This website uses cookies. By continuing to browse the site you are agreeing to our use of cookies.

Matthews Products in Lighting

Light Modifiers

Quick Info
Add to Basket
Matthews (329040-1) Sound Blanket with Grommets - 145x245cm
Matthews Sound Blanket with Grommets
Attention
Estimated 2-3 working days*
£54.90
£65.88 inc VAT
Close
Matthews Sound Blanket with Grommets
Matthews (329040-1) Sound Blanket with Grommets - 145x245cm
Attention
Estimated 2-3 working days*
£54.90
£65.88 inc VAT
Sound Blankets with Grommets can be used to blackout a window or hang in a room when added sound insulation is needed. Sound Blankets can also be used to protect equipment during transportation....
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (169001) 30inch x 36inch Flag
Matthews 30inch x 36inch Flag
Attention
Estimated 2-3 working days*
£54.00
£64.80 inc VAT
Close
Matthews 30inch x 36inch Flag
Matthews (169001) 30inch x 36inch Flag
Attention
Estimated 2-3 working days*
£54.00
£64.80 inc VAT
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (169028T) 48inch x 48inch Floppy Flag - Top Hinge
Matthews 48x48in Floppy Flag
Attention
Estimated 2-4 weeks*
£139.50
£167.40 inc VAT
Close
Matthews 48x48in Floppy Flag
Matthews (169028T) 48inch x 48inch Floppy Flag - Top Hinge
Attention
Estimated 2-4 weeks*
£139.50
£167.40 inc VAT
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149545) 18in x 24in Artificial Silk Open End Scrims in White
Matthews 18x24in Artificial Silk
Attention
Estimated 2-3 working days*
£35.10
£42.12 inc VAT
Close
Matthews 18x24in Artificial Silk
Matthews (149545) 18in x 24in Artificial Silk Open End Scrims in White
Attention
Estimated 2-3 working days*
£35.10
£42.12 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149066) 18in x 24in Single Open End Scrim in Black
Matthews 18x24in Black Single Scrim
Attention
Estimated 2-3 working days*
£41.40
£49.68 inc VAT
Close
Matthews 18x24in Black Single Scrim
Matthews (149066) 18in x 24in Single Open End Scrim in Black
Attention
Estimated 2-3 working days*
£41.40
£49.68 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 24inch x 36inch Flag (p/n 169062)
Matthews 24inch x 36inch Flag
Green tick
2 in stock
£42.30
£50.76 inc VAT
Close
Matthews 24inch x 36inch Flag
Matthews 24inch x 36inch Flag (p/n 169062)
Green tick
2 in stock
£42.30
£50.76 inc VAT
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (169010) 24inch x 30inch Flag
Matthews 24inch x 30inch Flag
Attention
Estimated 2-3 working days*
£49.50
£59.40 inc VAT
Close
Matthews 24inch x 30inch Flag
Matthews (169010) 24inch x 30inch Flag
Attention
Estimated 2-3 working days*
£49.50
£59.40 inc VAT
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (169003) 10inch x 42inch Cutter
Matthews 10in x 42in Cutter
Attention
Estimated 2-3 working days*
£55.80
£66.96 inc VAT
Close
Matthews 10in x 42in Cutter
Matthews (169003) 10inch x 42inch Cutter
Attention
Estimated 2-3 working days*
£55.80
£66.96 inc VAT
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149022) 30in x 36in Artificial Silk Open End Scrim in White
Matthews 30x36in Artificial Silk
Attention
Estimated 2-3 working days*
£57.60
£69.12 inc VAT
Close
Matthews 30x36in Artificial Silk
Matthews (149022) 30in x 36in Artificial Silk Open End Scrim in White
Attention
Estimated 2-3 working days*
£57.60
£69.12 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (169004) 18inch x 48inch Cutter
Matthews 18in x 48in Cutter
Attention
Estimated 2-3 working days*
£61.20
£73.44 inc VAT
Close
Matthews 18in x 48in Cutter
Matthews (169004) 18inch x 48inch Cutter
Attention
Estimated 2-3 working days*
£61.20
£73.44 inc VAT
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149106) 24in x 30in Double Open End Scrim in Black
Matthews 24x30in Black Double Scrim
Attention
Estimated 2-3 working days*
£65.70
£78.84 inc VAT
Close
Matthews 24x30in Black Double Scrim
Matthews (149106) 24in x 30in Double Open End Scrim in Black
Attention
Estimated 2-3 working days*
£65.70
£78.84 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149058) 12in x 18in Open End Double Scrim in Black
Matthews 12x18in Double Scrim
Attention
Estimated 2-3 working days*
£36.90
£44.28 inc VAT
Close
Matthews 12x18in Double Scrim
Matthews (149058) 12in x 18in Open End Double Scrim in Black
Attention
Estimated 2-3 working days*
£36.90
£44.28 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149064) 24in x 36in Double Open End Scrim in Black
Matthews 24x36in Double Scrim
Attention
Estimated 2-3 working days*
£65.70
£78.84 inc VAT
Close
Matthews 24x36in Double Scrim
Matthews (149064) 24in x 36in Double Open End Scrim in Black
Attention
Estimated 2-3 working days*
£65.70
£78.84 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149061) 18in x 24in Double Open End Scrim in Black
Matthews 18x24in Double Scrim
Attention
Estimated 2-3 working days*
£54.00
£64.80 inc VAT
Close
Matthews 18x24in Double Scrim
Matthews (149061) 18in x 24in Double Open End Scrim in Black
Attention
Estimated 2-3 working days*
£54.00
£64.80 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 169042  12inch x 18inch Flag
Matthews 12x18 inch Flag
Attention
Estimated 2-3 working days*
£35.10
£42.12 inc VAT
Close
Matthews 12x18 inch Flag
Matthews 169042 12inch x 18inch Flag
Attention
Estimated 2-3 working days*
£35.10
£42.12 inc VAT
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 350595 18 x 24 inch RoadRags Flag / Net Kit
Matthews 350595 RoadRags Kit
Attention
Estimated 2-3 working days*
£270.00
£324.00 inc VAT
Close
Matthews 350595 RoadRags Kit
Matthews 350595 18 x 24 inch RoadRags Flag / Net Kit
Attention
Estimated 2-3 working days*
£270.00
£324.00 inc VAT
ROADRAGS and ROADRAGS II are a new, patented, portable lighting modification system that allow the location photographer / videographer the ability to quickly and easily duplicate studio lighting effects on location using their portable lights. ROADRAGS consists of two folding 18"x24" frames, single scrim, double scrim, artificial silk, and flag with convenient carrying bag. Optional reflector panels are also available. ROADRAGS...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 350596 24 x 36 inch RoadRags II Flag / Net Kit
Matthews 350596 RoadRags II Kit
Attention
Estimated 2-3 working days*
£453.60
£544.32 inc VAT
Close
Matthews 350596 RoadRags II Kit
Matthews 350596 24 x 36 inch RoadRags II Flag / Net Kit
Attention
Estimated 2-3 working days*
£453.60
£544.32 inc VAT
ROADRAGS and ROADRAGS II are a new, patented, portable lighting modification system that allow the location photographer / videographer the ability to quickly and easily duplicate studio lighting effects on location using their portable lights. ROADRAGS consists of two folding 18"x24" frames, single scrim, double scrim, artificial silk, and flag with convenient carrying bag. Optional reflector panels are also available. ROADRAGS...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 169059  18inch x 24inch Flag
Matthews 18inch x 24inch Flag
Attention
Estimated 2-3 working days*
£37.80
£45.36 inc VAT
Close
Matthews 18inch x 24inch Flag
Matthews 169059 18inch x 24inch Flag
Attention
Estimated 2-3 working days*
£37.80
£45.36 inc VAT
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (159014) 48in x 48in Solid Frame Double Scrim in Black
Matthews 48x48in Black Scrim
Attention
Estimated 2-3 working days*
£151.20
£181.44 inc VAT
Close
Matthews 48x48in Black Scrim
Matthews (159014) 48in x 48in Solid Frame Double Scrim in Black
Attention
Estimated 2-3 working days*
£151.20
£181.44 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes To keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames stainless steel for durability. All Matthews Scrims and Flags are bordered with heavy duty colour coded webbing....
