This website uses cookies. By continuing to browse the site you are agreeing to our use of cookies.

Hague Camera Supports Products in Cinematography

Tripods & Support

Quick Info
Add to Basket
Hague D5T (D5-T) Camera Tripod Tracking Dolly Kit
Hague D5T Tracking Dolly Kit
Green tick
3 in stock
£235.00
£282.00 inc VAT
Close
Hague D5T Tracking Dolly Kit
Hague D5T (D5-T) Camera Tripod Tracking Dolly Kit
Green tick
3 in stock
£235.00
£282.00 inc VAT
Please note: Camera and accessories NOT included. See included tab for contents The Hague D5T Tripod Tracking Dolly Kit is a quick and easy to use system that has been designed to create super smooth tracking shots with your own tripod. The dolly has two sets of locating holes for the tripod legs which means the tripod can be used in...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague SM1 (SM-1) Car Camera Suction Mount with Double Ball Tilt Head
SM1 Camera Suction Mount
Green tick
3 in stock
£65.00
£78.00 inc VAT
Close
SM1 Camera Suction Mount
Hague SM1 (SM-1) Car Camera Suction Mount with Double Ball Tilt Head
Green tick
3 in stock
£65.00
£78.00 inc VAT
The Hague SM1 Car Camera Suction Mount can be attached to any non-porous surface, which makes it ideal for mounting the camera onto a vehicle whether inside or out. It can be fixed either vertically or horizontally. The camera fastens to a reversible camera plate, which enables the camera to be mounted above or below the suction mount. This makes it...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague SM3 (SM-3) Pro Camera Suction Mount Kit for Cars
Hague SM3 Car Suction Mount
Green tick
2 in stock
£340.00
£408.00 inc VAT
Close
Hague SM3 Car Suction Mount
Hague SM3 (SM-3) Pro Camera Suction Mount Kit for Cars
Green tick
2 in stock
£340.00
£408.00 inc VAT
The Hague SM3 Pro Suction Mount for cars has 3 suction pads which can be attached to any horizontal or vertical, non-porous flat surface. There are 3 adjustable brackets on the suction pads and 3 on the triangle plate, with a selection of connecting poles of different lengths so the mount can be used in a variety of positions. The triangle...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague EDGE (ED-GE) Camslide Edge Carbon Fibre Camera Slider - 80cm
Hague EDGE Camera Slider
Attention
Estimated 2-3 working days*
£165.00
£198.00 inc VAT
Close
Hague EDGE Camera Slider
Hague EDGE (ED-GE) Camslide Edge Carbon Fibre Camera Slider - 80cm
Attention
Estimated 2-3 working days*
£165.00
£198.00 inc VAT
Please note: Camera and other accessories pictured NOT included The Hague Camslide Edge camera slider is made from lightweight carbon fibre and provides a smooth sliding movement for professional tracking shots. Measuring 80cm in length the Camslide Edge offers a very workable length and can be used on the ground, a table or tripod mounted. The Camslide Edge has a heavy duty...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague CHM (CH-M) Camcorder Car Headrest Mount
Hague CHM Headrest Mount
Green tick
1 in stock
£45.00
£54.00 inc VAT
Close
Hague CHM Headrest Mount
Hague CHM (CH-M) Camcorder Car Headrest Mount
Green tick
1 in stock
£45.00
£54.00 inc VAT
*Headrest and cameras NOT included The Hague CHM Camera Headrest Mount enables the camera to be mounted onto a car's headrest. It is fully adjustable for the different widths of headrest. The camera attaches to a ball mount, so the camera can be set to the required position. You get a great view from the drivers prospective or it can be...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague REACH-500 (REACH500) Camslide Reach 500 Camera Slider - 500mm
Hague REACH-500 Camera Slider
Attention
Estimated 2-3 working days*
£240.00
£288.00 inc VAT
Close
Hague REACH-500 Camera Slider
Hague REACH-500 (REACH500) Camslide Reach 500 Camera Slider - 500mm
Attention
Estimated 2-3 working days*
£240.00
£288.00 inc VAT
Please note: Camera, tripod, video head and other accessories pictured NOT included Increase your slide with the Hague Camslide Reach 500 camera slider. The Camslide Reach has been designed to give you almost double the slide when used on a tripod. With its compact design and additional travel the Camslide Reach 500 is the perfect solution for people looking to get...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague K8 (K-8) HDV Boom Camera Jib
