This website uses cookies. By continuing to browse the site you are agreeing to our use of cookies.

You are in:
>
>
(Found 37)

Quick Info
Add to Basket
CineDesign CDL-AIS-ADP active interface shoe to 1/4inch thread adaptor for use mounting standard 1/4inch accessories
CineDesign CDL-AIS-ADP
Green tick
42 in stock
£8.99
Was: £9.99
£10.79 inc VAT
Close
CineDesign CDL-AIS-ADP
CineDesign CDL-AIS-ADP active interface shoe to 1/4inch thread adaptor for use mounting standard 1/4inch accessories
Green tick
42 in stock
Limited Offer Price (Was £9.99)
£8.99
£10.79 inc VAT
This useful little adaptor slots onto the bespoke Sony AIS shoe and allows the mounting of any accessory with a 1/4" female thread - Ideal for mounting lights, microphones etc......
Full Details
Add to Basket
Quick Info
Add to Basket
Wooden Camera, 1/4-20 Hot Shoe Mount (p/n 142000)
Wooden Camera Hot Shoe
Green tick
17 in stock
£20.00
£24.00 inc VAT
Close
Wooden Camera Hot Shoe
Wooden Camera, 1/4-20 Hot Shoe Mount (p/n 142000)
Green tick
17 in stock
£20.00
£24.00 inc VAT
This hot shoe mount from Wooden Camera Replicates the flash shoe found on still cameras. Attaches to any 1/4-20 threaded hole. Great for mounting on-camera lights, microphone shock mounts, flashes, and more....
Full Details
Add to Basket
Quick Info
Select Option
Movcam 303-2202 (3032202) Riser Block for the 303-2201 Cage to fit Sony a7s
Movcam a7s Riser Block
Green tick
88 in stock
£74.49
£89.39 inc VAT
Close
Movcam a7s Riser Block
Movcam 303-2202 (3032202) Riser Block for the 303-2201 Cage to fit Sony a7s
Green tick
88 in stock
£74.49
£89.39 inc VAT
Riser Block to fit the Movcam 303-2201 cage for the Sony a7s. To be used with the 303-2203 LWS Base Plate. Please Note: The 303-2200 kit (available separately) includes the riser plate and LWS base plate with the a7s cage as standard....
Full Details
Select Option
Quick Info
Add to Basket
Rycote 037303 Short Hot Shoe Extension (10cm) Suitable for Male Flash Shoe Accessories
Rycote 037303 Shoe Extension
Green tick
7 in stock
£19.50
£23.40 inc VAT
Close
Rycote 037303 Shoe Extension
Rycote 037303 Short Hot Shoe Extension (10cm) Suitable for Male Flash Shoe Accessories
Green tick
7 in stock
£19.50
£23.40 inc VAT
The Hot Shoe Extension allows you to fit multiple attachments such as lights and additional mics to your single hot shoe on your camera/camcorder. Because the Hot shoe Extension can rotate 360° around the shoe fixture on the camera, your microphone can be easily moved out of shot and also adjusted to achieve the optimum balance. This essential, yet affordable...
Full Details
Add to Basket
Quick Info
Add to Basket
Rycote 037705 Hot Shoe Extension (20cm) suitable for male flash shoe accessories
Rycote 037705 Shoe Extension
Green tick
2 in stock
£23.00
£27.60 inc VAT
Close
Rycote 037705 Shoe Extension
Rycote 037705 Hot Shoe Extension (20cm) suitable for male flash shoe accessories
Green tick
2 in stock
£23.00
£27.60 inc VAT
The Hot Shoe Extension allows you to fit multiple attachments such as lights and additional mics to your single hot shoe on your camera/camcorder. Because the Hot shoe Extension can rotate 360° around the shoe fixture on the camera, your microphone can be easily moved out of shot and also adjusted to achieve the optimum balance. This essential, yet affordable...
Full Details
Add to Basket
Quick Info
Add to Basket
Movcam 303-1708 (3031708) Cold Shoe Block
Movcam 303-1708 Cold Shoe
Green tick
2 in stock
£31.80
£38.16 inc VAT
Close
Movcam 303-1708 Cold Shoe
Movcam 303-1708 (3031708) Cold Shoe Block
Green tick
2 in stock
£31.80
£38.16 inc VAT
This is a Movcam 303-1708 cold shoe block....