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149566) 24in x 36in Artificial Silk Open End Scrim in White
Matthews 24x36in Artificial Silk
Attention
Estimated 2-3 working days*
£48.60
£58.32 inc VAT
Close
Matthews 24x36in Artificial Silk
Matthews (149566) 24in x 36in Artificial Silk Open End Scrim in White
Attention
Estimated 2-3 working days*
£48.60
£58.32 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (159013) 48in x 48in Solid Frame Single Scrim in Black
Matthews 48x48in Black Scrim
Attention
Estimated 2-3 working days*
£109.80
£131.76 inc VAT
Close
Matthews 48x48in Black Scrim
Matthews (159013) 48in x 48in Solid Frame Single Scrim in Black
Attention
Estimated 2-3 working days*
£109.80
£131.76 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes To keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames stainless steel for durability. All Matthews Scrims and Flags are bordered with heavy duty colour coded webbing....
Full Details
Add to Basket
Quick Info
Matthews 999027 Road Flags Kit 48 x 48 inch
Matthews 999027 Road Flags Kit
No stock
Discontinued
£685.64
£822.77 inc VAT
Close
Matthews 999027 Road Flags Kit
Matthews 999027 Road Flags Kit 48 x 48 inch
No stock
Discontinued
£685.64
£822.77 inc VAT
Matthews Studio Equipment presents a new, versatile solution to duplicating studio lighting effects on location. Designed for today's highly mobile, location shooter, ROADFLAGS offers a larger 4' x 4' (122cm x 122cm) surface lighting modification in a convenient, easy-to-use portable kit. The "slip-on" fabrics allow for fast setup and packaging while offering larger fabric sizes to create a multitude of...
Full Details
Quick Info
Add to Basket
Matthews (149063) 24in x 36in Single Open End Scrim in Black
Matthews 24x36in Single Scrim
Attention
Estimated 2-3 working days*
£52.20
£62.64 inc VAT
Close
Matthews 24x36in Single Scrim
Matthews (149063) 24in x 36in Single Open End Scrim in Black
Attention
Estimated 2-3 working days*
£52.20
£62.64 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149043) 12in x 18in Open End Scrim Artificial Silk in White
Matthews 12x18in Artificial Silk
Attention
Estimated 2-3 working days*
£27.90
£33.48 inc VAT
Close
Matthews 12x18in Artificial Silk
Matthews (149043) 12in x 18in Open End Scrim Artificial Silk in White
Attention
Estimated 2-3 working days*
£27.90
£33.48 inc VAT
Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149068) 24in x 48in Double Open End Scrim in Black
Matthews 24x48in Double Scrim
Attention
Estimated 2-3 working days*
£106.20
£127.44 inc VAT
Close
Matthews 24x48in Double Scrim
Matthews (149068) 24in x 48in Double Open End Scrim in Black
Attention
Estimated 2-3 working days*
£106.20
£127.44 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (169067) 24inch x 72inch Cutter
Matthews 24in x 72in Cutter
Attention
Estimated 2-3 working days*
£143.10
£171.72 inc VAT
Close
Matthews 24in x 72in Cutter
Matthews (169067) 24inch x 72inch Cutter
Attention
Estimated 2-3 working days*
£143.10
£171.72 inc VAT
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149569) 24in x 48in Artificial Silk Open End Scrim in White
Matthews 24x48in Artificial Silk
Attention
Estimated 2-3 working days*
£61.20
£73.44 inc VAT
Close
Matthews 24x48in Artificial Silk
Matthews (149569) 24in x 48in Artificial Silk Open End Scrim in White
Attention
Estimated 2-3 working days*
£61.20
£73.44 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 119732 Standard 42 inch x 42 inch Reflector with Yoke Brake - Silver / Ship Crate included
Matthews 119732 42in Reflector
Attention
Estimated 2-3 working days*
£688.50
£826.20 inc VAT
Close
Matthews 119732 42in Reflector
Matthews 119732 Standard 42 inch x 42 inch Reflector with Yoke Brake - Silver / Ship Crate included
Attention
Estimated 2-3 working days*
£688.50
£826.20 inc VAT
Matthews offers several different types of Reflectors. The Standard Reflector measures 42" x 42" and is made of honeycomb material sandwiched between two sheets of aircraft aluminium, which is then set into an aluminium frame. The frame is then mounted into a yoke which has a 1-1/8" pin to fit a Combo Stand and a pivoting positive locking braking system. The...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149020) 30in x 36in Single Open End Scrim in Black
Matthews 30x36in Single Scrim
Attention
Estimated 2-3 working days*
£69.30
£83.16 inc VAT
Close
Matthews 30x36in Single Scrim
Matthews (149020) 30in x 36in Single Open End Scrim in Black
Attention
Estimated 2-3 working days*
£69.30
£83.16 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149105) 24in x 30in Single Open End Scrim in Black
Matthews 24x30in Black Single Scrim
Attention
Estimated 2-3 working days*
£54.00
£64.80 inc VAT
Close
Matthews 24x30in Black Single Scrim
Matthews (149105) 24in x 30in Single Open End Scrim in Black
Attention
Estimated 2-3 working days*
£54.00
£64.80 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149024) 30in x 36in Single Open End Scrim in White
Matthews 30x36in Single Scrim
Attention
Estimated 2-3 working days*
£97.20
£116.64 inc VAT
Close
Matthews 30x36in Single Scrim
Matthews (149024) 30in x 36in Single Open End Scrim in White
Attention
Estimated 2-3 working days*
£97.20
£116.64 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149107) 24in x 30in Artificial Silk Open End Scrim in White
Matthews 24x30in Artificial Silk Scrim
Attention
Estimated 2-3 working days*
£48.60
£58.32 inc VAT
Close
Matthews 24x30in Artificial Silk Scrim
Matthews (149107) 24in x 30in Artificial Silk Open End Scrim in White
Attention
Estimated 2-3 working days*
£48.60
£58.32 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149067) 24in x 48in Single Open End Scrim in Black
Matthews 24x48in Single Scrim
Attention
Estimated 2-3 working days*
£89.10
£106.92 inc VAT
Close
Matthews 24x48in Single Scrim
Matthews (149067) 24in x 48in Single Open End Scrim in Black
Attention
Estimated 2-3 working days*
£89.10
£106.92 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149052) 12in x 18in Open End Single Scrim in Black
Matthews 12x18in Black Single Scrim
Attention
Estimated 2-3 working days*
£32.40
£38.88 inc VAT
Close
Matthews 12x18in Black Single Scrim
Matthews (149052) 12in x 18in Open End Single Scrim in Black