Hague K8 Boom Jib
Attention
Estimated 2-3 working days*
£330.00
£396.00 inc VAT
Close
Hague K8 Boom Jib
Hague K8 (K-8) HDV Boom Camera Jib
Attention
Estimated 2-3 working days*
£330.00
£396.00 inc VAT
Please note: Does not include tripod, weights, quick release adaptor and camera. The Hague HDV Boom K8 is ideal for cameras up to 4kg. The boom is fastened directly to the video head of any sturdy tripod, in the same way you would attach your camera, and it can be mounted using both 1/4” and 3/8” screws. On the end of the...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague K10 (K-10) CamCrane Camera Jib with Stand & Powerhead
Hague K10 CamCrane
Attention
Estimated 2-3 working days*
£450.00
£540.00 inc VAT
Close
Hague K10 CamCrane
Hague K10 (K-10) CamCrane Camera Jib with Stand & Powerhead
Attention
Estimated 2-3 working days*
£450.00
£540.00 inc VAT
Please note: accessories pictured are NOT included. See included tab for full contents. The Hague CamCrane K10 is quick and simple to set up, it is supplied with its own stand and a remote controlled pan & tilt Power Head. The stand's height is adjustable from 1.1 to 1.4 metres high. Standard bar weights (not supplied) are used for counterbalance, these are...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague DRIVE (DRI-VE) Camslide Drive Carbon Fibre Camera Slider with Auto Pan - 80cm
Hague DRIVE Camslide Slider
Attention
Estimated 2-3 working days*
£240.00
£288.00 inc VAT
Close
Hague DRIVE Camslide Slider
Hague DRIVE (DRI-VE) Camslide Drive Carbon Fibre Camera Slider with Auto Pan - 80cm
Attention
Estimated 2-3 working days*
£240.00
£288.00 inc VAT
The Hague Camslide Drive carbon fibre camera slider will automatically pan the camera whilst you concentrate on the sliding. This ingenious design makes it so much easier to pan and slide at the same time as you only have to concentrate on the one movement. Made from lightweight carbon fibre the Hague Camslide Drive has a smooth design and provides a...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague K18-UPH (K18UPH) CamCrane Camera Jib with Underslung Powerhead
K18-UPH CamCrane
Attention
Estimated 2-3 working days*
£860.00
£1,032.00 inc VAT
Close
K18-UPH CamCrane
Hague K18-UPH (K18UPH) CamCrane Camera Jib with Underslung Powerhead
Attention
Estimated 2-3 working days*
£860.00
£1,032.00 inc VAT
The Hague CamCrane K18 with UPH Underslung Pan & Tilt Power Head is quick and simple to set up, it attaches to any sturdy 100 or 75mm "bowl type" tripod or can be supplied with the optional Hague Dolly D3. It’s ideal for both handheld camcorders and DSLR cameras up to 2kg (4.4lbs) in weight. Once balanced the camera can smoothly...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague K12 (K-12) Multi Jib Camera Crane
Hague K12 Multi Jib
Attention
Estimated 2-3 working days*
£625.00
£750.00 inc VAT
Close
Hague K12 Multi Jib
Hague K12 (K-12) Multi Jib Camera Crane
Attention
Estimated 2-3 working days*
£625.00
£750.00 inc VAT
Please note: does NOT include tripod, dolly, video head, power head, camera, weights and bag.   The Hague K12 Multi Jib fastens to any sturdy tripod with a 100 or 75mm bowl or onto a Hague D3 Dolly. It is quick and simple to set up and can be used at three different lengths. At its standard or short length it will support...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague SM4 (SM-4) dual limpet / suction car mount kit for cameras / camcorders up to 3Kg (6.6lbs)
Hague SM4 Car Mount Kit
Green tick
2 in stock
£150.00
£180.00 inc VAT
Close
Hague SM4 Car Mount Kit
Hague SM4 (SM-4) dual limpet / suction car mount kit for cameras / camcorders up to 3Kg (6.6lbs)
Green tick
2 in stock
£150.00
£180.00 inc VAT
The Double Suction Mount has two strong suction pads, which can be attached to any flat non-porous surface, these give the camera mount extra stability. It has a large camera plate which supports the camera over a greater area preventing any movement in the camera's plastic casing. A double ball bracket, along with the tubular structure, enable the camera to...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague CSLID (CS-LID) Camslide Camera Slider Rail
