This website uses cookies. By continuing to browse the site you are agreeing to our use of cookies.

You are in:
>
>
(Found 15)

Quick Info
Add to Basket
Zacuto 1/2 Inch Adapter - Z-DADPT (ZDADPT)
Zacuto 1/2 Inch Adapter
Green tick
4 in stock
£12.49
£14.99 inc VAT
Close
Zacuto 1/2 Inch Adapter
Zacuto 1/2 Inch Adapter - Z-DADPT (ZDADPT)
Green tick
4 in stock
£12.49
£14.99 inc VAT
Zacuto 1/2 Inch Adapter - Z-DADPT...
Full Details
Add to Basket
Quick Info
Add to Basket
Peak Design CB-8L (CB8L) Long Clamping Bolts (x2) for mounting Capture v2 Camera Clip
Peak Design CB-8L Bolts
Attention
Estimated < 2 weeks*
£8.29
£9.95 inc VAT
Close
Peak Design CB-8L Bolts
Peak Design CB-8L (CB8L) Long Clamping Bolts (x2) for mounting Capture v2 Camera Clip
Attention
Estimated < 2 weeks*
£8.29
£9.95 inc VAT
A set of 2 long clamping bolts for Capture (v2 models only), CapturePRO, CaptureBINO and CaptureP.O.V., allowing the clip to fit around thicker straps. Recommended for straps that are thicker than 0.5 in (1.3 cm). Note that these are the same clamping bolts that come with the PROpad™, CaptureP.O.V. and P.O.V. Kit....
Full Details
Add to Basket
Quick Info
Add to Basket
Peak Design CB-8 (CB8) Replacement Clamping Bolts (x2) for Capture Camera Clips
Peak Design CB-8 Bolts
Attention
Estimated < 2 weeks*
£8.29
£9.95 inc VAT
Close
Peak Design CB-8 Bolts
Peak Design CB-8 (CB8) Replacement Clamping Bolts (x2) for Capture Camera Clips
Attention
Estimated < 2 weeks*
£8.29
£9.95 inc VAT
A replacement or backup set of 2 standard clamping bolts for Capture (v2 models only), CapturePRO, CaptureP.O.V. or CaptureBINO. Turned anodized aluminium heads with stainless steel shafts....
Full Details
Add to Basket
Quick Info
Add to Basket
Freefly 910-00245 (91000245) MoVI XL to Mitchell Adapter
Freefly MoVI XL to Mitchell Adapter
Attention
Estimated 4-6 weeks*
£412.08
£494.50 inc VAT
Close
Freefly MoVI XL to Mitchell Adapter
Freefly 910-00245 (91000245) MoVI XL to Mitchell Adapter
Attention
Estimated 4-6 weeks*
£412.08
£494.50 inc VAT
MoVI XL features a 6 bolt pattern allowing users to mount the gimbal to a variety of devices.  The MoVI XL to Mitchell Adapter adapts the 6 bolt pattern to a standard Mitchell Mount. This can be used with or without the MoVI XL. Freefly sets the gimbals up to use the Quick Release system as it allows for much faster...
Full Details
Add to Basket
Quick Info
Add to Basket
Rowa 404107-1 (404107-1) Accessory Cube with 5 3/8 Inch Thread Holes and 1 Screw For Mounting
Rowa Accessory Cube
Attention
Estimated < 7 working days*
£51.72
£62.06 inc VAT
Close
Rowa Accessory Cube
Rowa 404107-1 (404107-1) Accessory Cube with 5 3/8 Inch Thread Holes and 1 Screw For Mounting
Attention
Estimated < 7 working days*
£51.72
£62.06 inc VAT
The Rowa Accessory Cube comes with 5 mounting options as there is 5 3/8 Inch thread holes compatible with cameras with a 3/8 Inch Screws, the cube also comes with a screw to be able to mount itself. All Parts are made from high strength aluminium or stainless steel....
Full Details
Add to Basket
Quick Info
Add to Basket
Rowa 404111-5 (404111-5) Miniature Arm Connecter
Rowa Miniature Arm
Attention
Estimated < 7 working days*
£16.38
£19.66 inc VAT
Close
Rowa Miniature Arm
Rowa 404111-5 (404111-5) Miniature Arm Connecter
Attention
Estimated < 7 working days*
£16.38
£19.66 inc VAT
