This website uses cookies. By continuing to browse the site you are agreeing to our use of cookies.
1.8855679035187
Kessler Kwik LONG Plate
Kessler MG1004 (MG-1004) Kwik LONG Camera Plate (1/4 - 20)
£34.25
£41.10 inc VAT
Add to Basket
Wishlist
>
>
> Kessler Kwik LONG Plate
Cat no:kessler_kwik-long-plate / MG1004
Kessler Kwik LONG Plate
Kessler MG1004 (MG-1004) Kwik LONG Camera Plate (1/4 - 20)
Please wait while checking stock....
£34.25
£41.10 inc VAT
41.10
UNITED STATES $44.53 No VAT
eu €39.61 + VAT
Add to Basket

Similar products you may be interested in

Quick Info
Add to Basket
Kessler CS1020 (CS-1020) All-Terrain Outrigger Feet for the Cineslider and Pocket Dolly Slider
Kessler All-terrain feet
Green tick
2 in stock
£214.30
£257.16 inc VAT
Close
Kessler All-terrain feet
Kessler CS1020 (CS-1020) All-Terrain Outrigger Feet for the Cineslider and Pocket Dolly Slider
Green tick
2 in stock
£214.30
£257.16 inc VAT
Kessler All-Terrain Outrigger feature a sturdy adjustable foot system for the CineSlider & Pocket Dolly sliders. These 360 degree adjustable legs are perfect for supporting our sliders in just about any situation. With indexable locking lever knobs you can easily tighten the legs into any position. Use these in place of the regular Outrigger Feet when more than 2" of...
Full Details
Add to Basket
Quick Info
Add to Basket
Kessler TH1017 100mm to 75mm Bowl Adapter (TH1017)
Kessler 100mm Bowl Adapter
Green tick
2 in stock
£25.68
£30.82 inc VAT
Close
Kessler 100mm Bowl Adapter
Kessler TH1017 100mm to 75mm Bowl Adapter (TH1017)
Green tick
2 in stock
£25.68
£30.82 inc VAT
Converts a 100mm bowl into a 75mm bowl. Precision machined by Kessler....
Full Details
Add to Basket
Quick Info
Add to Basket
Kessler CJ1014 (CJ-1014) Pocket Jib Camera Crane without Swivel Mount
Kessler Pocket Jib Crane
Green tick
2 in stock
£857.32
£1,028.78 inc VAT
Close
Kessler Pocket Jib Crane
Kessler CJ1014 (CJ-1014) Pocket Jib Camera Crane without Swivel Mount
Green tick
2 in stock
£857.32
£1,028.78 inc VAT
The Kessler Pocket Jib™ is the ultimate compact, portable jib. Not only is this jib fully collapsible for easy transport, but you can also mount the Kessler Pocket Dolly™ or CineSlider™ to it, turning it into a virtual "all-in-one" production tool, offering both a jib and mini-dolly in one unit. The Pocket Jib™ has a telescopic dual rail arm design that...
Full Details
Add to Basket
Quick Info
Add to Basket
Kessler KC-Lite 8.0 Camera Crane (Crane Only)
Kessler KC-Lite 8.0
Green tick
1 in stock
£342.90
£411.48 inc VAT
Close
Kessler KC-Lite 8.0
Kessler KC-Lite 8.0 Camera Crane (Crane Only)
Green tick
1 in stock
£342.90
£411.48 inc VAT
The Kessler KC-Lite 8.0 has been designed to be the best "economy" crane on the market. For the filmmaker shooting on a tight budget, using a lighter digital video or DSLR camera under 10 pounds, we feel the KC-Lite is the highest quality camera crane / jib in the sub $400 price range. Based off the design of our standard...
Full Details
Add to Basket
Quick Info
Add to Basket
Kessler MG1016 (MG-1016) Kessler Kwik Slider Plate (formerly Kwik Mini Utility Plate)
Kessler Kwik Slider Plate
Green tick
1 in stock
£42.83
£51.40 inc VAT
Close
Kessler Kwik Slider Plate
Kessler MG1016 (MG-1016) Kessler Kwik Slider Plate (formerly Kwik Mini Utility Plate)
Green tick
1 in stock
£42.83
£51.40 inc VAT
Use this plate to attach a slider to a Kwik Release system or even mount accessories like monitors, microphones, lights, etc. via the many 1/4"-20 and 3/8"-16 thread holes.  ...
Full Details
Add to Basket

Use this plate with the Kessler Kwik Release System for larger cameras or when greater adjustability is needed.

Mini & short quick release plates and utility plates are also available see the accessories tab!