Camslide Slider Rail
Green tick
1 in stock
£125.00
£150.00 inc VAT
Close
Camslide Slider Rail
Hague CSLID (CS-LID) Camslide Camera Slider Rail
Green tick
1 in stock
£125.00
£150.00 inc VAT
The Hague Camslide is quick and simple to set up and it can be mounted to any sturdy tripod or placed on a table or the floor for low shots. Either a ball levelling head or a tripod video head (both optional extras) can be attached to the carriage which would allow you to set the camera to the desired...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague K5 (K-5) Compact Pro Jib
K5 Compact Pro Jib
Attention
Estimated 2-3 working days*
£250.00
£300.00 inc VAT
Close
K5 Compact Pro Jib
Hague K5 (K-5) Compact Pro Jib
Attention
Estimated 2-3 working days*
£250.00
£300.00 inc VAT
The Hague Compact Pro Jib is a traditional camera jib which is compact, lightweight and easy to transport. It utilises the video head and the legs of your own tripod and you can operate the jib from either end. At the camera end you will be able to both pan and tilt, crane up and down and pan the jib...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague K14 (K-14) Pro-Jib Camera Crane
Hague K14 Pro-Jib
Attention
Estimated 2-3 working days*
£400.00
£480.00 inc VAT
Close
Hague K14 Pro-Jib
Hague K14 (K-14) Pro-Jib Camera Crane
Attention
Estimated 2-3 working days*
£400.00
£480.00 inc VAT
The Hague K14 Pro Jib has been designed for use with heavier cameras and will support a maximum weight of 14 kilos. The telescopic counterbalancing arm uses standard bar weights for counterbalance (not supplied). All axis points have radial ball bearings giving an effortlessly smooth vertical crane movement of 2 metres. The Jib is supplied with a 100mm bowl which enables you...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague E640 (640) Camslide Easyglide 640 Camera Slider Rail - 640mm
Hague E640 Slider Rail
Attention
Estimated 2-3 working days*
£150.00
£180.00 inc VAT
Close
Hague E640 Slider Rail
Hague E640 (640) Camslide Easyglide 640 Camera Slider Rail - 640mm
Attention
Estimated 2-3 working days*
£150.00
£180.00 inc VAT
Please note: Camera, Video Head, Ball Head and Tripod NOT included The Hague Camslide Easyglide 640 is quick and simple to set up, it can be mounted to any sturdy tripod or placed on a table, or on the floor for low shots. The camera can be fastened directly to the carriage, or an optional Video or Ball Levelling Head can...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague K18-PH200 (K18PH200) CamCrane Camera Jib with Pro Pan & Tilt Powerhead
K18-PH200 CamCrane
Attention
Estimated 2-3 working days*
£1,600.00
£1,920.00 inc VAT
Close
K18-PH200 CamCrane
Hague K18-PH200 (K18PH200) CamCrane Camera Jib with Pro Pan & Tilt Powerhead
Attention
Estimated 2-3 working days*
£1,600.00
£1,920.00 inc VAT
The Hague CamCrane K18 with the joystick controlled PH200 Pro Pan & Tilt Power Head is quick and simple to set up, it attaches to any sturdy 100 or 75mm "bowl type" tripod or can be supplied with the optional Hague Dolly D3. It’s ideal for both handheld camcorders and DSLR cameras up to 4kg (8.8lbs) in weight. Once balanced the...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague PH200 (PH-200) Pro Pan & Tilt Camera Powerhead - 360 Degrees
PH200 Pan & Tilt Powerhead
Attention
Estimated 2-3 working days*
£1,000.00
£1,200.00 inc VAT
Close
PH200 Pan & Tilt Powerhead
Hague PH200 (PH-200) Pro Pan & Tilt Camera Powerhead - 360 Degrees
Attention
Estimated 2-3 working days*
£1,000.00
£1,200.00 inc VAT
Please note: Optional extras such as jib, camera, dolly, tripod, monitor or half ball shown in pictures NOT included. The D8CB Claw Ball is required to attach the PH200 to a jib bowl as pictured. The Hague PH200 Pro Remote Pan & Tilt Power Head can be mounted to a tripod, jib, crane or wall bracket. It can be mounted vertically...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague SM8KIT (SM8-KIT) Camera Suction Mount Kit for Cars