All Rowa arms are built from high-Quality Aluminium and the crews are coated in stainless steel. The arms are very flexible and strong, the components can be mounted together to hold cameras on to objects for example Moto-Cross-Cycles. The Miniature Arm Connecter is an essential component for putting together An Arm...
Full Details
Add to Basket
Quick Info
Add to Basket
Rowa 404111-4M (404111-4M) Ball Adapter with a male 1/4 Inch UNC Screw
Rowa 1/4 Ball Adapter
Attention
Estimated < 7 working days*
£13.79
£16.55 inc VAT
Close
Rowa 1/4 Ball Adapter
Rowa 404111-4M (404111-4M) Ball Adapter with a male 1/4 Inch UNC Screw
Attention
Estimated < 7 working days*
£13.79
£16.55 inc VAT
All Rowa arms are built from high-Quality Aluminium and the crews are coated in stainless steel. The arms are very flexible and strong, the components can be mounted together to hold cameras on to objects for example Moto-Cross-Cycles. The 1/4 Ball Adapter is an essential component for putting together an Arm....
Full Details
Add to Basket
Quick Info
Add to Basket
Rowa 404111-3M (404111-3M) Ball Adapter With a male 3/8 Inch UNC Screw
Rowa 3/8 Ball Adapter
Attention
Estimated < 7 working days*
£14.66
£17.59 inc VAT
Close
Rowa 3/8 Ball Adapter
Rowa 404111-3M (404111-3M) Ball Adapter With a male 3/8 Inch UNC Screw
Attention
Estimated < 7 working days*
£14.66
£17.59 inc VAT
All Rowa arms are built from high-Quality Aluminium and the crews are coated in stainless steel. The arms are very flexible and strong, the components can be mounted together to hold cameras on to objects for example Moto-Cross-Cycles. The 3/8 Ball Adapter is an essential component for putting together an Arm....
Full Details
Add to Basket
Quick Info
Add to Basket
Peak Design PL-PP-1 (PLPP1) PROplate Quick-Release Plate compatible with Manfrotto RC2 and ARCA-type Tripod Heads
Peak Design PROplate Quick-Release Plate
Attention
Estimated < 2 weeks*
£20.79
£24.95 inc VAT
Close
Peak Design PROplate Quick-Release Plate
Peak Design PL-PP-1 (PLPP1) PROplate Quick-Release Plate compatible with Manfrotto RC2 and ARCA-type Tripod Heads
Attention
Estimated < 2 weeks*
£20.79
£24.95 inc VAT
Everything you could possibly want in one quick-release plate. PROplate works in ARCA-type tripod heads, and can also be configured to fit in both ARCA and most Manfrotto® RC2 tripod heads (see the full list of compatible tripods here). Slides into Capture in 4 directions. Contains 4 loops for Peak Design Anchors. Machined/anodized aluminium construction....
Full Details
Add to Basket
Quick Info
Add to Basket
Peak Design PDS-1 (PDS1) PROdrive Screw D-ring Screw for attaching Micro Anchors to the base of your camera
Peak Design PDS-1 PROdrive Screw
Attention
Estimated < 2 weeks*
£8.74
£10.49 inc VAT
Close
Peak Design PDS-1 PROdrive Screw
Peak Design PDS-1 (PDS1) PROdrive Screw D-ring Screw for attaching Micro Anchors to the base of your camera
Attention
Estimated < 2 weeks*
£8.74
£10.49 inc VAT
Attach any Peak Design strap directly to the tripod mount on your camera without using a Peak Design quick-release plate. PROdrive Screw also works with other sling-style straps like those made by Black Rapid. Load-bearing D-ring folds flat when not in use....
Full Details
Add to Basket
Quick Info
Add to Basket
Rowa 404108-1 (4041081) Accessory Block With 13 3/8 Thread Holes and 1 Screw for mounting
Rowa Accessory Block
Attention
Estimated < 7 working days*
£77.59
£93.11 inc VAT
Close
Rowa Accessory Block