Full Details
Add to Basket
Quick Info
Add to Basket
Movcam 303-2402 Riser Block for 303-2401 A7S II A7R II Cage (3032402)
Movcam A7SII A7RII Riser Block
Green tick
In stock 1-2 days
£74.49
£89.39 inc VAT
Close
Movcam A7SII A7RII Riser Block
Movcam 303-2402 Riser Block for 303-2401 A7S II A7R II Cage (3032402)
Green tick
In stock 1-2 days
£74.49
£89.39 inc VAT
Riser Block to attach the Movcam 303-2401 A7SII / A7RII Cage to the 303-2203 LWS Baseplate. Supplied as standard if you buy the 303-2400 Accessories Kit....
Full Details
Add to Basket
Quick Info
Add to Basket
Freefly MoVI M5 Hot Shoe Mount (910-00038)
M5 Hot Shoe Mount
Green tick
5 in stock
£15.95
£19.14 inc VAT
Close
M5 Hot Shoe Mount
Freefly MoVI M5 Hot Shoe Mount (910-00038)
Green tick
5 in stock
£15.95
£19.14 inc VAT
Ultra lightweight hot shoe mount for the MōVI M5 Adjustable Top Camera Plate. ...
Full Details
Add to Basket
Quick Info
Add to Basket
Teradek (TER-CUBIT010) CUBIT-010 1.1-inch Hotshoe Mounting Adapter for CUBE Encoders and Decoders
Teradek CUBIT-010 Adapter
Green tick
In stock 1-2 days
£25.00
£30.00 inc VAT
Close
Teradek CUBIT-010 Adapter
Teradek (TER-CUBIT010) CUBIT-010 1.1-inch Hotshoe Mounting Adapter for CUBE Encoders and Decoders
Green tick
In stock 1-2 days
£25.00
£30.00 inc VAT
Hotshoe Mounting Hardware for Cube - 1.1 inch Thumb Screw....
Full Details
Add to Basket
Quick Info
Add to Basket
Rycote 037701 20cm Hot Shoe Extension (2 x 3/8 Inch male adaptors), Suitable for mounting pair of microphones to (3/8 Inch) Mic stand
Rycote 037701 Shoe Extension
Green tick
22 in stock
£30.00
£36.00 inc VAT
Close
Rycote 037701 Shoe Extension
Rycote 037701 20cm Hot Shoe Extension (2 x 3/8 Inch male adaptors), Suitable for mounting pair of microphones to (3/8 Inch) Mic stand
Green tick
22 in stock
£30.00
£36.00 inc VAT
The Hot Shoe Extension allows you to fit multiple attachments such as lights and additional mics to your single hot shoe on your camera/camcorder. Because the Hot shoe Extension can rotate 360° around the shoe fixture on the camera, your microphone can be easily moved out of shot and also adjusted to achieve the optimum balance. This essential, yet affordable...
Full Details
Add to Basket
Quick Info
Add to Basket
Teradek (TER-BIT010) BIT-010 2.5-inch Hotshoe Mounting Adapter for Bond Cellular Transmitter
Teradek BIT-010 Adapter
Green tick
In stock 1-2 days
£30.00
£36.00 inc VAT
Close
Teradek BIT-010 Adapter
Teradek (TER-BIT010) BIT-010 2.5-inch Hotshoe Mounting Adapter for Bond Cellular Transmitter
Green tick
In stock 1-2 days
£30.00
£36.00 inc VAT
Hotshoe Mounting Hardware for Bond - 2.5 inch Thumb Screw....
Full Details
Add to Basket
Quick Info
Add to Basket
Redrock Micro 8-112-0001 (81120001) microMount with Cold Shoe Spud Assembly
microMount with Cold Shoe Spud
Green tick
4 in stock
£84.26
£101.11 inc VAT
Close
microMount with Cold Shoe Spud
Redrock Micro 8-112-0001 (81120001) microMount with Cold Shoe Spud Assembly
Green tick
4 in stock
£84.26
£101.11 inc VAT
The microMount with cold shoe spud provides an easy convenient way to  attach and position a shoe-mounted accessory to any 15mm rail. For the Canon EOS C300 this includes the C300-supplied  rotating monitor with integrated XLR inputs....
