMilled CM-203 (CM203) Ronin Steadicam Armpost Adaptor - 7/8 inch for Glidecam X-10 Stabilizer
    Green tick
    1 in stock
    £203.64
    £244.37 inc VAT
    Mount your DJI Ronin to a steadicam arm for 4th axis vertical stabilization and take the weight off your arms with this armpost adaptor for Glidecam X-10 systems. Simply mount this adaptor to your CineMilled Ronin Quick Plate then slide your handlebars through it  and  slide your RONIN into the mount and secure. Then have an assistant help you slide the...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    OConnor Assistants Front Box (p/n CSE-MFB100)
    OConnor Front Box
    Green tick
    7 in stock
    £242.25
    Was: £281.00
    £290.70 inc VAT
    Close
    OConnor Front Box
    OConnor Assistants Front Box (p/n CSE-MFB100)
    Green tick
    7 in stock
    £242.25
    £290.70 inc VAT
    OConnor Assistants Front Box (p/n CSE-MFB100) ...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    MYT Works 75mm Doughnut (Bowl) (p/n 1310)
    MYT Works 75mm Doughnut
    Green tick
    1 in stock
    £142.11
    Was: £165.41
    £170.53 inc VAT
    Close
    MYT Works 75mm Doughnut
    MYT Works 75mm Doughnut (Bowl) (p/n 1310)
    Green tick
    1 in stock
    £142.11
    £170.53 inc VAT
    The first 100 and 75mm Doughnuts with the ability to level the head! So simple and yet no one offers one! Until now. The operator can level the tripod head as he or she would on a traditional Hi-Hat bowl. 1/4-20 thread points allow for the use of our MYT Mini Rods (in lengths ranging from 1" to 5"). Our...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Used MYT Works 100mm Doughnut (Bowl) (p/n 1309)
    Used MYT Works 100mm Doughnut
    Green tick
    5 in stock
    £124.17
    £149.00 inc VAT
    Close
    Used MYT Works 100mm Doughnut
    Used MYT Works 100mm Doughnut (Bowl) (p/n 1309)
    Green tick
    5 in stock
    £124.17
    £149.00 inc VAT
    The 100mm doughnut has the ability to level the head. So simple and yet no one offers one - until now. The operator can level the tripod head as he or she would on a traditional Hi-Hat bowl. 1/4-20 thread points allow for the use of our MYT Mini Rods (in lengths ranging from 1" to 5"). The doughnut works...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Manfrotto 529B (529-B) Hi Hat
    Manfrotto 529B Hi Hat
    Attention
    Estimated < 2 weeks*
    £140.83
    £169.00 inc VAT
    Close
    Manfrotto 529B Hi Hat
    Manfrotto 529B (529-B) Hi Hat
    Attention
    Estimated < 2 weeks*
    £140.83
    £169.00 inc VAT
    Manfrottos new Hi-Hat enables you to get shots from the dogs perspective. The 529B has adjustable leg angles to mount the camera in the tightest or lowest of locations - and thanks to the built - in spreader you can simply use the 529B on any even surface. The feet are rubber-padded to protect delicate surfaces and have a hole...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler TH1016 (TH-1016) 100mm Ball Kit for levelling video heads on tripods with 100mm bowl
    Kessler 100mm Ball Kit
    Attention
    Estimated 4-6 weeks*
    £59.97
    £71.96 inc VAT
    Close
    Kessler 100mm Ball Kit
    Kessler TH1016 (TH-1016) 100mm Ball Kit for levelling video heads on tripods with 100mm bowl
    Attention
    Estimated 4-6 weeks*
    £59.97
    £71.96 inc VAT
    Kessler Half ball for leveling video heads on tripods with 100mm bowl. Adapts flat-base video heads for tripods with 100mm bowl. Will also allow for mounting to a 75mm bowl tripod, as well.*With its 100mm levelable ball, the Ball Mount can be mounted to tripod legs with a 100mm bowl. *With its 75mm fixed ring mount, the Ball Mount can be...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    MYT Works 1/4 Inch - 20 Thread Bullseye Level (p/n 1107)
    MYT Works 20 Bullseye Level
    Attention
    Estimated 4-6 weeks*
    £20.74
    £24.89 inc VAT
    Close
    MYT Works 20 Bullseye Level
    MYT Works 1/4 Inch - 20 Thread Bullseye Level (p/n 1107)
    Attention
    Estimated 4-6 weeks*
    £20.74
    £24.89 inc VAT
    There is more than "meets the eye" on the MYT Bullseye spirit level. Made of stainless steel with a 1/4"-20 thread, the MYT Bulleye can easily be unscrewed and placed pretty much anywhere on the MYT Glide, MYT Galaxy Line or MYT Rovers. Each order of a MYT camera support system comes with one of our Bullseye Levels. If you'd...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler TH1005 (TH-1005) K-Pod Spiked Feet for the K-Pod Tripod
    Kessler K-Pod Spiked Feet
    Attention
    Estimated 4-6 weeks*
    £21.39
    £25.67 inc VAT
    Close
    Kessler K-Pod Spiked Feet
    Kessler TH1005 (TH-1005) K-Pod Spiked Feet for the K-Pod Tripod
    Attention
    Estimated 4-6 weeks*
    £21.39
    £25.67 inc VAT
    100% stainless steel spiked feet for the Kessler K-Pod Tripod System. Set of 3....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Manfrotto 438 Ball Camera Leveller
    Manfrotto 438 Leveller
    Attention
    Estimated < 2 weeks*
    £62.50
    £75.00 inc VAT
    Close
    Manfrotto 438 Leveller
    Manfrotto 438 Ball Camera Leveller
    Attention
    Estimated < 2 weeks*
    £62.50
    £75.00 inc VAT
    The 438 is fitted between tripod and head and provides easy, fast levelling for tripods without built-in levelling mechanisms. Its range of movement is 10°....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Manfrotto 183 (18-3) Aluminium Table For Projectors