Attention
Estimated 2-3 working days*
£32.40
£38.88 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (149021) 30in x 36in Double Open End Scrim in Black
Matthews 30x36in Double Scrim
Attention
Estimated 2-3 working days*
£86.40
£103.68 inc VAT
Close
Matthews 30x36in Double Scrim
Matthews (149021) 30in x 36in Double Open End Scrim in Black
Attention
Estimated 2-3 working days*
£86.40
£103.68 inc VAT
PLEASE NOTE: Similar model shown as image for illustrative purposes Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven...
Full Details
Add to Basket

Lighting Stands & Grip Equipment

Quick Info
Add to Basket
Matthews MD-756140 (MD756140) Hollywood 40 inch Double Riser Turtle Base, with Grip Head and Arm
Matthews MD-756140 C+ Stand
Attention
Extended lead time
£160.20
£192.24 inc VAT
Close
Matthews MD-756140 C+ Stand
Matthews MD-756140 (MD756140) Hollywood 40 inch Double Riser Turtle Base, with Grip Head and Arm
Attention
Extended lead time
£160.20
£192.24 inc VAT
One of the most popular models ever! Comes with a Turtle Base and Matthews Grip Head & Arm. Available in Black Universally seen as the best C-Stand, Griphead  and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all over the world. Matthews Hollywood Arms are...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-756040 (MD756040) Hollywood 40-inch Double Riser C-Stand (Silver) with Sliding Leg, Grip Head and Arm
Matthews MD-756040 C-Stand
Attention
Estimated 2-3 working days*
£146.70
£176.04 inc VAT
Close
Matthews MD-756040 C-Stand
Matthews MD-756040 (MD756040) Hollywood 40-inch Double Riser C-Stand (Silver) with Sliding Leg, Grip Head and Arm
Attention
Estimated 2-3 working days*
£146.70
£176.04 inc VAT
One of the most popular models ever! Comes with standard Sliding Leg and Matthews Grip Head & Arm. Supplied in silver finish, also available in black finish. Universally seen as the best C-Stand, Griphead  and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (MD-427802) Mini Boom
Matthews Mini Boom
Attention
Estimated 2-3 working days*
£118.80
£142.56 inc VAT
Close
Matthews Mini Boom
Matthews (MD-427802) Mini Boom
Attention
Estimated 2-3 working days*
£118.80
£142.56 inc VAT
The Mini Boom was designed because of the growing demand for a boom that would not bend when an array of accessories were added to it, like small lighting fixtures or strobes, such as light banks, egg crates etc.It is made completely out of steel, the Mini Boom mounts on a 5/8" Baby Pin and will extend over 80" (203cm),...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews B756040 (B-756040) Hollywood 40-inch Double Riser C-Stand (Black) with Sliding Leg, Grip Head and Arm
Matthews B756040 C-Stand
Attention
Estimated 2-3 working days*
£157.50
£189.00 inc VAT
Close
Matthews B756040 C-Stand
Matthews B756040 (B-756040) Hollywood 40-inch Double Riser C-Stand (Black) with Sliding Leg, Grip Head and Arm
Attention
Estimated 2-3 working days*
£157.50
£189.00 inc VAT
One of the most popular models ever! Comes with standard Sliding Leg and Matthews Grip Head & Arm. Supplied in black finish, also available in silver finish. Universally seen as the best C-Stand, Griphead  and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-655040 (MD655040) 40 inch Hollywood Head & Arm-Complete (102cm)
Matthews MD-655040 Head & Arm
Attention
Extended lead time
£53.10
£63.72 inc VAT
Close
Matthews MD-655040 Head & Arm
Matthews MD-655040 (MD655040) 40 inch Hollywood Head & Arm-Complete (102cm)
Attention
Extended lead time
£53.10
£63.72 inc VAT
Universally seen as the best Griphead and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all over the world. Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for fast, efficient,...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-420110 (MD420110) Matthellini Clamp - 2-inch End Jaw
Matthews MD-420110 Clamp
Green tick
14 in stock
£40.50
£48.60 inc VAT
Close
Matthews MD-420110 Clamp
Matthews MD-420110 (MD420110) Matthellini Clamp - 2-inch End Jaw
Green tick
14 in stock
£40.50
£48.60 inc VAT
This most versatile of clamps is now an industry favorite problem solver.Providing strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw and 2" or 6" End Jaw. The Center Jaw has...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-350580 (MD350580) Hollywood 2-1/2 inch Grip Head
Matthews MD-350580 Grip Head
Green tick
13 in stock
£24.30
£29.16 inc VAT
Close
Matthews MD-350580 Grip Head
Matthews MD-350580 (MD350580) Hollywood 2-1/2 inch Grip Head
Green tick
13 in stock
£24.30
£29.16 inc VAT
Matthews Grip Heads are the strongest in the business! Set it and forget it...plates feature two holes of 3/8" and 5/8" diameter that eliminate any confusion. New castings offer positive lock in all directions. 2.5" size also comes in a millimeter version, new this year by Matthews.  Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-B387486 (MDB387486) Reverse Folding Stand - Black
Matthews MD-B387486 Stand
Attention
Estimated 2-3 working days*
£53.10
£63.72 inc VAT
Close
Matthews MD-B387486 Stand
Matthews MD-B387486 (MDB387486) Reverse Folding Stand - Black
Attention
Estimated 2-3 working days*
£53.10
£63.72 inc VAT
A really popular kit stand that packs down for storage like no other – without compromising quality. Now here's a clever idea that really complements your imagination - Matthews Reverse Stand. An innovative approach to folding a stand without compromising the stand's integrity or capacity. It's a tough little stand with a really neat feature! The dimensions are particularly impressive when you...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 259538 Eighth Apple Box - 12 inch x 1 inch x 20 inch
Matthews 259538 Apple Box
Attention
Estimated 2-3 working days*
£29.70
£35.64 inc VAT
Close
Matthews 259538 Apple Box
Matthews 259538 Eighth Apple Box - 12 inch x 1 inch x 20 inch
Attention
Estimated 2-3 working days*
£29.70
£35.64 inc VAT
Apple Boxes - Use them for propping or levelling, sitting or standing. Nail Wall Plates to them to hold low angle lighting fixtures and multiple other purposes. A Full Apple Box is equivalent to two 1/2 Apples, four 1/4 Apples and eight 1/8 Apples (pancake). Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-420101 (MD420101) Matthellini Clamp - 3 Inch Center Jaw