Full Details
Add to Basket
Quick Info
Add to Basket
Sony SMAD-P3 (SMADP3) Multi Interface Shoe for cable-free connection
Sony SMAD-P3 Shoe
Attention
Estimated < 2 weeks*
£33.15
£39.78 inc VAT
Close
Sony SMAD-P3 Shoe
Sony SMAD-P3 (SMADP3) Multi Interface Shoe for cable-free connection
Attention
Estimated < 2 weeks*
£33.15
£39.78 inc VAT
The wireless receiver of the UWP-D Series can be attached to camcorders or interchangeable-lens cameras that have an MI (Multi-Interface) shoe using the MI shoe adaptor SMAD-P3. This eliminates the need for connecting cables. By using the MI shoe adaptor, audio signals can be transmitted from the wireless receiver to a camera. In addition, the wireless receiver can get power...
Full Details
Add to Basket
Quick Info
Add to Basket
Vocas 0900-0008 (09000008) Light mount 1/4 inch- standard hot shoe mount
Vocas Light mount 1/4 inch
Attention
Estimated < 7 working days*
£19.75
£23.70 inc VAT
Close
Vocas Light mount 1/4 inch
Vocas 0900-0008 (09000008) Light mount 1/4 inch- standard hot shoe mount
Attention
Estimated < 7 working days*
£19.75
£23.70 inc VAT
This bracket fits on the 1/4" holes in top-handles of many cameras and functions as a standard hot shoe mount....
Full Details
Add to Basket
Quick Info
Add to Basket
Wooden Camera Shoe Handle Mount for Canon C100, C300, C500 Handles (p/n 161300)
Wooden Camera Handle Mount
Attention
Estimated 2-4 weeks*
£36.00
£43.20 inc VAT
Close
Wooden Camera Handle Mount
Wooden Camera Shoe Handle Mount for Canon C100, C300, C500 Handles (p/n 161300)
Attention
Estimated 2-4 weeks*
£36.00
£43.20 inc VAT
Shoe Handle Mount for original Canon C100, C300, C500 handles and LCD Monitors. 1/4-20 threaded hole at center. Attaches to two holes up to 18mm apart lengthwise and two holes between 33mm and 36mm widthwise. Also great for mounting on-camera lights, microphone shock mounts, flashes, and more....
Full Details
Add to Basket
Quick Info
Add to Basket
Teradek TER-BIT012 (TERBIT012) Hotshoe Mounting Hardware for Bolt 1.25 Inch Thumb Screw
Hotshoe Mounting Hardware
Attention
Estimated < 7 working days*
£17.33
£20.80 inc VAT
Close
Hotshoe Mounting Hardware
Teradek TER-BIT012 (TERBIT012) Hotshoe Mounting Hardware for Bolt 1.25 Inch Thumb Screw
Attention
Estimated < 7 working days*
£17.33
£20.80 inc VAT
Teradek BIT-012 Hotshoe Mounting Hardware for Bolt 1.25" Thumb Screw...
Full Details
Add to Basket
Quick Info
Add to Basket
Hawk-Woods HB-A1 (HBA1) Hot Bloc Adaptor for hot-shoe fitting to provide 3 more mounts
Hawk-Woods HB-A1
Attention
Estimated 2-3 working days*
£18.74
£22.49 inc VAT
Close
Hawk-Woods HB-A1
Hawk-Woods HB-A1 (HBA1) Hot Bloc Adaptor for hot-shoe fitting to provide 3 more mounts
Attention
Estimated 2-3 working days*
£18.74
£22.49 inc VAT
The Hot-Bloc system from Hawk-Woods is a range of products allowing you to maximise the potential of your cameras hot-shoe mount. It begins with a multi-functional hot-shoe adaptor, the HB-A1. This simply screws to the cameras existing hot-shoe fitting and provides 3 more hot-shoe mounts. So for the first time a camera operator can attach and power multiple hardware to...