Dimensions: 2 x 6
Plate Travel: 4.576"
  • 1x Kessler Kwik LONG Camera Plate
  • 2x 1/4"-20 Camera Screw
  • Recommend Accessories
    Camera Support Rigs
    Tripods & Support
    Quick Info
    Add to Basket
    Kessler MG1001 (MG-1001) Kwik Release Plate
    Kessler Kwik Release Plate
    Green tick
    10 in stock
    £119.99
    £143.99 inc VAT
    Close
    Kessler Kwik Release Plate
    Kessler MG1001 (MG-1001) Kwik Release Plate
    Green tick
    10 in stock
    £119.99
    £143.99 inc VAT
    The Kwik Release System is a unique, patent pending mounting system featuring solid billet aluminum and stainless steel construction. With a one hand drop-in instant latching and push button drop-gate release, this mounting system is strong, secure, fast and easy to use. Once the mounting plate is snapped into the receiver, the plate can be adjusted but it cannot slide out...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler MG1006 (MG-1006) Low Profile Ball Head 3/8-16
    Kessler Low Pro Head 3/8-16
    Green tick
    1 in stock
    £128.56
    £154.27 inc VAT
    Close
    Kessler Low Pro Head 3/8-16
    Kessler MG1006 (MG-1006) Low Profile Ball Head 3/8-16
    Green tick
    1 in stock
    £128.56
    £154.27 inc VAT
    The Kessler Low Profile Ball Head is an easy to use, ultra-low profile ball head system with a heavy duty weight capacity. The strong locking ball has 62 degrees of total adjustability. It features a 3/8”-16 thread stud on the top and bottom providing easy mounting to all the Kessler sliders and Shuttle Pods, without the need for an adapter....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler MG1005 (MG-1005) Kwik Utility Plate
    Kessler Kwik Utility Plate
    Attention
    Estimated 4-6 weeks*
    £51.40
    £61.68 inc VAT
    Close
    Kessler Kwik Utility Plate
    Kessler MG1005 (MG-1005) Kwik Utility Plate
    Attention
    Estimated 4-6 weeks*
    £51.40
    £61.68 inc VAT
    Use this plate with the Kessler Kwik Release System (See Accessories) for mounting Kessler sliders, the REVOLUTION Head, High Hats or even mount accessories like monitors, microphones, lights, etc. via the many 1/4"-20 and 3/8"-16 thread holes....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler MG1010 (MG-1010) Multi-Angle Mounting Plate
    Kessler Multi-Angle Plate
    Attention
    Estimated 4-6 weeks*
    £85.69
    £102.83 inc VAT
    Close
    Kessler Multi-Angle Plate
    Kessler MG1010 (MG-1010) Multi-Angle Mounting Plate
    Attention
    Estimated 4-6 weeks*
    £85.69
    £102.83 inc VAT
    The Kessler Multi-Angle Mounting Plate is designed to work in conjunction with the Kessler Low Profile Ball Head. The mounting plate can be attached in a 45° or 90° configuration and, coupled with the range of movement of the Low Profile Ball Head, will allow for configuring you camera at just about any angle you desire. The ability to mount...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler TH1006 (TH-1006) K-Pod 6 inch Standard Wheels for the K-Pod Tripod
    Kessler K-Pod standard Wheels
    Attention
    Estimated 4-6 weeks*
    £77.12
    £92.54 inc VAT
    Close
    Kessler K-Pod standard Wheels
    Kessler TH1006 (TH-1006) K-Pod 6 inch Standard Wheels for the K-Pod Tripod
    Attention
    Estimated 4-6 weeks*
    £77.12
    £92.54 inc VAT
    Standard 6" (inch) dual-locking caster wheels for the K-Pod tripod System. Set of 3....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler CS1001 (CS-1001) CineSlider Traveler with Removable Crank Handle
    Kessler CineSlider Traveler
    Attention
    Estimated 4-6 weeks*
    £943.06
    £1,131.67 inc VAT
    Close
    Kessler CineSlider Traveler
    Kessler CS1001 (CS-1001) CineSlider Traveler with Removable Crank Handle
    Attention
    Estimated 4-6 weeks*
    £943.06
    £1,131.67 inc VAT
    Kessler CineSlider Traveler The Kessler Traveler CineSlider™ is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds. Weighing in at only 7.7 pounds, with a length of 28.5 inches, 5 inches wide, and a total camera travel distance of 19 inches, the CineSlider traveler is a very portable solution to get those quick,...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler CS1020 (CS-1020) All-Terrain Outrigger Feet for the Cineslider and Pocket Dolly Slider
    Kessler All-terrain feet
    Green tick
    2 in stock
    £214.30
    £257.16 inc VAT
    Close
    Kessler All-terrain feet
    Kessler CS1020 (CS-1020) All-Terrain Outrigger Feet for the Cineslider and Pocket Dolly Slider
    Green tick
    2 in stock
    £214.30
    £257.16 inc VAT
    Kessler All-Terrain Outrigger feature a sturdy adjustable foot system for the CineSlider & Pocket Dolly sliders. These 360 degree adjustable legs are perfect for supporting our sliders in just about any situation. With indexable locking lever knobs you can easily tighten the legs into any position. Use these in place of the regular Outrigger Feet when more than 2" of...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler TH1017 100mm to 75mm Bowl Adapter (TH1017)
    Kessler 100mm Bowl Adapter
    Green tick
    2 in stock
    £25.68
    £30.82 inc VAT
    Close
    Kessler 100mm Bowl Adapter
    Kessler TH1017 100mm to 75mm Bowl Adapter (TH1017)
    Green tick
    2 in stock
    £25.68
    £30.82 inc VAT
    Converts a 100mm bowl into a 75mm bowl. Precision machined by Kessler....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler CJ1014 (CJ-1014) Pocket Jib Camera Crane without Swivel Mount
    Kessler Pocket Jib Crane
    Green tick
    2 in stock
    £857.32
    £1,028.78 inc VAT
    Close
    Kessler Pocket Jib Crane
    Kessler CJ1014 (CJ-1014) Pocket Jib Camera Crane without Swivel Mount
    Green tick
    2 in stock
    £857.32
    £1,028.78 inc VAT