Matthews 420101 Clamp
Attention
Estimated 2-3 working days*
£40.50
£48.60 inc VAT
Close
Matthews 420101 Clamp
Matthews MD-420101 (MD420101) Matthellini Clamp - 3 Inch Center Jaw
Attention
Estimated 2-3 working days*
£40.50
£48.60 inc VAT
This most versatile of clamps is now an industry favorite problem solver. Providing strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw and 2" or 6" End Jaw. The Center Jaw has...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-655020 (MD655020) 20 inch Hollywood Head & Arm-Complete (51cm)
Matthews MD-655020 Head & Arm
Attention
Estimated 2-3 working days*
£49.50
£59.40 inc VAT
Close
Matthews MD-655020 Head & Arm
Matthews MD-655020 (MD655020) 20 inch Hollywood Head & Arm-Complete (51cm)
Attention
Estimated 2-3 working days*
£49.50
£59.40 inc VAT
Universally seen as the best Griphead and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all over the world. Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for fast, efficient,...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews B389788 (B-389788) Medium Duty Kit Stand (black)
Matthews B389788 Medium Stand
Attention
Estimated 2-3 working days*
£78.30
£93.96 inc VAT
Close
Matthews B389788 Medium Stand
Matthews B389788 (B-389788) Medium Duty Kit Stand (black)
Attention
Estimated 2-3 working days*
£78.30
£93.96 inc VAT
Designed primarily for use in lighting kits, these stands are compact and light weight, ideal for assembling custom lighting kits or replacing your current stands. Matthews Revenger Stands employ a brake shoe system for locking off the riser tubes as opposed to pinch castings, therefore permitting the use of heavier fixtures. Revenger stands feature a wider footprint for increased stability,...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 861862 Monitor Mount - Works with Light Stands, C-stands and any other mounting device with a 5/8 inch pin
Matthews 861862 Monitor Mount
Green tick
7 in stock
£166.50
£199.80 inc VAT
Close
Matthews 861862 Monitor Mount
Matthews 861862 Monitor Mount - Works with Light Stands, C-stands and any other mounting device with a 5/8 inch pin
Green tick
7 in stock
£166.50
£199.80 inc VAT
CNC Machined from 6061 T-6 aluminium billet, Matthews now offers the strongest, most versatile and compact monitor mount available. Because it's not a casting, this mount will support any size monitor that does not exceed 65lbs (30kg). Works with light stands, C-stands, or any other mounting device with a 16mm baby pin. Folds flat to monitor for storage and transportation. It...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 420113 Extendellini - Lengthen your Matthellini clamp
Matthews 420113 Clamp Extender
Attention
Estimated 2-3 working days*
£20.70
£24.84 inc VAT
Close
Matthews 420113 Clamp Extender
Matthews 420113 Extendellini - Lengthen your Matthellini clamp
Attention
Estimated 2-3 working days*
£20.70
£24.84 inc VAT
This most versatile of clamps is now an industry favorite problem solver. Providing strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw and 2" or 6" End Jaw. The Center Jaw has...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 299887 Boa Bag - 10lb (4.54 kg) Black
Matthews 299887 Boa Bag 10lb
Attention
Estimated 2-3 working days*
£42.30
£50.76 inc VAT
Close
Matthews 299887 Boa Bag 10lb
Matthews 299887 Boa Bag - 10lb (4.54 kg) Black
Attention
Estimated 2-3 working days*
£42.30
£50.76 inc VAT
Matthews introduces a new concept to a well established piece of grip equipment - BOA BAGS. This versatile steel shot bag quickly wraps around the base of any stand, column, brace, T-handle, arm, or boom. Available in three sizes.  Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 350598 MiniGrip Mounting Kit
Matthews 350598 Mounting Kit
Attention
Estimated 2-3 working days*
£259.20
£311.04 inc VAT
Close
Matthews 350598 Mounting Kit
Matthews 350598 MiniGrip Mounting Kit
Attention
Estimated 2-3 working days*
£259.20
£311.04 inc VAT
MINIGRIP - A whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. When used with Matthews' new ROADRAGS kit, the MINIGRIP system eliminates the need for extra stands...the MINIGRIP kit consists of four lightweight 2" MiniGrip Heads with 3/8" and 5/8" mounting holes...two new Mini-Matthellini Clamps...which are half as...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 429678 Drop Ceiling Scissor Clamp with 5/8 inch Pin
Matthews 429678 Scissor Clamp
Attention
Estimated 2-3 working days*
£15.30
£18.36 inc VAT
Close
Matthews 429678 Scissor Clamp
Matthews 429678 Drop Ceiling Scissor Clamp with 5/8 inch Pin
Attention
Estimated 2-3 working days*
£15.30
£18.36 inc VAT
Made to attach to the dropped ceiling tile support rails found in many offices it affords the mounting of small lighting instruments on its 5/8" pin without the need for a stand. The Drop Ceiling Cable Holder (included with clip) clips onto the 5/8" pin to keep cables near the ceiling and out of the shot. A Drop Ceiling Scissor...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 350627 SUPERFLEX NOGA Arm - Large 22 inch
Matthews 350627 NOGA Arm 22in
Green tick
1 in stock
£146.70
£176.04 inc VAT
Close
Matthews 350627 NOGA Arm 22in
Matthews 350627 SUPERFLEX NOGA Arm - Large 22 inch
Green tick
1 in stock
£146.70
£176.04 inc VAT
The new NOGA Arms by Matthews: articulated, multi-jointed arms that are the strongest and most versatile yet in the industry, offering many more features and benefits than their predecessor. The redefined NOGA Arms are larger, longer, tougher and stronger than any other extended three-joint articulated arm on the market. NOGA Arms will hold smaller cameras, lights, monitors, props and other production...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 429085 6-inch Baby Plate
Matthews 429085 Baby Plate
Attention
Estimated 2-3 working days*
£17.10
£20.52 inc VAT
Close
Matthews 429085 Baby Plate
Matthews 429085 6-inch Baby Plate
Attention
Estimated 2-3 working days*
£17.10
£20.52 inc VAT
This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby Nail On, 750 Pigeon, or just Nail On Plate. Matthews manufactures Baby Plates in...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 420210 Matthellini Clamp with 6 inch End Jaw