Full Details
Add to Basket
Quick Info
Add to Basket
Manfrotto 143S (143-S) Flash Shoe, 1/4 inch Male Attachment
Manfrotto 143S Flash Shoe
Attention
Estimated < 2 weeks*
£8.29
£9.95 inc VAT
Close
Manfrotto 143S Flash Shoe
Manfrotto 143S (143-S) Flash Shoe, 1/4 inch Male Attachment
Attention
Estimated < 2 weeks*
£8.29
£9.95 inc VAT
Manfrotto 143S (143-S) Flash Shoe, 1/4 inch Male Attachment...
Full Details
Add to Basket
Quick Info
Add to Basket
Redrock Micro 2-112-0001 (21120001) Cold Shoe Mounting Spud
Cold Shoe Mounting Spud
Attention
Ordered on Request
£29.63
£35.56 inc VAT
Close
Cold Shoe Mounting Spud
Redrock Micro 2-112-0001 (21120001) Cold Shoe Mounting Spud
Attention
Ordered on Request
£29.63
£35.56 inc VAT
The Cold Shoe Mounting Spud is a machined accessory that enables you to attach a cold shoe-mounted accessory to rigs or camera setups. The Cold Shoe Spud is typically used in conjunction with a microMount or a grip rod to attach a Cold Shoe Accessory to any industry-standard 15mm rail. For the Canon EOS C300 this is extremely helpful to...
Full Details
Add to Basket
Quick Info
Add to Basket
Redrock Micro (2-129-0001) ultraCage Shoe Adapter for C100 Accessory Handle for attaching Canon EOS Cine Accessories to the ultraCage
Redrock ultraCage Shoe Adapter
Attention
Ordered on Request
£27.73
£33.28 inc VAT
Close
Redrock ultraCage Shoe Adapter
Redrock Micro (2-129-0001) ultraCage Shoe Adapter for C100 Accessory Handle for attaching Canon EOS Cine Accessories to the ultraCage
Attention
Ordered on Request
£27.73
£33.28 inc VAT
The Redrock Micro ultraCage Shoe Adapter attaches to the top of the front ultraCage or rear ultraCage chassis and enables shoe-mounted accessories to be attached to the ultraCage. Made of precision-machined aluminum the ultraCage Shoe Adapter screw tightly into the top of the cage for rock-solid support. The ultraCage Shoe Adapter’s most popular use is with the ultraCage C100 to mount the C100...
Full Details
Add to Basket
Quick Info
Add to Basket
Manfrotto 337 (33-7) Hot Shoe Bubble Level-2 Axis
Hot Shoe Bubble Level-2 Axis
Attention
Estimated < 2 weeks*
£24.99
£29.99 inc VAT
Close
Hot Shoe Bubble Level-2 Axis
Manfrotto 337 (33-7) Hot Shoe Bubble Level-2 Axis
Attention
Estimated < 2 weeks*
£24.99
£29.99 inc VAT
The 337 is a double axis spirit level that mounts to the hot shoe of any standard 35mm SLR camera to help you achieve a finer degree of accuracy and consistency in panoramic photo sequences....
Full Details
Add to Basket
Quick Info
Add to Basket
ARRI K2.66184.0 (K2661840) Cage Hot Shoe CHS-1 for DSLR Cameras
ARRI Cage Hot Shoe CHS-1
Attention
Estimated < 7 working days*
£43.42
£52.10 inc VAT
Close
ARRI Cage Hot Shoe CHS-1
ARRI K2.66184.0 (K2661840) Cage Hot Shoe CHS-1 for DSLR Cameras
Attention
Estimated < 7 working days*
£43.42
£52.10 inc VAT
Arri Cage Hot Shoe CHS-1 To prevent camera body flex. Compatible with DSLR Cameras....
Full Details
Add to Basket
Quick Info
Add to Basket
Lume Cube Hot Shoe Mount (LC-HS11)
Lume Cube LC-HS11
Attention
Estimated < 7 working days*
£22.91
£27.49 inc VAT
Close
Lume Cube LC-HS11
Lume Cube Hot Shoe Mount (LC-HS11)
Attention
Estimated < 7 working days*
£22.91
£27.49 inc VAT
The hot shoe mount can be used to attach your Lume Cube light (not included) to the top of your DSLR camera....