Hague SM8KIT Car Suction Kit
Attention
Estimated 2-3 working days*
£300.00
£360.00 inc VAT
Close
Hague SM8KIT Car Suction Kit
Hague SM8KIT (SM8-KIT) Camera Suction Mount Kit for Cars
Attention
Estimated 2-3 working days*
£300.00
£360.00 inc VAT
Please note: Camera and other accessories pictured NOT included. See included tab for contents of kit. The Hague SM8 camera suction mount for cars can be used in a variety of ways to mount a camcorder or stills camera almost anywhere onto a vehicle. It consists of several interchangeable parts which can all be purchased separately if additional units are required. Often...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague D10 (D-10) Camera Skater Ladder Dolly
Hague D10 Skater Ladder Dolly
Attention
Estimated 2-3 working days*
£240.00
£288.00 inc VAT
Close
Hague D10 Skater Ladder Dolly
Hague D10 (D-10) Camera Skater Ladder Dolly
Attention
Estimated 2-3 working days*
£240.00
£288.00 inc VAT
Please note: Camera, track and tripod head NOT included The Hague dual purpose Skater Ladder Dolly runs on any smooth, flat surface and the wheels can be set to track in a straight line or angled to track round an object. The Hague Skater Ladder Dolly also runs on a ladder to create tracking shots over any terrain. The high quality wheels have...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague K2WS (K2-WS) Junior Camera Jib with Stand
Hague K2WS Junior Jib
Attention
Estimated 4-6 weeks*
£249.00
£298.80 inc VAT
Close
Hague K2WS Junior Jib
Hague K2WS (K2-WS) Junior Camera Jib with Stand
Attention
Estimated 4-6 weeks*
£249.00
£298.80 inc VAT
The Hague K2WS Junior Jib fastens directly onto the sturdy stand. It has an adjustable telescopic column with a minimum height of 110cm and a maximum height of 188cm. The column can be locked at the required height and there is a safety pin to prevent the column slipping. It is ideal if you do not have a suitable sturdy...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague D7 (D-7) Aluminium Ride On Tracker / Dolly
Hague D7 Ride On Tracker / Dolly
Attention
Estimated 2-3 working days*
£850.22
£1,020.26 inc VAT
Close
Hague D7 Ride On Tracker / Dolly
Hague D7 (D-7) Aluminium Ride On Tracker / Dolly
Attention
Estimated 2-3 working days*
£850.22
£1,020.26 inc VAT
The Hague Tracker D7 is quick and simple to set up, it enables you to create super smooth tracking shots on location or in the studio. An aluminium frame forms the base of the "ride on" tracking dolly and attached to this is a telescopic column with a 100mm bowl & claw-ball leveller onto which you can fasten your video...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague E1000 (E-1000) Camslide Easyglide 1000 Camera Slider
Hague E1000 Camslide Slider
Attention
Estimated 2-3 working days*
£165.00
£198.00 inc VAT
Close
Hague E1000 Camslide Slider
Hague E1000 (E-1000) Camslide Easyglide 1000 Camera Slider
Attention
Estimated 2-3 working days*
£165.00
£198.00 inc VAT
Please note: Camera and other accessories pictured NOT included The Hague Camslide Easyglide 1000 is quick and simple to set up, it can be mounted to any sturdy tripod or placed on a table, or on the floor for low shots. The camera can be fastened directly to the carriage, or an optional Video or Ball Levelling Head can be used...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague D7T (D7-T, D7) Extra Track for Tracker - 2 metre
Hague D7T Extra Track
Attention
Estimated 2-3 working days*
£72.49
£86.99 inc VAT
Close
Hague D7T Extra Track
Hague D7T (D7-T, D7) Extra Track for Tracker - 2 metre
Attention
Estimated 2-3 working days*
£72.49
£86.99 inc VAT
Extra Track for D7 Tracker/Dolly. 2 Metres Length...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague D7C (D7-C, D7) Extra Track Connectors X 2
D7C Extra Track Connectors
Attention
Extended lead time
£15.00
£18.00 inc VAT
Close
D7C Extra Track Connectors
Hague D7C (D7-C, D7) Extra Track Connectors X 2
Attention
Extended lead time
£15.00
£18.00 inc VAT
Extra Track Connectors for the D7 Hague D7 Tracker / Dolly....
Full Details
Add to Basket