    Aluminium Table For Projectors
    Attention
    Estimated < 2 weeks*
    £37.49
    £44.99 inc VAT
    Close
    Aluminium Table For Projectors
    Manfrotto 183 (18-3) Aluminium Table For Projectors
    Attention
    Estimated < 2 weeks*
    £37.49
    £44.99 inc VAT
    Made of sturdy aluminium, this 25 x 35cm platform can support up to 20kg. It is ideal as a projector or monitor stand....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Ronford Baker 80053 (RF.80053) Above (Hi-Hat) on Alloy Plate (Triangular)
    Ronford-Baker 80053
    Attention
    Estimated < 7 working days*
    £410.00
    £492.00 inc VAT
    Close
    Ronford-Baker 80053
    Ronford Baker 80053 (RF.80053) Above (Hi-Hat) on Alloy Plate (Triangular)
    Attention
    Estimated < 7 working days*
    £410.00
    £492.00 inc VAT
    Above (Hi-Hat) mounted on a triangular Alloy Plate. Hi-Hats are dieal when a low angle camera position is desired....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Manfrotto 236 (23-6) Spiked Foot For Monopod
    Spiked Foot For Monopod
    Attention
    Estimated < 2 weeks*
    £12.78
    £15.34 inc VAT
    Close
    Spiked Foot For Monopod
    Manfrotto 236 (23-6) Spiked Foot For Monopod
    Attention
    Estimated < 2 weeks*
    £12.78
    £15.34 inc VAT
    Converts 679, 680 and 681 series monopods rubber foot to a spiked foot....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Manfrotto 556B (556-B) Levelling Centre Column for 190Pro
    Levelling Centre Column
    Attention
    Estimated < 2 weeks*
    £115.79
    £138.95 inc VAT
    Close
    Levelling Centre Column
    Manfrotto 556B (556-B) Levelling Centre Column for 190Pro
    Attention
    Estimated < 2 weeks*
    £115.79
    £138.95 inc VAT
    Our innovative system means you can quickly level your photo or video head without needing to make time-consuming adjustments to the length and angle of each single tripod leg. One of the most common problems in still photography and, above all, video has been resolved by Manfrotto, thanks to the use of a 50mm diameter levelling half ball mounted at...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Vinten 3497-3B (34973B) OB Skid for HDT-1 and HDT-2 Heavy Duty Tripods
    Vinten 3497-3B OB Skid
    Attention
    Estimated < 7 working days*
    £1,448.89
    £1,738.67 inc VAT
    Close
    Vinten 3497-3B OB Skid
    Vinten 3497-3B (34973B) OB Skid for HDT-1 and HDT-2 Heavy Duty Tripods
    Attention
    Estimated < 7 working days*
    £1,448.89
    £1,738.67 inc VAT
    The Heavy Duty [HD] Skid is available in both Studio and OB configurations and features a maximum capacity of 160 kg / 352.8 lbs. Fast action foot operated brakes are fitted as standard and in addition the Studio version includes cable guards and track locks....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Sachtler 7014 Rubber Feet EX for Sachtler Cine Long and Cine Medium Tripods (6295, 6290, 6250 and 6255)
    Sachtler 7014 Rubber Feet
    Attention
    Estimated < 7 working days*
    £205.46
    £246.55 inc VAT
    Close
    Sachtler 7014 Rubber Feet
    Sachtler 7014 Rubber Feet EX for Sachtler Cine Long and Cine Medium Tripods (6295, 6290, 6250 and 6255)
    Attention
    Estimated < 7 working days*
    £205.46
    £246.55 inc VAT
    Sachtler 7014 Rubber feet with excenter locking for use with Sachtler tripods listed below: Cine Mitchell medium (6255) Cine Mitchell long (6295) Cine 150 medium (6250) Cine 150 long (6290)...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Manfrotto 441SCK2 (441-SCK2) Suction Cup Set Tube D20,4TR
    Suction Cup Set Tube D20,4TR
    Attention
    Estimated < 2 weeks*
    £29.12
    £34.94 inc VAT
    Close
    Suction Cup Set Tube D20,4TR
    Manfrotto 441SCK2 (441-SCK2) Suction Cup Set Tube D20,4TR
    Attention
    Estimated < 2 weeks*
    £29.12
    £34.94 inc VAT
    A rubber section cup feet (set of 3) with retractable stainless steel spike. The suction cup increases the suitable area of foot of the monopod by almost 20 times, giving much greater stability when needed. The foot can be removed and replaced at will....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Manfrotto 230 (23-0) Set of 3 Tripod Snow Shoes
    Tripod Snow Shoes - x3
    Attention
    Estimated < 2 weeks*
    £16.66
    £19.99 inc VAT
    Close
    Tripod Snow Shoes - x3
    Manfrotto 230 (23-0) Set of 3 Tripod Snow Shoes
    Attention
    Estimated < 2 weeks*
    £16.66
    £19.99 inc VAT
    Attach to tripod feet or monopods to provide stability in snow, mud or soft ground (set of 3)....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Miller 2110G Single-stage Alloy ENG Tripod with HD Mitchell Base and 95kg Payload Capacity to suit Ground Spreader (2110G)
    Miller 2110 1-Stage Alloy Tripod
    Attention
    Estimated 2-3 working days*
    £1,590.55
    £1,908.66 inc VAT
    Close
    Miller 2110 1-Stage Alloy Tripod
    Miller 2110G Single-stage Alloy ENG Tripod with HD Mitchell Base and 95kg Payload Capacity to suit Ground Spreader (2110G)
    Attention
    Estimated 2-3 working days*
    £1,590.55
    £1,908.66 inc VAT
    The HD Heavy Duty ENG tripod range features adjustable flip locks for quick setup and easy maintenance. This solid single stage 150mm alloy support offers stable studio camera support....
    Full Details
    Add to Basket