Full Details
Add to Basket
Quick Info
Add to Basket
Zacuto Zotshoe connects to the shoe of the camera and it is taped 1/4 20 - Z-HS (ZHS)
Zacuto Zotshoe
Attention
Estimated < 2 weeks*
£60.30
£72.36 inc VAT
Close
Zacuto Zotshoe
Zacuto Zotshoe connects to the shoe of the camera and it is taped 1/4 20 - Z-HS (ZHS)
Attention
Estimated < 2 weeks*
£60.30
£72.36 inc VAT
The Zotshoe connects to the shoe of the camera, and it is taped 1/4 20.Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty....
Full Details
Add to Basket
Quick Info
Add to Basket
Tilta ESR-TR01 (ESRTR01) 15mm Top Rod Adapter Compatible with the Alexa Mini Kit
Tilta ESR-TR01 15mm Rod Adapter
Attention
Estimated 4-6 weeks*
£219.87
£263.84 inc VAT
Close
Tilta ESR-TR01 15mm Rod Adapter
Tilta ESR-TR01 (ESRTR01) 15mm Top Rod Adapter Compatible with the Alexa Mini Kit
Attention
Estimated 4-6 weeks*
£219.87
£263.84 inc VAT
Tilta 15mm Top Rod Adapter Compatible with the Alexa Mini Kit - ESR-T06...
Full Details
Add to Basket
Quick Info
Add to Basket
RED Bolt-on Rosette-to-Swat Rail Adaptor, Compatible with the EPIC, SCARLET and RED ONE Cameras (790-0172)
Bolt-on Rosette-to-Swat Adaptor
Attention
Estimated 2-3 working days*
£60.00
£72.00 inc VAT
Close
Bolt-on Rosette-to-Swat Adaptor
RED Bolt-on Rosette-to-Swat Rail Adaptor, Compatible with the EPIC, SCARLET and RED ONE Cameras (790-0172)
Attention
Estimated 2-3 working days*
£60.00
£72.00 inc VAT
ROSETTE-TO-SWAT RAIL ADAPTOR (BOLT-ON) attaches to a rosette tap to provide 1/4-20 mounting points....
Full Details
Add to Basket
Quick Info
Add to Basket
ARRI K2.0000241 (K20000241) CHS-4 Cage Hot Shoe for the Blackmagic Pocket Camera
ARRI K2.0000241
Attention
Estimated < 7 working days*
£56.50
£67.80 inc VAT
Close
ARRI K2.0000241
ARRI K2.0000241 (K20000241) CHS-4 Cage Hot Shoe for the Blackmagic Pocket Camera
Attention
Estimated < 7 working days*
£56.50
£67.80 inc VAT
Arri Cage Hot Shoe CHS-4 for the Blackmagic Pocket Camera....
Full Details
Add to Basket
Quick Info
Add to Basket
Sony SMAD-V1//K (SMADV1K, SMADV1, SMAD-V1) V-Shoe Mount Adapter for LCS-URXP2 UWP Soft Case
Sony SMAD-V1//K
Attention
Estimated < 2 weeks*
£34.85
£41.82 inc VAT
Close
Sony SMAD-V1//K
Sony SMAD-V1//K (SMADV1K, SMADV1, SMAD-V1) V-Shoe Mount Adapter for LCS-URXP2 UWP Soft Case
Attention
Estimated < 2 weeks*
£34.85
£41.82 inc VAT
UWP V-Shoe Mount Adapter for URX-P2 portable receiver....
Full Details
Add to Basket
Shopping Basket 0 Item(s):
£0.00
Estimated Shipping:
Shipping Details
Available Shipping Price
--
:
£0.00

Back

Your Selection
Feedback
Hot Deals Side
Copyright © 1986-2017 | CVP Group | CVP Blog E&OE 29 April 2017 18:34 BST

Subject to status. Terms and Conditions apply. Creative Video Productions Ltd acts as a broker and offers finance from a restricted range of finance providers.
Finance provided by PayPal Credit, a trading name of PayPal (Europe) S.à r.l. et Cie, S.C.A., 22-24 Boulevard Royal L-2449, Luxembourg