Matthews Clamp w/ 6in End Jaw
Attention
Estimated 4-6 weeks*
£61.20
£73.44 inc VAT
Close
Matthews Clamp w/ 6in End Jaw
Matthews 420210 Matthellini Clamp with 6 inch End Jaw
Attention
Estimated 4-6 weeks*
£61.20
£73.44 inc VAT
Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. The End Jaw has the fixed jaw mounted at the end of the threaded portion of the shaft. Superior in tight places....
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 299888 Boa Bag - 15lb (6.82 kg) Black
Matthews 299888 Boa Bag 15lb
Attention
Estimated 2-3 working days*
£55.80
£66.96 inc VAT
Close
Matthews 299888 Boa Bag 15lb
Matthews 299888 Boa Bag - 15lb (6.82 kg) Black
Attention
Estimated 2-3 working days*
£55.80
£66.96 inc VAT
Matthews introduces a new concept to a well established piece of grip equipment - BOA BAGS. This versatile steel shot bag quickly wraps around the base of any stand, column, brace, T-handle, arm, or boom. Available in three sizes.  Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-B387485 (MDB387485) Kit Stand Maxi - Black/ Aluminium Medium / Lightweight
Matthews MD-B387485 Kit Stand
Attention
Estimated 2-3 working days*
£83.70
£100.44 inc VAT
Close
Matthews MD-B387485 Kit Stand
Matthews MD-B387485 (MDB387485) Kit Stand Maxi - Black/ Aluminium Medium / Lightweight
Attention
Estimated 2-3 working days*
£83.70
£100.44 inc VAT
One of the most popular Lightweight Kit stands on the market Designed primarily for use in lighting kits, these stands are compact and light weight, ideal for assembling custom lighting kits or replacing your current stands. Matthews Revenger Stands employ a 'brake shoe' system for locking off the riser tubes as opposed to 'pinch castings', therefore permitting the use of heavier...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 299599 Water Repellant Sandbag 25lb (11.3 kg)
Matthews 299599 Sandbag 25lb
Attention
Estimated 2-3 working days*
£32.40
£38.88 inc VAT
Close
Matthews 299599 Sandbag 25lb
Matthews 299599 Water Repellant Sandbag 25lb (11.3 kg)
Attention
Estimated 2-3 working days*
£32.40
£38.88 inc VAT
Sandbags are used whenever you need extra weight to prevent tipping. You usually "bag" stands especially when the weight is off center such as with a heavy Scrim. They help stabilize equipment in windy situations and can counter balance Boom Arm applications. Matthews fills our Sandbags with sanitized sand to prevent algae growth if they get damp....
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-756020 (MD756020) Hollywood 20 inch Double Riser Sliding Leg, with Grip Head and Arm
Matthews MD-756020 C-Stand
Attention
Estimated 2-3 working days*
£139.50
£167.40 inc VAT
Close
Matthews MD-756020 C-Stand
Matthews MD-756020 (MD756020) Hollywood 20 inch Double Riser Sliding Leg, with Grip Head and Arm
Attention
Estimated 2-3 working days*
£139.50
£167.40 inc VAT
One of the most popular models ever! Comes with standard Sliding Leg and Matthews Grip Head & Arm. Available in Black Finish. Universally seen as the best C-Stand, Griphead  and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all over the world. Matthews Hollywood Arms...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 756020 Hollywood 20-inch Double Riser C-Stand with Sliding Leg, Grip Head and Arm
Matthews 756020 C-Stand
Attention
Estimated 2-3 working days*
£139.50
£167.40 inc VAT
Close
Matthews 756020 C-Stand
Matthews 756020 Hollywood 20-inch Double Riser C-Stand with Sliding Leg, Grip Head and Arm
Attention
Estimated 2-3 working days*
£139.50
£167.40 inc VAT
Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from the sun. Large reflectors would be positioned to bounce back or kick the...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 299886 Boa Weight Bag - 5lb (2.27 kg) Black
Matthews 299886 Boa Bag 5lb
Attention
Estimated 2-3 working days*
£32.40
£38.88 inc VAT
Close
Matthews 299886 Boa Bag 5lb
Matthews 299886 Boa Weight Bag - 5lb (2.27 kg) Black
Attention
Estimated 2-3 working days*
£32.40
£38.88 inc VAT
Matthews introduces a new concept to a well established piece of grip equipment - BOA BAGS. This versatile steel shot bag quickly wraps around the base of any stand, column, brace, T-handle, arm, or boom. Available in three sizes.  Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 350626 SUPERFLEX NOGA Arm - Medium 10.5 inch
Matthews 350626 NOGA Arm
Attention
Estimated 2-3 working days*
£138.60
£166.32 inc VAT
Close
Matthews 350626 NOGA Arm
Matthews 350626 SUPERFLEX NOGA Arm - Medium 10.5 inch
Attention
Estimated 2-3 working days*
£138.60
£166.32 inc VAT
The new NOGA Arms by Matthews: articulated, multi-jointed arms that are the strongest and most versatile yet in the industry, offering many more features and benefits than their predecessor. The redefined NOGA Arms are larger, longer, tougher and stronger than any other extended three-joint articulated arm on the market. NOGA Arms will hold smaller cameras, lights, monitors, props and other production...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 427802 Mini Boom - Extends from 45 inch (115cm) to over 80 inch (203cm)
Matthews 427802 Mini Boom
Attention
Estimated 2-3 working days*
£162.90
£195.48 inc VAT
Close
Matthews 427802 Mini Boom
Matthews 427802 Mini Boom - Extends from 45 inch (115cm) to over 80 inch (203cm)
Attention
Estimated 2-3 working days*
£162.90
£195.48 inc VAT
Mini Boom: Designed because of the growing demand for a boom that would not bend when an array of accessories were added to it, like small lighting fixtures or strobes, such as light banks, egg crates etc. Made completely out of steel, the Mini Boom mounts on a 5/8" Baby Pin and will extend over 80" (203cm), terminating in a...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 429029 Stand / SPUD Adapter - 1-1/8-inch to 5/8-inch
Matthews 429029 Stand Adapter
Attention
Estimated 2-3 working days*
£23.40
£28.08 inc VAT
Close
Matthews 429029 Stand Adapter
Matthews 429029 Stand / SPUD Adapter - 1-1/8-inch to 5/8-inch
Attention
Estimated 2-3 working days*
£23.40
£28.08 inc VAT
Machined from solid steel The Stand Adapter is exceptionally strong. Used to convert Junior 1-1/8" female to Baby 5/8" male....