Camera Support Rigs

Quick Info
Add to Basket
Hague CFSLR (CF-SLR) Camframe Camera Cage Steady Mount
Hague CFSLR Camframe Cage
Green tick
5 in stock
£38.00
£45.60 inc VAT
Close
Hague CFSLR Camframe Cage
Hague CFSLR (CF-SLR) Camframe Camera Cage Steady Mount
Green tick
5 in stock
£38.00
£45.60 inc VAT
Please note: camera and other accessories pictured NOT included The CFSLR Hague Digital SLR Camframe Camera Cage has been designed to hold DSLR type cameras. These HD digital cameras, such as the Canon EOS 5D MK III and Lumix GH4 produce great HD video but are difficult to hold for handheld filming. The Digital SLR Camframe has been specifically designed to hold...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague CSM (C-SM) Camera Shoulder Mount Camera Rig
Hague CSM Shoulder Mount
Green tick
2 in stock
£41.50
£49.80 inc VAT
Close
Hague CSM Shoulder Mount
Hague CSM (C-SM) Camera Shoulder Mount Camera Rig
Green tick
2 in stock
£41.50
£49.80 inc VAT
Please note: Camera pictured NOT included The Hague CSM Camera Shoulder Mount Rig is made of aluminium which can be bent to enable a snug fit onto the shoulder. It's design allows plenty of room for the right hand to be used on the cameras controls or to focus the camera. A handgrip below the camera allows the left or right...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague DSR (D-SR) Dual Shoulder Camera Support Rig
Hague DSR Dual Shoulder Rig
Attention
Estimated 2-3 working days*
£150.00
£180.00 inc VAT
Close
Hague DSR Dual Shoulder Rig
Hague DSR (D-SR) Dual Shoulder Camera Support Rig
Attention
Estimated 2-3 working days*
£150.00
£180.00 inc VAT
Please note: camera pictured NOT included. The Hague Dual Shoulder Camera Support Rig is an ideal rig for both camcorders and DSLRs. It is based on the standard 15mm x 60mm pitch rod system, so it can be used in conjunction with other manufacturer’s components, such as follow focus systems, or parts of the Hague support can be added to other...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague PWB (P-W-B) Powerhead Wall Bracket for PH, MPH and PH100 Power Heads
Hague Wall Bracket
Attention
Estimated 2-3 working days*
£34.00
£40.80 inc VAT
Close
Hague Wall Bracket
Hague PWB (P-W-B) Powerhead Wall Bracket for PH, MPH and PH100 Power Heads
Attention
Estimated 2-3 working days*
£34.00
£40.80 inc VAT
Please Note: Wall Bracket only, Power head not included. The Hague PWB Powerhead Wall Bracket is a sturdy wall bracket which is suitable for the Hague PH, MPH and PH100 Remote Pan & Tilt Power Heads. It enables the Power Head to be mounted to a wall with enough clearance from the wall to allow the camera to pan and tilt...
Full Details
Add to Basket
Quick Info
Add to Basket
Hague HD90 (HD-90) Heavy Duty 90° Right Angle Tripod Camera Mount
Hague Heavy Duty Plate
Attention
Estimated 2-3 working days*
£100.00
£120.00 inc VAT
Close
Hague Heavy Duty Plate
Hague HD90 (HD-90) Heavy Duty 90° Right Angle Tripod Camera Mount
Attention
Estimated 2-3 working days*
£100.00
£120.00 inc VAT
The Hague Heavy Duty 90° Right Angle Tripod Camera Mount has been designed for people looking to shoot in portrait mode and is suitable for a wide variety of camera set-ups. It allows you to mount the camera at a 90 degrees angle on your own tripod and is ideal for portrait filming.  The bracket has a variety of threaded holes...
Full Details
Add to Basket
Shopping Basket 0 Item(s):
£0.00
Estimated Shipping:
Shipping Details
Available Shipping Price
--
:
£0.00

Back

Feedback

Latest Products

1
2
3
4
5
6
7
8
9
10
Copyright © 1986-2017 | CVP Group | CVP Blog E&OE 27 June 2017 21:48 BST

Subject to status. Terms and Conditions apply. Creative Video Productions Ltd acts as a broker and offers finance from a restricted range of finance providers.
Finance provided by PayPal Credit, a trading name of PayPal (Europe) S.à r.l. et Cie, S.C.A., 22-24 Boulevard Royal L-2449, Luxembourg