    The Kessler Pocket Jib™ is the ultimate compact, portable jib. Not only is this jib fully collapsible for easy transport, but you can also mount the Kessler Pocket Dolly™ or CineSlider™ to it, turning it into a virtual "all-in-one" production tool, offering both a jib and mini-dolly in one unit. The Pocket Jib™ has a telescopic dual rail arm design that...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler KC-Lite 8.0 Camera Crane (Crane Only)
    Kessler KC-Lite 8.0
    Green tick
    1 in stock
    £342.90
    £411.48 inc VAT
    Close
    Kessler KC-Lite 8.0
    Kessler KC-Lite 8.0 Camera Crane (Crane Only)
    Green tick
    1 in stock
    £342.90
    £411.48 inc VAT
    The Kessler KC-Lite 8.0 has been designed to be the best "economy" crane on the market. For the filmmaker shooting on a tight budget, using a lighter digital video or DSLR camera under 10 pounds, we feel the KC-Lite is the highest quality camera crane / jib in the sub $400 price range. Based off the design of our standard...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler MG1016 (MG-1016) Kessler Kwik Slider Plate (formerly Kwik Mini Utility Plate)
    Kessler Kwik Slider Plate
    Green tick
    1 in stock
    £42.83
    £51.40 inc VAT
    Close
    Kessler Kwik Slider Plate
    Kessler MG1016 (MG-1016) Kessler Kwik Slider Plate (formerly Kwik Mini Utility Plate)
    Green tick
    1 in stock
    £42.83
    £51.40 inc VAT
    Use this plate to attach a slider to a Kwik Release system or even mount accessories like monitors, microphones, lights, etc. via the many 1/4"-20 and 3/8"-16 thread holes.  ...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler CS1021 (CS-1021) 100mm High Hat including a 10mm knob for fluid heads with 3/8 threaded studs
    Kessler 100mm high hat
    Attention
    Estimated 4-6 weeks*
    £102.84
    £123.41 inc VAT
    Close
    Kessler 100mm high hat
    Kessler CS1021 (CS-1021) 100mm High Hat including a 10mm knob for fluid heads with 3/8 threaded studs
    Attention
    Estimated 4-6 weeks*
    £102.84
    £123.41 inc VAT
    Kessler 100mm High Hat (includes knob for fluid heads with 3/8" threaded stud) PLEASE NOTE: A METRIC 10mm Knob is required for certain fluid heads, such as Sachtler, Cartoni, etc.... See Accessories Tab.....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler K-Pod 6 inch All Terrain Wheels - set of 3
    Kessler K-Pod All Terrain wheels
    Attention
    Estimated 4-6 weeks*
    £102.84
    £123.41 inc VAT
    Close
    Kessler K-Pod All Terrain wheels
    Kessler K-Pod 6 inch All Terrain Wheels - set of 3
    Attention
    Estimated 4-6 weeks*
    £102.84
    £123.41 inc VAT
    6" dual-locking nomadic "All- Terrain" wheels for the K-Pod System™. These wheels are for use on rough terrain, like gravel or in a yard. Use the Standard Caster Wheels for smooth surfaces, like in the studio. Set of 3....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler MG1002 (MG-1002) Kwik Mini Plate
    Kessler Kwik Mini Plate MG1002
    Attention
    Estimated 4-6 weeks*
    £25.68
    £30.82 inc VAT
    Close
    Kessler Kwik Mini Plate MG1002
    Kessler MG1002 (MG-1002) Kwik Mini Plate
    Attention
    Estimated 4-6 weeks*
    £25.68
    £30.82 inc VAT
    The Mini Plate is an ideal mounting option for both DSLR cameras and the Kessler Pocket Jib Traveler, due to their small footprints. Small enough to avoid sticking out when packed, the Mini Plate is used in conjunction with the Kessler Kwik Release system for quick and easy mounting. Kessler stand behind there products 100%.The Kessler Lifetime Warranty backs the Kwik...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler TH1006 (TH-1006) K-Pod 6 inch Standard Wheels for the K-Pod Tripod
    Kessler K-Pod standard Wheels
    Attention
    Estimated 4-6 weeks*
    £77.12
    £92.54 inc VAT
    Close
    Kessler K-Pod standard Wheels
    Kessler TH1006 (TH-1006) K-Pod 6 inch Standard Wheels for the K-Pod Tripod
    Attention
    Estimated 4-6 weeks*
    £77.12
    £92.54 inc VAT
    Standard 6" (inch) dual-locking caster wheels for the K-Pod tripod System. Set of 3....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler MG1022 (MG-1022) HD Angle Plate Designed to Fill Gaps for Heavy Duty Leveling of up to 50lbs
    Kessler HD Angle Plate
    Attention
    Estimated 4-6 weeks*
    £342.90
    £411.48 inc VAT
    Close
    Kessler HD Angle Plate
    Kessler MG1022 (MG-1022) HD Angle Plate Designed to Fill Gaps for Heavy Duty Leveling of up to 50lbs
    Attention
    Estimated 4-6 weeks*
    £342.90
    £411.48 inc VAT
    The HD Angle Plate is the newest addition to Kessler’s mounting & grip accessories. It fills a gap for heavy duty leveling of up to 50 lbs., ideal for use with Kessler motion control heads.  Easily tilt the the HD Angle Plate’s platform from 0-95 degrees by utilizing the locking levers to securely mount the platform into position. For minor angles,...
    Full Details
    Add to Basket
    Quick Info
    Select Option
    Kessler CS1030 (CS-1030) Shuttle Pod Mini Cart - No Mount
    Kessler Shuttle Pod Mini
    Attention
    Estimated 4-6 weeks*
    £314.21
    £377.05 inc VAT
    Close
    Kessler Shuttle Pod Mini
    Kessler CS1030 (CS-1030) Shuttle Pod Mini Cart - No Mount
    Attention
    Estimated 4-6 weeks*
    from: £314.21
    £377.05 inc VAT
    The Kessler Shuttle Pod Mini is a smaller, easier to transport version of the original Shuttle Pod. It is about half the size and half the weight of its big brother, yet still provides the versatility needed to get the manual or motorized shot you require. The Shuttle Pod Mini is designed to break down into a small, easy to manage...
    Full Details
    Select Option
    Quick Info
    Add to Basket
    Kessler K-Pod Adjustable Seat/Low Boy Mount For K-Pod Tripod
    Kessler K-Pod Ajustable Seat/Low Boy
    Attention
    Estimated 4-6 weeks*
    £111.41
    £133.69 inc VAT
    Close
    Kessler K-Pod Ajustable Seat/Low Boy
    Kessler K-Pod Adjustable Seat/Low Boy Mount For K-Pod Tripod
    Attention
    Estimated 4-6 weeks*
    £111.41
    £133.69 inc VAT