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews H386025 (H-386025) Hollywood Baby Jr. Double Riser Lighting Stand
Matthews H386025 Baby Jr Stand
Attention
Estimated 2-3 working days*
£270.00
£324.00 inc VAT
Close
Matthews H386025 Baby Jr Stand
Matthews H386025 (H-386025) Hollywood Baby Jr. Double Riser Lighting Stand
Attention
Estimated 2-3 working days*
£270.00
£324.00 inc VAT
These very popular lighting stands for Baby fixtures which require a 5/8' mounting pin are made with steel legs and riser assembly. The tripod braced base with 'all-axis' non-marking locking casters provides great stability. Unlike others, Matthews rolling stands track in a straight line - especially important when moving overheads or butterflies. No more clumsy foot castings. Wheel is protected when...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-349581 (MD349581) Hollywood Head 4.5 inch Grip Head
Matthews MD-349581 Grip Head
Attention
Estimated 4-6 weeks*
£58.50
£70.20 inc VAT
Close
Matthews MD-349581 Grip Head
Matthews MD-349581 (MD349581) Hollywood Head 4.5 inch Grip Head
Attention
Estimated 4-6 weeks*
£58.50
£70.20 inc VAT
Matthews Grip Heads are the strongest in the business! Set it and forget it...plates feature two holes of 3/8" and 5/8" diameter that eliminate any confusion. New castings offer positive lock in all directions. 2.5" size also comes in a millimeter version, new this year by Matthews.  Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video...
Full Details
Add to Basket
Quick Info
Select Option
Matthews 369673 Hollywood Combo Double Riser Lighting Stand
Matthews 369673 Combo Stand
Attention
Special Order. Expect long wait
£208.80
£250.56 inc VAT
Close
Matthews 369673 Combo Stand
Matthews 369673 Hollywood Combo Double Riser Lighting Stand
Attention
Special Order. Expect long wait
from: £208.80
£250.56 inc VAT
A Stand with an attitude! Wider footprint and longer legs provide increased stability. Complete with Rocky Mountain Leg and steel construction. Available with aluminium risers upon request. Will accept Matthews 366066 Combo Adapter Wheels. Matthews’s casters are locking and non-marking. This is made from steel components, not plastic therefore will provide years of durable service....
Full Details
Select Option
Quick Info
Add to Basket
Matthews MD-387485 (MD387485) Medium Duty Maxi Steel Kit Stand
Matthews MD-387485 Kit Stand
Attention
Estimated 2-3 working days*
£83.70
£100.44 inc VAT
Close
Matthews MD-387485 Kit Stand
Matthews MD-387485 (MD387485) Medium Duty Maxi Steel Kit Stand
Attention
Estimated 2-3 working days*
£83.70
£100.44 inc VAT
One of the most popular and most durable Kit stands on the market. Designed primarily for use in lighting kits, these stands are compact and light weight, ideal for assembling custom lighting kits or replacing your current stands. Matthews Revenger Stands employ a 'brake shoe' system for locking off the riser tubes as opposed to 'pinch castings', therefore permitting the...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 366165 Hollywood Combo Triple Riser Lighting Stand
Matthews 366165 Combo Stand
Attention
Estimated 2-3 working days*
£216.00
£259.20 inc VAT
Close
Matthews 366165 Combo Stand
Matthews 366165 Hollywood Combo Triple Riser Lighting Stand
Attention
Estimated 2-3 working days*
£216.00
£259.20 inc VAT
A Stand with an attitude! Wider footprint and longer legs provide increased stability. Complete with Rocky Mountain Leg and steel construction. Available with aluminium risers upon request. Will accept Matthews 366066 Combo Adapter Wheels. Matthews’s casters are locking and non-marking. This is made from steel components, not plastic therefore will provide years of durable service....
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 366066 Low Boy Double Riser Combo Lighting Stand - Steel
Matthews 366066 Low Boy Stand
Attention
Estimated 2-3 working days*
£254.70
£305.64 inc VAT
Close
Matthews 366066 Low Boy Stand
Matthews 366066 Low Boy Double Riser Combo Lighting Stand - Steel
Attention
Estimated 2-3 working days*
£254.70
£305.64 inc VAT
A Stand with an attitude! Wider footprint and longer legs provide increased stability. Complete with Rocky Mountain Leg and steel construction. Available with aluminum risers upon request. Will accept Matthews #366068 Combo Adapter Wheels....