    Explore More

    Questions and Answers about the Miller 478 Feet - Set of 3

    Name:
    Email:
    Question:
    Ask us a question
    Please enter your question into the field
    Submit Question

    What our customers say about CVP

    Read all the latest reviews on Trustpilot about CVP

    Our promise to you

    Website security and privacy policy

    We take your security and privacy very seriously. This document details the information about you that we collect, how we use it and the steps we take to ensure that it is kept secure. If you have any questions about this privacy policy or the security of this website please contact us.
    By using this web site you consent to us collecting and using personal information about you as specified in this policy. We may update this Privacy Policy from time to time, so please check back here regularly.

    Fast worldwide shipping

    Wherever you’re located you can rely on us to provide rapid delivery through our carefully selected global network of carriers.
    Our logistics department work closely with our sales support team in order to determine the most cost-effective carriage method available that can meet your preferred delivery timescale. We will arrange full insurance cover against loss or damage during international transit and customers with their own cargo insurance can elect to self-insure.
    All consignments are carefully and robustly packed in order to minimise any risk of damage during transit and large shipments are often palletised and film-wrapped.
    VAT is not charged to EU business customers who provide a valid VAT registration number. VAT numbers are validated through the VIES VAT number validation portal.

    Shopping Basket 0 Item(s):
    £0.00
    Estimated Shipping:
    Shipping Details
    Available Shipping Price
    --
    :
    £0.00
    Copyright © 1986-2017 | CVP Group | CVP Blog E&OE 19 August 2017 10:27 BST

    Subject to status. Terms and Conditions apply. Creative Video Productions Ltd acts as a broker and offers finance from a restricted range of finance providers.
    Finance provided by PayPal Credit, a trading name of PayPal (Europe) S.à r.l. et Cie, S.C.A., 22-24 Boulevard Royal L-2449, Luxembourg