    The K-Pod™ Adjustable Seat is really two accessories in one! First, it is an adjustable custom made seat. This is great when using the K-Pod as a dolly on our K-Flex Track. The mounting bracket can be adjusted up and down the K-Pod leg for desired height. Secondly, the seat can be removed from the bracket and our Ball Relocater (optional accessory)...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler TH1005 (TH-1005) K-Pod Spiked Feet for the K-Pod Tripod
    Kessler K-Pod Spiked Feet
    Attention
    Estimated 4-6 weeks*
    £21.39
    £25.67 inc VAT
    Close
    Kessler K-Pod Spiked Feet
    Kessler TH1005 (TH-1005) K-Pod Spiked Feet for the K-Pod Tripod
    Attention
    Estimated 4-6 weeks*
    £21.39
    £25.67 inc VAT
    100% stainless steel spiked feet for the Kessler K-Pod Tripod System. Set of 3....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler K-Pod Premium Track Dolly Trucks
    Kessler K-Pod Premium Track Dolly Trucks
    Attention
    Estimated 4-6 weeks*
    £342.90
    £411.48 inc VAT
    Close
    Kessler K-Pod Premium Track Dolly Trucks
    Kessler K-Pod Premium Track Dolly Trucks
    Attention
    Estimated 4-6 weeks*
    £342.90
    £411.48 inc VAT
    Upgrade your K-Pod Track Dolly Truck wheels to our new Premium Wheels. These wheels are Grade A precision machine cast 95A polyurethane, that are extremely smooth and will stay true, and not develop the dreaded "flat spot" over time, that is common with most injection molded dolly wheels. Our standard dolly truck wheels work very well, but if you want...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler K-Pod Push-Pull Handle (Handle Only)
    Kessler K-Pod Push-Pull Handle (Handle Only)
    Attention
    Estimated 4-6 weeks*
    £111.41
    £133.69 inc VAT
    Close
    Kessler K-Pod Push-Pull Handle (Handle Only)
    Kessler K-Pod Push-Pull Handle (Handle Only)
    Attention
    Estimated 4-6 weeks*
    £111.41
    £133.69 inc VAT
    Designed as a unique Push/Pull Handle for the K-Pod System.The Push/Pull Handle securely mounts to the leg of the K-Pod Tripod to allow you to push or pull a camera operator, when using the K-Pod as a dolly. This is the Handle Only. Track,Tripod and Camera Not Included. ...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler K-Pod 7 inch Idler Arm Upgrade
    Kessler K-Pod 7 inch Idler Arm Upgrade
    Attention
    Estimated 4-6 weeks*
    £85.69
    £102.83 inc VAT
    Close
    Kessler K-Pod 7 inch Idler Arm Upgrade
    Kessler K-Pod 7 inch Idler Arm Upgrade
    Attention
    Estimated 4-6 weeks*
    £85.69
    £102.83 inc VAT
    Our new 7" Idler Arm Upgrade for our K-Pod™ Track Dolly Trucks allow for improved operation when using the trucks on track that is not perfectly straight or parallel. If there is a slight variance in your track, the Idler Arm allows the trucks to adjust or float in and out to the variance to keep from derailing. Our standard...
    Full Details
    Add to Basket
    Quick Info
    Select Option
    Kessler Shuttle Pod (choice of camera mount insert options)
    Kessler Shuttle Pod
    Attention
    Estimated 4-6 weeks*
    £499.93
    £599.92 inc VAT
    Close
    Kessler Shuttle Pod
    Kessler Shuttle Pod (choice of camera mount insert options)
    Attention
    Estimated 4-6 weeks*
    from: £499.93
    £599.92 inc VAT
    The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly. You can also use our proprietary expandable rail system (available soon) if you do not have a Kessler Crane. The Shuttle Pod™ has multiple optional camera mounting options available, using the...
    Full Details
    Select Option
    Quick Info
    Add to Basket
    Kessler Optional M10 Knob for fluid heads with metric threaded stems or studs (CS1063)
    Kessler Crane M10 knob
    Attention
    Estimated 4-6 weeks*
    £11.10
    £13.32 inc VAT
    Close
    Kessler Crane M10 knob
    Kessler Optional M10 Knob for fluid heads with metric threaded stems or studs (CS1063)
    Attention
    Estimated 4-6 weeks*
    £11.10
    £13.32 inc VAT
    This Kessler M10 Knob is made for fluid tripod heads with metric threaded stems or studs.    ...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Vocas Shoulder Mountable Baseplate with 15mm Rods for the Sony PXW-FS7 Camera - 0350-1600 (03501600)
    Vocas Baseplate PXW-FS7
    Green tick
    7 in stock
    £475.00
    £570.00 inc VAT
    Close
    Vocas Baseplate PXW-FS7
    Vocas Shoulder Mountable Baseplate with 15mm Rods for the Sony PXW-FS7 Camera - 0350-1600 (03501600)
    Green tick
    7 in stock
    £475.00
    £570.00 inc VAT
    The Vocas 0350-1600 transforms the camera into a true shoulder camera and makes the camera compatible with many other support systems. It features an adjustable rubber shoulder pad, fixed rosette attachments and 15mm rails in the front and back. The weight of this support (without rails) is 600 grams. ...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Vocas USBP-15 MKII Baseplate 0350-2200 (03502200)
    Vocas USBP-15 MKII
    Green tick
    7 in stock
    £520.83
    £625.00 inc VAT
    Close
    Vocas USBP-15 MKII
    Vocas USBP-15 MKII Baseplate 0350-2200 (03502200)
    Green tick
    7 in stock
    £520.83
    £625.00 inc VAT
    This new base plate features everything you need to convert your camera into a shoulder camera, and is compatible with a lot of camera such as the Sony PXW-FS5, Arri Alexa Mini, Canon EOS C100/C300/C500 and the Panasonic Varicam HS/S35. Compatible Cameras: ARRI Alexa Mini ARRI Amira Blackmagic Design Cinema Camera Blackmagic Design Production Camera 4K Canon EOS 1D MK IV Canon EOS 1D X Canon EOS C100 Canon...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Vocas Base plate MKII for Sony PXW-FS7 / FS7 II -  0350-1700 (03501700)
    Vocas Base plate MKII - Sony FS7
    Green tick
    2 in stock
    £525.00
    £630.00 inc VAT
    Close
    Vocas Base plate MKII - Sony FS7
    Vocas Base plate MKII for Sony PXW-FS7 / FS7 II - 0350-1700 (03501700)
    Green tick
    2 in stock
    £525.00
    £630.00 inc VAT