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-420100 (MD420100) Matthellini Clamp — 2 inch Center Jaw
Matthews MD-420100 Clamp
Attention
Estimated 2-3 working days*
£40.50
£48.60 inc VAT
Close
Matthews MD-420100 Clamp
Matthews MD-420100 (MD420100) Matthellini Clamp — 2 inch Center Jaw
Attention
Estimated 2-3 working days*
£40.50
£48.60 inc VAT
This most versatile of clamps is now an industry favorite problem solver. Providing strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw and 2" or 6" End Jaw. The Center Jaw has...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 429620 Big Ben Clamp
Matthews 429620 Clamp
Attention
Estimated 2-3 working days*
£55.80
£66.96 inc VAT
Close
Matthews 429620 Clamp
Matthews 429620 Big Ben Clamp
Attention
Estimated 2-3 working days*
£55.80
£66.96 inc VAT
Big Ben Clamp - Easy production Clamp with hand grip  A "cheeseboro" clamp with a 1-1/8" pin attached to it serves multiple purposes. Use it with a piece of pipe with a diameter of 1-1/4" to 1-1/2" as a temporary overhead grid. Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 425157 Baby Grid Clamp - 16mm Spigot
Matthews 425157 Baby Grid Clamp
Attention
Estimated 2-3 working days*
£47.70
£57.24 inc VAT
Close
Matthews 425157 Baby Grid Clamp
Matthews 425157 Baby Grid Clamp - 16mm Spigot
Attention
Estimated 2-3 working days*
£47.70
£57.24 inc VAT
Baby Grid Clamp- Easy production Clamp with hand grip. Made to clamp securely on overhead grids, car rigs, or camera car rails for mounting light fixtures. The Baby Grid Clamp can also be inverted with the pin mounting into a Grip Head for spanning pipe between two stands. Clamp will grip a pipe having a minimum diameter of 1-1/4" (1.660) OD...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 299853  25 Lb. Shot Bag
Matthews 25lb Shot Bag
Attention
Estimated 2-3 working days*
£69.30
£83.16 inc VAT
Close
Matthews 25lb Shot Bag
Matthews 299853 25 Lb. Shot Bag
Attention
Estimated 2-3 working days*
£69.30
£83.16 inc VAT
This black cordura shot bag is filled with 25lb of steel shot rather than lead shot as is often used. Please Note: Image for illustration purposes only, 5lb version shown, 25lb version will be shipped....
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews B377701 (B-377701) Mini MAX Lighting Stand
Matthews B377701 MAX Stand
Attention
Estimated 2-3 working days*
£999.00
£1,198.80 inc VAT
Close
Matthews B377701 MAX Stand
Matthews B377701 (B-377701) Mini MAX Lighting Stand
Attention
Estimated 2-3 working days*
£999.00
£1,198.80 inc VAT
MINI MAX is the smaller compact version of Matthews very successful and very popular MAX. Like its larger counterpart, MINI MAX allows you to hang a fixture in places where no other lighting support system may go - either into a corner or flush to the wall - as there are neither rear rails nor pipes required for counterbalance. When...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 429752  Heavy Duty Baby Side Arm
Matthews 429752 Side Arm
Attention
Estimated 2-3 working days*
£94.50
£113.40 inc VAT
Close
Matthews 429752 Side Arm
Matthews 429752 Heavy Duty Baby Side Arm
Attention
Estimated 2-3 working days*
£94.50
£113.40 inc VAT
Side Arms can be clamped anywhere on the stand riser, allowing a light to be lowered to just above the legs and slightly offset, without the need for another stand. The Heavy Duty Side Arms utilize a special vice clamp and are made with heavier materials. In both cases, the Baby terminates in double 16mm pins and the Junior in...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-369675 (MD369675) Digital Combo Stand
Matthews MD-369675 Stand
Attention
Estimated 2-3 working days*
£167.40
£200.88 inc VAT
Close
Matthews MD-369675 Stand
Matthews MD-369675 (MD369675) Digital Combo Stand
Attention
Estimated 2-3 working days*
£167.40
£200.88 inc VAT
Matthews Digital presents this high-quality lighting stand for the demanding professional. Innovative, robust and durable, the Matthews Digital lighting stands are becoming an integral component of location and studio lighting packages. Additionally, each riser section is spring-dampened, ensuring the stand may be safely lowered. Designed to be stronger and lighter than other manufacturers' more expensive aluminum stands, this is a...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 387402 Kit - Medium Duty Triple Riser Kit Stand - Black (20 Piece Minimum)
Matthews 387402 Kit Stand
Attention
Estimated 2-3 working days*
£49.50
£59.40 inc VAT
Close
Matthews 387402 Kit Stand
Matthews 387402 Kit - Medium Duty Triple Riser Kit Stand - Black (20 Piece Minimum)
Attention
Estimated 2-3 working days*
£49.50
£59.40 inc VAT
Designed primarily for their use in lighting kits, these stands are compact and light weight. They are ideal for assembling custom lighting kits or as a replacement. Many Matthews Revenger Stands employ a " Brake Shoe " system for locking off the riser tubes as opposed to " Pinch Castings ", therefore permitting the use of heavier fixtures....
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews H386021 (H-386021) Hollywood Low Boy Junior Double Riser Lighting Stand - Rolling
Matthews Junior Low Boy Stand
Attention
Estimated 2-3 working days*
£291.60
£349.92 inc VAT
Close
Matthews Junior Low Boy Stand
Matthews H386021 (H-386021) Hollywood Low Boy Junior Double Riser Lighting Stand - Rolling
Attention
Estimated 2-3 working days*
£291.60
£349.92 inc VAT
Designed for larger lighting fixtures, these stands are built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal 28mm Posi-V-Lock female receiver with pop up 16mm male pin, the Senior Stands are made for fixtures weighing up to 88 pounds. Please refer to the technical specification...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (B377701) Mini Max
Matthews Mini Max
Attention
Estimated 2-3 working days*
£999.00
£1,198.80 inc VAT
Close
Matthews Mini Max
Matthews (B377701) Mini Max
Attention
Estimated 2-3 working days*
£999.00
£1,198.80 inc VAT
The Mini Max allows you to hang a fixture in places where no other lighting support system may go - either into a corner or flush to the wall - as there are neither rear rails nor pipes required for counterbalance. When the POV will not accommodate a stand or fixture placement, Mini Max can 'fly' right in, making it...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 425158 Junior Grid Clamp - 28mm Receiver
Matthews 425158 Grid Clamp
Attention
Estimated 2-3 working days*
£52.20
£62.64 inc VAT
Close
Matthews 425158 Grid Clamp
Matthews 425158 Junior Grid Clamp - 28mm Receiver
Attention
Estimated 2-3 working days*
£52.20
£62.64 inc VAT
Junior Grid Clamp - Easy production Clamp with hand grip   For mounting larger lighting fixtures securely to overhead grids, car rigs, or camera car rails. Clamp will grip 1-1/4" pipe (1.660) OD minimum diameter, to a maximum of 1-1/2" pipe (1.990) OD....