Rowa 404108-1 (4041081) Accessory Block With 13 3/8 Thread Holes and 1 Screw for mounting
Attention
Estimated < 7 working days*
£77.59
£93.11 inc VAT
The Rowa Accessory Block is the rectangle version of the Accessory Cube however because the block is an extended version it has 13 mounting options as it has 13 3/8 Inch Thread holes and a 3/8 Inch UNC Screw. All Parts are made from high strength aluminium or stainless steel. ...
Full Details
Add to Basket
Quick Info
Add to Basket
Manfrotto 208 (20-8) Camera Mounting Adapter
Camera Mounting Adapter
Attention
Estimated < 2 weeks*
£16.86
£20.23 inc VAT
Close
Camera Mounting Adapter
Manfrotto 208 (20-8) Camera Mounting Adapter
Attention
Estimated < 2 weeks*
£16.86
£20.23 inc VAT
Allows use of 3/8' camera mounting plate in to 16mm socket. Compatible with 035 Super Clamp and 484RC2 or 486RC2 Ball Head for example. Diameter: 59.5mm....
Full Details
Add to Basket
Quick Info
Add to Basket
Peak Design PL-M1 (PLM1) Micro Plate 2-way ARCA compatible PROplate for slim-body Cameras
Peak Design Micro Plate
Attention
Estimated < 2 weeks*
£20.82
£24.98 inc VAT
Close
Peak Design Micro Plate
Peak Design PL-M1 (PLM1) Micro Plate 2-way ARCA compatible PROplate for slim-body Cameras
Attention
Estimated < 2 weeks*
£20.82
£24.98 inc VAT
MICROplate is made for slim-body camera users that require a quick-release plate with a very small footprint to avoid obstruction of the lens or battery compartment. ARCA-type tripod compatible, slides into Capture® in 2 directions and has 1 loop for hand straps or Peak Design Anchors. Machined/anodized construction. Note that MICROplate no longer comes with a D-ring connection screw. Instead...
Full Details
Add to Basket
Quick Info
Add to Basket
Peak Design PL-S1 (PLS1) Standard Plate Compatible with ARCA-Type Tripods
Peak Design Standard Plate
Attention
Estimated < 2 weeks*
£14.99
£17.99 inc VAT
Close
Peak Design Standard Plate
Peak Design PL-S1 (PLS1) Standard Plate Compatible with ARCA-Type Tripods
Attention
Estimated < 2 weeks*
£14.99
£17.99 inc VAT
Standard Plate is the quick-release plate that comes with the standard Capture Camera Clip. It's compatible with most ARCA-type tripods (view full compatibility list here), fits in Capture in 4 directions, and contains 4 loops for connecting Peak Design Anchors. Die-cast/powdercoated construction....
Full Details
Add to Basket
Quick Info
Add to Basket
SmallRig 828 (SR828) Double Head Stud with 1/4in to 1/4in Thread
828 Double Head Stud
Attention
Estimated 4-6 weeks*
£3.33
£4.00 inc VAT
Close
828 Double Head Stud
SmallRig 828 (SR828) Double Head Stud with 1/4in to 1/4in Thread
Attention
Estimated 4-6 weeks*
£3.33
£4.00 inc VAT
The SmallRig Double Head Stud 1/4-1/4 comes with standard 1/4"-20 thread on both ends. It works with any accessories with 1/4”-20 thread. There are 2x Double Head Studs included....
Full Details
Add to Basket
Shopping Basket 0 Item(s):
£0.00
Estimated Shipping:
Shipping Details
Available Shipping Price
--
:
£0.00

Back

Your Selection
Support Rigs
Feedback
Hot Deals Side
Copyright © 1986-2017 | CVP Group | CVP Blog E&OE 27 June 2017 04:50 BST

Subject to status. Terms and Conditions apply. Creative Video Productions Ltd acts as a broker and offers finance from a restricted range of finance providers.
Finance provided by PayPal Credit, a trading name of PayPal (Europe) S.à r.l. et Cie, S.C.A., 22-24 Boulevard Royal L-2449, Luxembourg