    Transforms the camera into a true shoulder camera and make the camera compatible with many other support systems. The base plate MKII can be mounted to the camera after removing the original Sony shoulder pad. It features an adjustable rubber shoulder pad, fixed rosette attachment, VCT-14 adjustment and 15 mm rails in the front and back. Note: When using the Vocas...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Movcam 303-2203 (3032203) LWS Baseplate for Movcam Cage to fit Sony a7s Plus a7s and a7r MkII Models
    Movcam a7s LWS Baseplate
    Green tick
    95 in stock
    £82.00
    £98.40 inc VAT
    Close
    Movcam a7s LWS Baseplate
    Movcam 303-2203 (3032203) LWS Baseplate for Movcam Cage to fit Sony a7s Plus a7s and a7r MkII Models
    Green tick
    95 in stock
    £82.00
    £98.40 inc VAT
    PLEASE NOTE: Appearance such as colour may vary from that shown. LWS Baseplate for the Movcam cage designed for the Sony a7s (303-2201) or a7s / a7r mkII versions (303-2401). Can be used with the 303-2202 or 303-2402 Riser Block. Accepts 15mm rods. All three components are also available as a kit, Movcam ref 303-2200 or 303-2400....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Sachtler Height-Adjustable Ace BasePlate for Small Camcorders and DSLRs (for 15mm Rods) (p/n S2154-0001)
    Sachtler Ace Baseplate
    Green tick
    12 in stock
    £189.00
    £226.80 inc VAT
    Close
    Sachtler Ace Baseplate
    Sachtler Height-Adjustable Ace BasePlate for Small Camcorders and DSLRs (for 15mm Rods) (p/n S2154-0001)
    Green tick
    12 in stock
    £189.00
    £226.80 inc VAT
    The height-adjustable Ace Base Plate is the ideal platform for 15-mm rods. It can be attached to the camera directly. If needed you can add the anti-twist stop to prevent the camera from turning, especially for some DSLR cameras. The Ace Base Plate can be easily taken down to go on shooting with your Shoulder Rig. With a payload up...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Chrosziel 401-FS7 (401FS7) Light Weight Support for Sony PXW-FS7 w/ Integrated Shoulder Pad, 2 Rosettes, 2 Rods Ø 15mm, length 205mm
    Chrosziel 401-FS7 Support PXW-FS7
    Green tick
    2 in stock
    £528.32
    £633.98 inc VAT
    Close
    Chrosziel 401-FS7 Support PXW-FS7
    Chrosziel 401-FS7 (401FS7) Light Weight Support for Sony PXW-FS7 w/ Integrated Shoulder Pad, 2 Rosettes, 2 Rods Ø 15mm, length 205mm
    Green tick
    2 in stock
    £528.32
    £633.98 inc VAT
    With the new Light Weight Support 401-FS7 for Sony PXW-FS7, Chrosziel developed a support with integrated shoulder pad and unparalleled slim design. The ergonomic pad is slideable and allows easy and safe rest of the LWS on the shoulder. Its integrated V-mount reliably fixes the camera on a quick-lock plate....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Vocas MBS-100 (MBS100) 15mm Mattebox Support Type-M for the Canon C300 - 0350-0016 (03500016)
    MBS-100 Support for C300
    Green tick
    3 in stock
    £204.17
    £245.00 inc VAT
    Close
    MBS-100 Support for C300
    Vocas MBS-100 (MBS100) 15mm Mattebox Support Type-M for the Canon C300 - 0350-0016 (03500016)
    Green tick
    3 in stock
    £204.17
    £245.00 inc VAT
    This 15mm Lightweight rail support has been developed to be compatible with the Canon EOS C300 camera.It provides excellent protection for the camera and lens, and is compatible with many 15mm accassories such as lens supports or follow focus. This rail support comes standard with a set of 15mm rails of 400mm in length. Also directly compatible with the ARRI BP-8 19mm...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler MG1001 (MG-1001) Kwik Release Plate
    Kessler Kwik Release Plate
    Green tick
    10 in stock
    £119.99
    £143.99 inc VAT
    Close
    Kessler Kwik Release Plate
    Kessler MG1001 (MG-1001) Kwik Release Plate
    Green tick
    10 in stock
    £119.99
    £143.99 inc VAT
    The Kwik Release System is a unique, patent pending mounting system featuring solid billet aluminum and stainless steel construction. With a one hand drop-in instant latching and push button drop-gate release, this mounting system is strong, secure, fast and easy to use. Once the mounting plate is snapped into the receiver, the plate can be adjusted but it cannot slide out...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler K-Pod Heavy Duty Tripod (500lb Load Capacity)
    Kessler K-Pod Tripod System
    Green tick
    2 in stock
    £514.37
    £617.24 inc VAT
    Close
    Kessler K-Pod Tripod System
    Kessler K-Pod Heavy Duty Tripod (500lb Load Capacity)
    Green tick
    2 in stock
    £514.37
    £617.24 inc VAT
    The Kessler K-Pod System™ is a revolutionary tripod camera system designed to support camera cranes / jibs. The K-Pod™ has extremely rigid double strut legs with the patent pending incremental Posi-Lock System™, that friction locks the legs, as well as interlocks into incremental lock pockets. The lock pockets allow you to equally position the legs while providing a lock that can...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler TH1001 (TH-1001) Hercules 2.0 Tripod Head
    Kessler Hercules 2.0 Head
    Attention
    Estimated 4-6 weeks*
    £385.77
    £462.92 inc VAT
    Close
    Kessler Hercules 2.0 Head
    Kessler TH1001 (TH-1001) Hercules 2.0 Tripod Head
    Attention
    Estimated 4-6 weeks*
    £385.77
    £462.92 inc VAT
    The Kessler "Hercules 2.0" Head is the new and improved version of our ultra strong, solid aluminum pan / tilt head. Originally designed specifically for use with our Kessler Crane®, the “Hercules 2.0” now has panning drag control and with an optional quick plate* is an excellent head to mount your camera to, when not using your crane. Mounts to...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler CS1002 (CS-1002) CineSlider (3ft Length) with Removable Crank Handle
    Kessler CineSlider 3ft
    Attention
    Estimated 4-6 weeks*
    £1,028.79