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews (999042) Magic Stand with Runaway Base
Matthews Magic Stand
Attention
Estimated 2-3 working days*
£756.00
£907.20 inc VAT
Close
Matthews Magic Stand
Matthews (999042) Magic Stand with Runaway Base
Attention
Estimated 2-3 working days*
£756.00
£907.20 inc VAT
With the Runway Base added, the Magic Stand can be a regular rolling light stand. It can be a high rolling light stand, and it can also convert to a two section light boom with its own rolling stand. Its versatility is truly magical, whether a light needs to be placed at floor height, or behind as a hair light...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews 369675 Digital Combo Stand includes 5/8 inch Pin, 1-1/4 inch Receiver, Rocky Mountain Leg and Rack Mount Adapter
Matthews 369675 Combo Stand
Attention
Estimated 2-3 working days*
£167.40
£200.88 inc VAT
Close
Matthews 369675 Combo Stand
Matthews 369675 Digital Combo Stand includes 5/8 inch Pin, 1-1/4 inch Receiver, Rocky Mountain Leg and Rack Mount Adapter
Attention
Estimated 2-3 working days*
£167.40
£200.88 inc VAT
Matthews Digital presents a new, high-quality lighting stand for the demanding professional. Innovative, robust and durable, the Matthews Digital lighting stands are becoming an integral component of location and studio lighting packages. Additionally, each riser section is spring-dampened, ensuring the stand may be safely lowered. Designed to be stronger and lighter than other manufacturers' more expensive aluminum combo stands, Matthews...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-387030 (MD387030) Hollywood Beefy Baby Double Riser Stand with Rocky Mountain Leg
Matthews MD-387030 Baby Stand
Attention
Estimated 2-3 working days*
£167.40
£200.88 inc VAT
Close
Matthews MD-387030 Baby Stand
Matthews MD-387030 (MD387030) Hollywood Beefy Baby Double Riser Stand with Rocky Mountain Leg
Attention
Estimated 2-3 working days*
£167.40
£200.88 inc VAT
The Hollywood Beefy Baby is a popular stand that offers the duty of a heavier stand by combining steel and Ali.. The legs are made of steel instead of aluminum to provide greater stability and longer wear. The top riser which is the smallest in diameter is also made of steel increasing its strength and permitting the 5/8" Baby Pin...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-B387487 (MDB387487) Kit Stand - Medium Duty Black Light / Heavy Double Riser
Matthews MD-B387487 Kit Stand
Green tick
4 in stock
£88.20
£105.84 inc VAT
Close
Matthews MD-B387487 Kit Stand
Matthews MD-B387487 (MDB387487) Kit Stand - Medium Duty Black Light / Heavy Double Riser
Green tick
4 in stock
£88.20
£105.84 inc VAT
This lightweight Kit stand is an excellent medium to heavy sized stand with good support, height and stability – built to Matthews high standards. Designed primarily for use in lighting kits, these stands are compact and light weight, ideal for assembling custom lighting kits or replacing your current stands. Matthews Revenger Stands employ a 'brake shoe' system for locking off the...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-387031 (MD387031) Hollywood Beefy Baby Triple Riser Stand with Rocky Mountain Leg
Matthews MD-387031 Baby Stand
Attention
Estimated 2-3 working days*
£188.10
£225.72 inc VAT
Close
Matthews MD-387031 Baby Stand
Matthews MD-387031 (MD387031) Hollywood Beefy Baby Triple Riser Stand with Rocky Mountain Leg
Attention
Estimated 2-3 working days*
£188.10
£225.72 inc VAT
The Hollywood Beefy Baby is a popular stand that offers the duty of a heavier stand by combining steel and Ali.. The legs are made of steel instead of aluminum to provide greater stability and longer wear. The top riser which is the smallest in diameter is also made of steel increasing its strength and permitting the 5/8" Baby Pin...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-387032 (MD387032) Digital Baby Stand
Matthews MD-387032 Baby Stand
Attention
Estimated 2-3 working days*
£192.60
£231.12 inc VAT
Close
Matthews MD-387032 Baby Stand
Matthews MD-387032 (MD387032) Digital Baby Stand
Attention
Estimated 2-3 working days*
£192.60
£231.12 inc VAT
Matthews Digital presents this high-quality lighting stand for the demanding professional. Innovative, robust and durable, the Matthews Digital lighting stands are becoming an integral component of location and studio lighting packages. Additionally, each riser section is spring-dampened, ensuring the stand may be safely lowered. Designed to be stronger and lighter than other manufacturers' more expensive aluminum stands, this is a...
Full Details
Add to Basket
Quick Info
Add to Basket
Matthews MD-B387490 (MDB387490) Kit - Light / Heavy Triple Riser Kit Stand - Black
Matthews MD-B387490 Kit Stand
Attention
Estimated 2-3 working days*
£104.40
£125.28 inc VAT
Close
Matthews MD-B387490 Kit Stand
Matthews MD-B387490 (MDB387490) Kit - Light / Heavy Triple Riser Kit Stand - Black
Attention
Estimated 2-3 working days*
£104.40
£125.28 inc VAT
For a lightweight Kit stand this larger version provides a little extra support, height and stability compared to the average – built to Matthews high standards an excellent addition if you need a little extra. Designed primarily for use in lighting kits, these stands are compact and light weight, ideal for assembling custom lighting kits or replacing your current stands. Matthews...
Full Details
Add to Basket
Shopping Basket 0 Item(s):
£0.00
Estimated Shipping:
Shipping Details
Available Shipping Price
--
:
£0.00

Back

Feedback

Latest Products

1
2
3
4
5
6
7
8
9
10
Copyright © 1986-2017 | CVP Group | CVP Blog E&OE 25 March 2017 22:06 GMT

Subject to status. Terms and Conditions apply. Creative Video Productions Ltd acts as a broker and offers finance from a restricted range of finance providers.
Finance provided by PayPal Credit, a trading name of PayPal (Europe) S.à r.l. et Cie, S.C.A., 22-24 Boulevard Royal L-2449, Luxembourg