    £1,234.55 inc VAT
    Close
    Kessler CineSlider 3ft
    Kessler CS1002 (CS-1002) CineSlider (3ft Length) with Removable Crank Handle
    Attention
    Estimated 4-6 weeks*
    £1,028.79
    £1,234.55 inc VAT
    The Kessler CineSlider™ is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds. Weighing in at only 10 pounds, with a length of 40.5 inches, 5 inches wide, and a total camera travel distance or 35.5 inches, the CineSlider is a very portable solution to get those quick, smooth short-run dolly movements,...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler CS1014 (CS-1014) Stealth Slider (Standard) (Length 40.5 inches)
    Kessler Stealth Standard
    Green tick
    1 in stock
    £685.85
    £823.02 inc VAT
    Close
    Kessler Stealth Standard
    Kessler CS1014 (CS-1014) Stealth Slider (Standard) (Length 40.5 inches)
    Green tick
    1 in stock
    £685.85
    £823.02 inc VAT
    The Stealth is a hybrid camera slider that combines the lightweight portable rail & carriage system of our standard Pocket Dolly™ with the drag control of our CineSlider™. Features include drag control, measuring tape, smooth rolling precision stainless steel ball bearing wheels and multiple mounting options.  The Stealth is smoother than other linear sliders due to our ball bearing wheel design....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler CineSlider (5ft Length) with Removable Crank Handle
    Kessler CineSlider 5ft No QR
    Green tick
    In stock
    £1,371.74
    £1,646.09 inc VAT
    Close
    Kessler CineSlider 5ft No QR
    Kessler CineSlider (5ft Length) with Removable Crank Handle
    Green tick
    In stock
    £1,371.74
    £1,646.09 inc VAT
    Kessler CineSlider 5ft The Kessler CineSlider™ is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds. Weighing in at only 12 pounds, with a length of 60.5 inches, 5 inches wide, and a total camera travel distance or 51 inches, the CineSlider is a very portable solution to get those quick, smooth short-run...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler CS1047 (CS-1047) CineSlider (3ft Length) - without Crank Handle
    Kessler CineSlider 3ft
    Green tick
    1 in stock
    £985.92
    £1,183.10 inc VAT
    Close
    Kessler CineSlider 3ft
    Kessler CS1047 (CS-1047) CineSlider (3ft Length) - without Crank Handle
    Green tick
    1 in stock
    £985.92
    £1,183.10 inc VAT
    Kessler CineSlider 3ft The Kessler 3ft CineSlider™ is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds. Weighing in at only 9.1 pounds, with a length of 40.5 inches, 5 inches wide, and a total camera travel distance of 35.5 inches, the 3ft CineSlider is a very portable solution to get those quick,...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler CS1016 (CS-1016) Stealth Mini 22.5 inch - hybrid camera slider
    Kessler Stealth Mini 22.5 inch
    Attention
    Estimated 4-6 weeks*
    £685.85
    £823.02 inc VAT
    Close
    Kessler Stealth Mini 22.5 inch
    Kessler CS1016 (CS-1016) Stealth Mini 22.5 inch - hybrid camera slider
    Attention
    Estimated 4-6 weeks*
    £685.85
    £823.02 inc VAT
    The Stealth is a hybrid camera slider that combines the lightweight portable rail & carriage system of our standard Pocket Dolly™ with the drag control of our CineSlider™. Features include drag control, measuring tape, smooth rolling precision stainless steel ball bearing wheels and multiple mounting options.  The Stealth is smoother than other linear sliders due to our ball bearing wheel design....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler (CS1048) CineSlider (5ft Length - No Crank Handle)
    Kessler CineSlider 5ft
    Attention
    Estimated 4-6 weeks*
    £1,328.87
    £1,594.64 inc VAT
    Close
    Kessler CineSlider 5ft
    Kessler (CS1048) CineSlider (5ft Length - No Crank Handle)
    Attention
    Estimated 4-6 weeks*
    £1,328.87
    £1,594.64 inc VAT
    Kessler CineSlider 5ft The Kessler CineSlider™ is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds. Weighing in at only 12 pounds, with a length of 60.5 inches, 5 inches wide, and a total camera travel distance or 51 inches, the CineSlider is a very portable solution to get those quick, smooth short-run...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler SS2002 (SS-2002) Second Shooter 2-Axis Bundle including Pan/Tilt Head and Controller Only, NO Camera Control Cable
    Kessler 2-Axis Bundle
    Attention
    Estimated 4-6 weeks*
    £925.91
    £1,111.09 inc VAT
    Close
    Kessler 2-Axis Bundle
    Kessler SS2002 (SS-2002) Second Shooter 2-Axis Bundle including Pan/Tilt Head and Controller Only, NO Camera Control Cable
    Attention
    Estimated 4-6 weeks*
    £925.91
    £1,111.09 inc VAT
    The Second Shooter™ is a revolutionary motion control system that boasts a sleek and compact design, feature-rich operation and an incredibly intuitive user interface. Featuring 100% repeatable motion control for live-mode, looping, time-lapse and stop-motion applications.  Unlike stepper motor based moco systems on the market today, Second Shooter™ receives feedback communication from digital-encoded motors in determining motor positions to ensure precise control....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler CS1001 (CS-1001) CineSlider Traveler with Removable Crank Handle
    Kessler CineSlider Traveler
    Attention
    Estimated 4-6 weeks*
    £943.06
    £1,131.67 inc VAT
    Close
    Kessler CineSlider Traveler
    Kessler CS1001 (CS-1001) CineSlider Traveler with Removable Crank Handle
    Attention
    Estimated 4-6 weeks*
    £943.06
    £1,131.67 inc VAT
    Kessler CineSlider Traveler The Kessler Traveler CineSlider™ is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds. Weighing in at only 7.7 pounds, with a length of 28.5 inches, 5 inches wide, and a total camera travel distance of 19 inches, the CineSlider traveler is a very portable solution to get those quick,...
    Full Details
    Add to Basket

    Explore More

    Questions and Answers about the Kessler Kwik LONG Plate

    Name:
    Email:
    Question:
    Ask us a question
    Please enter your question into the field
    Submit Question

    What our customers say about CVP

    Read all the latest reviews on Trustpilot about CVP

    What other customers have looked at

    Quick Info
    Add to Basket
    Kessler MG1001 (MG-1001) Kwik Release Plate
    Kessler Kwik Release Plate
    Green tick
    10 in stock
    £119.99
    £143.99 inc VAT
    Close
    Kessler Kwik Release Plate
    Kessler MG1001 (MG-1001) Kwik Release Plate
    Green tick
    10 in stock
    £119.99
    £143.99 inc VAT
    The Kwik Release System is a unique, patent pending mounting system featuring solid billet aluminum and stainless steel construction. With a one hand drop-in instant latching and push button drop-gate release, this mounting system is strong, secure, fast and easy to use. Once the mounting plate is snapped into the receiver, the plate can be adjusted but it cannot slide out...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler MG1005 (MG-1005) Kwik Utility Plate
    Kessler Kwik Utility Plate
    Attention
    Estimated 4-6 weeks*
    £51.40
    £61.68 inc VAT
    Close
    Kessler Kwik Utility Plate
    Kessler MG1005 (MG-1005) Kwik Utility Plate
    Attention
    Estimated 4-6 weeks*
    £51.40
    £61.68 inc VAT
    Use this plate with the Kessler Kwik Release System (See Accessories) for mounting Kessler sliders, the REVOLUTION Head, High Hats or even mount accessories like monitors, microphones, lights, etc. via the many 1/4"-20 and 3/8"-16 thread holes....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler MG1018 (MG-1018) KWIK Long Camera Plate (3/8-16)
    Kessler Long Plate 3-8 16
    Attention
    Estimated 4-6 weeks*
    £38.54
    £46.25 inc VAT
    Close
    Kessler Long Plate 3-8 16
    Kessler MG1018 (MG-1018) KWIK Long Camera Plate (3/8-16)
    Attention
    Estimated 4-6 weeks*
    £38.54
    £46.25 inc VAT
    Use this KWIK plate with the Kessler Kwik Release System for larger cameras or when greater adjustability is needed....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Sachtler 0164 Side Load camera mount plate for fluid heads FSB 4, FSB 6, FSB 8, Cine DSLR and ACE L
    Sachtler 0164 Camera Plate
    Attention
    Estimated < 7 working days*
    £44.00
    £52.80 inc VAT
    Close
    Sachtler 0164 Camera Plate
    Sachtler 0164 Side Load camera mount plate for fluid heads FSB 4, FSB 6, FSB 8, Cine DSLR and ACE L
    Attention
    Estimated < 7 working days*
    £44.00
    £52.80 inc VAT
    Sideload plate adapter for the DV 1, FSB 2, FSB 4, Cine DSLR, FSB 6 and FSB 8, Artemis DV Pro FX, MD systems and the the ACE L....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler MG1017 (MG-1017) KWIK Short Camera Plate (3/8-16)
    Kessler short Plate 3/8-16
    Green tick
    5 in stock
    £29.96
    £35.95 inc VAT
    Close
    Kessler short Plate 3/8-16
    Kessler MG1017 (MG-1017) KWIK Short Camera Plate (3/8-16)
    Green tick
    5 in stock
    £29.96
    £35.95 inc VAT
    Use this KWIK short plate with the Kessler Kwik Release System for cameras or even mount accessories like monitors, microphones, lights, etc. via the many 1/4"-20 and 3/8"-16 thread holes. Kessler stand behind there products 100% and offer a Lifetime Warranty on the Kwik Release system's....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler MG1016 (MG-1016) Kessler Kwik Slider Plate (formerly Kwik Mini Utility Plate)
    Kessler Kwik Slider Plate
    Green tick
    1 in stock
    £42.83
    £51.40 inc VAT
    Close
    Kessler Kwik Slider Plate
    Kessler MG1016 (MG-1016) Kessler Kwik Slider Plate (formerly Kwik Mini Utility Plate)
    Green tick
    1 in stock
    £42.83
    £51.40 inc VAT
    Use this plate to attach a slider to a Kwik Release system or even mount accessories like monitors, microphones, lights, etc. via the many 1/4"-20 and 3/8"-16 thread holes.  ...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler K-Pod Heavy Duty Tripod (500lb Load Capacity)
    Kessler K-Pod Tripod System
    Green tick
    2 in stock
    £514.37
    £617.24 inc VAT
    Close
    Kessler K-Pod Tripod System
    Kessler K-Pod Heavy Duty Tripod (500lb Load Capacity)
    Green tick
    2 in stock
    £514.37
    £617.24 inc VAT
    The Kessler K-Pod System™ is a revolutionary tripod camera system designed to support camera cranes / jibs. The K-Pod™ has extremely rigid double strut legs with the patent pending incremental Posi-Lock System™, that friction locks the legs, as well as interlocks into incremental lock pockets. The lock pockets allow you to equally position the legs while providing a lock that can...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Joby (JB01348-PWW) UltraPlate 208 - Extended Arca-Swiss compatible Quick Release Plate
    Joby UltraPlate 208
    Attention
    Estimated 2-4 weeks*
    £21.66
    £25.99 inc VAT
    Close
    Joby UltraPlate 208
    Joby (JB01348-PWW) UltraPlate 208 - Extended Arca-Swiss compatible Quick Release Plate
    Attention
    Estimated 2-4 weeks*
    £21.66
    £25.99 inc VAT
    Use the Ultra Plate 208 as a quick release plate to your tripod via the Arca-Swiss compatible dovetail (or attach your quick release plate) and attach your favorite tripod screw accessory.  You can have the best of both worlds. ...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler TH1006 (TH-1006) K-Pod 6 inch Standard Wheels for the K-Pod Tripod
    Kessler K-Pod standard Wheels
    Attention
    Estimated 4-6 weeks*
    £77.12
    £92.54 inc VAT
    Close
    Kessler K-Pod standard Wheels
    Kessler TH1006 (TH-1006) K-Pod 6 inch Standard Wheels for the K-Pod Tripod
    Attention
    Estimated 4-6 weeks*
    £77.12
    £92.54 inc VAT
    Standard 6" (inch) dual-locking caster wheels for the K-Pod tripod System. Set of 3....
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    TRIAD VPA-14 (TRIADVPA14) V-mount camera plate with quick-release mechanism (p/n 2750.0009)
    VPA-14 V-mount camera plate
    Green tick
    2 in stock
    £185.00
    £222.00 inc VAT
    Close
    VPA-14 V-mount camera plate
    TRIAD VPA-14 (TRIADVPA14) V-mount camera plate with quick-release mechanism (p/n 2750.0009)
    Green tick
    2 in stock
    £185.00
    £222.00 inc VAT
    With the TRIAD VPA-14 V-mount camera plate you can attach your camera to a tripod by means of a tripod quick-release mounting plate, such as the Alphatron VTA-14. It is also compatible with many other tripod plates with a quick release system such as the Sony VCT-14, Panasonic SHAN-TM700 and JVC KA-551. You can fit your camcorder in a number of different...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler TH1018 (TH-1018) K-Pod Tripod Soft Case
    Kessler K-Pod Soft Case
    Green tick
    1 in stock
    £111.41
    £133.69 inc VAT
    Close
    Kessler K-Pod Soft Case
    Kessler TH1018 (TH-1018) K-Pod Tripod Soft Case
    Green tick
    1 in stock
    £111.41
    £133.69 inc VAT
    Make your transportation easier with the Kessler K-Pod™ Soft Case! This case is custom made for the Kessler K-Pod™. The case has a rigid Masonite padded floor and the foam lined top and sides keep their soft shape and ensure the protection of your equipment. We have included a utility pouch with a velcro flap on the front. Use this...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler MG1002 (MG-1002) Kwik Mini Plate
    Kessler Kwik Mini Plate MG1002
    Attention
    Estimated 4-6 weeks*
    £25.68
    £30.82 inc VAT
    Close
    Kessler Kwik Mini Plate MG1002
    Kessler MG1002 (MG-1002) Kwik Mini Plate
    Attention
    Estimated 4-6 weeks*
    £25.68
    £30.82 inc VAT
    The Mini Plate is an ideal mounting option for both DSLR cameras and the Kessler Pocket Jib Traveler, due to their small footprints. Small enough to avoid sticking out when packed, the Mini Plate is used in conjunction with the Kessler Kwik Release system for quick and easy mounting. Kessler stand behind there products 100%.The Kessler Lifetime Warranty backs the Kwik...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Kessler Second Shooter 3 Axis Camera Motion Control System for DSLRs and Video Cameras up to 6.8kg in Weight
    Kessler Second Shooter
    Attention
    Estimated 4-6 weeks*
    £1,183.16
    £1,419.79 inc VAT
    Close
    Kessler Second Shooter
    Kessler Second Shooter 3 Axis Camera Motion Control System for DSLRs and Video Cameras up to 6.8kg in Weight
    Attention
    Estimated 4-6 weeks*
    £1,183.16
    £1,419.79 inc VAT
    The Second Shooter is a revolutionary motion control system that boasts a sleek and compact design, feature-rich operation and an incredibly intuitive user interface. Featuring 100% repeatable motion control for live-mode, looping, time-lapse and stop-motion applications.  Unlike stepper motor based moco systems on the market today, Second Shooter receives feedback communication from digital-encoded motors in determining motor positions to ensure precise...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Manfrotto MN-577 (MN577, 577) Quick Release Camera / Tripod Plate Assembly
    Manfrotto MN-577 Quick Release Plate
    Green tick
    10 in stock
    £45.00
    £54.00 inc VAT
    Close
    Manfrotto MN-577 Quick Release Plate
    Manfrotto MN-577 (MN577, 577) Quick Release Camera / Tripod Plate Assembly
    Green tick
    10 in stock
    £45.00
    £54.00 inc VAT
    Please Note: Not compatible with Pro-5 HDV or Pro-6 HDV Manfrotto MN577 Video quick release tripod plate and adapter assembly. Compatible with the original plate supplied with Vinten Pro-5 and manfrotto 525 fluid heads, this plate is ideal for mounting on auxilliary equipment such as camera stabilisers etc... to allow rapid inter-change of cameras. Compatible with the 501PL camera plate (supplied with the head 501HDV,...
    Full Details
    Add to Basket
    Quick Info
    Add to Basket
    Manfrotto MSQ6 (MSQ-6) Q6 Top Lock Quick Release Adaptor, Complete with Plate
    Manfrotto MSQ6 QR Plate
    Attention
    Estimated < 2 weeks*
    £65.83
    £79.00 inc VAT
    Close
    Manfrotto MSQ6 QR Plate
    Manfrotto MSQ6 (MSQ-6) Q6 Top Lock Quick Release Adaptor, Complete with Plate
    Attention
    Estimated < 2 weeks*
    £65.83
    £79.00 inc VAT
    This adaptor allows you to fit the Manfrotto Q6 Top Lock quick release system to an existing photo head.The Top Lock system has been developed to offer photographers a fast, easy to use and very secure camera quick release mechanism suitable for heavy pro equipment. The camera plate clicks into the clamp from above, and as soon as it engages,...
    Full Details
    Add to Basket

    Our promise to you

    Website security and privacy policy

    We take your security and privacy very seriously. This document details the information about you that we collect, how we use it and the steps we take to ensure that it is kept secure. If you have any questions about this privacy policy or the security of this website please contact us.
    By using this web site you consent to us collecting and using personal information about you as specified in this policy. We may update this Privacy Policy from time to time, so please check back here regularly.

    Fast worldwide shipping

    Wherever you’re located you can rely on us to provide rapid delivery through our carefully selected global network of carriers.
    Our logistics department work closely with our sales support team in order to determine the most cost-effective carriage method available that can meet your preferred delivery timescale. We will arrange full insurance cover against loss or damage during international transit and customers with their own cargo insurance can elect to self-insure.
    All consignments are carefully and robustly packed in order to minimise any risk of damage during transit and large shipments are often palletised and film-wrapped.
    VAT is not charged to EU business customers who provide a valid VAT registration number. VAT numbers are validated through the VIES VAT number validation portal.

    Shopping Basket 0 Item(s):
    £0.00
    Estimated Shipping:
    Shipping Details
    Available Shipping Price
    --
    :
    £0.00
    Copyright © 1986-2017 | CVP Group | CVP Blog E&OE 22 May 2017 20:34 BST

    Subject to status. Terms and Conditions apply. Creative Video Productions Ltd acts as a broker and offers finance from a restricted range of finance providers.
    Finance provided by PayPal Credit, a trading name of PayPal (Europe) S.à r.l. et Cie, S.C.A., 22-24 Boulevard Royal L-2449, Luxembourg